The current state of this backup link. One of the
following values:
notActive - backup link not running because
this row has not yet been made
active
usingPrimary - backup link is running and using
the primary port
usingBackup - backup link test has failed; the
primary port has been disabled
and the backup port has been
enabled
Parsed from file hpicfGenRptr.mib.txt
Company: None
Module: HP-ICF-GENERIC-RPTR
The current state of this backup link. One of the
following values:
notActive - backup link not running because
this row has not yet been made
active
usingPrimary - backup link is running and using
the primary port
usingBackup - backup link test has failed; the
primary port has been disabled
and the backup port has been
enabled
Parsed from file HP-ICF-GENERIC-RPTR.mib
Module: HP-ICF-GENERIC-RPTR
Vendor: Hewlett-Packard
Module: HP-ICF-GENERIC-RPTR
[Automatically extracted from oidview.com]
hpicfBackupLinkState OBJECT-TYPE SYNTAX INTEGER { notActive(1), usingPrimary(2), usingBackup(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of this backup link. One of the following values: notActive - backup link not running because this row has not yet been made active usingPrimary - backup link is running and using the primary port usingBackup - backup link test has failed; the primary port has been disabled and the backup port has been enabled" ::= { hpicfBackupLinkEntry 9 }
hpicfBackupLinkState OBJECT-TYPE SYNTAX INTEGER { notActive(1), usingPrimary(2), usingBackup(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of this backup link. One of the following values: notActive - backup link not running because this row has not yet been made active usingPrimary - backup link is running and using the primary port usingBackup - backup link test has failed; the primary port has been disabled and the backup port has been enabled" ::= { hpicfBackupLinkEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.1 | hpicfBackupLinkIndex | 0 | 0 | The value of this object uniquely identifies this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.2 | hpicfBackupLinkPrimaryGroup | 0 | 0 | The group containing the primary port for this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.3 | hpicfBackupLinkPrimaryPort | 0 | 0 | The port number within the group of the primary port for this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.4 | hpicfBackupLinkBackupGroup | 0 | 0 | The group containing the backup port for this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.5 | hpicfBackupLinkBackupPort | 0 | 0 | The port number within the group of the backup port for this backup link. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.6 | hpicfBackupLinkAddress | 0 | 0 | The MAC address of the device to which periodic test packets are sent in order to determine if the primary link is operational. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.7 | hpicfBackupLinkTestTime | 0 | 0 | The frequency, in seconds, between sending periodic test packets. The test packet response timeout is fixed at 500ms. |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.8 | hpicfBackupLinkConsecFailures | 0 | 0 | The number of consecutive test packet failures which will cause the agent to switch to the backup port (i.e., backup port turned … |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.10 | hpicfBackupLinkFailEventIndex | 0 | 0 | The index of the eventEntry in the RMON MIB that will be triggered whenever the value of hpicfBackupLinkState changes from 'using… |
| 1.3.6.1.4.1.11.2.14.11.4.2.2.1.11 | hpicfBackupLinkStatus | 0 | 0 | The status of this entry. This object may not be set to 'active' unless the corresponding instance of hpicfBackupLinkAddress has… |