This is copy of pimInterfaceAddress with read-create
access. PIM uses this source address to send its
protocol packets out on this interface. This address can
be set to one of IP addresses of the interface or
255.255.255.255 if the address is determined dynamically
based on the current IP configuration.
The currently used source address is value of
pimInterfaceAddress in the latter case.
Parsed from file HP-ICF-PIM.mib
Module: HP-ICF-PIM
Vendor: Hewlett-Packard
Module: HP-ICF-PIM
[Automatically extracted from oidview.com]
hpicfPimIfAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This is copy of pimInterfaceAddress with read-create access. PIM uses this source address to send its protocol packets out on this interface. This address can be set to one of IP addresses of the interface or 255.255.255.255 if the address is determined dynamically based on the current IP configuration. The currently used source address is value of pimInterfaceAddress in the latter case." ::= { hpicfPimIfEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.2 | hpicfPimIfTrigHelloInterval | 0 | 0 | hpicfPimIftrigHelloInterval |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.3 | hpicfPimIfHelloHoldtime | 0 | 0 | The value set in the Holdtime field of Hello messages transmitted on this interface. This should be 3.5 times the value of pimIn… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.4 | hpicfPimIfLanPruneDelay | 0 | 0 | Turns the LAN Prune Delay Option off and on on this interface. Default is true. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.5 | hpicfPimIfPropagationDelay | 0 | 0 | The value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface. Default is 500 milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.6 | hpicfPimIfOverrideInterval | 0 | 0 | The value inserted into the Override Interval field of a LAN Prune Delay option on this interface. Default is 2500 milliseconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.7 | hpicfPimIfGenerationID | 0 | 0 | Turns the Generation ID Option off and on on this interface. Default is false. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.8 | hpicfPimIfJoinPruneHoldtime | 0 | 0 | The value inserted into the Holdtime field of a Join/ Prune message sent on this interface. The value should be 3.5 times pimInt… |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.9 | hpicfPimIfGraftRetryInterval | 0 | 0 | The interval a PIM router waits for a Graft Ack before re-sending a Graft on this interface. Default is 3 seconds. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.10 | hpicfPimIfMaxGraftRetries | 0 | 0 | The maximum number of times this router will re-send a Graft on this interface. Default is 2. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.11 | hpicfPimIfSRTTLThreshold | 0 | 0 | The Time To Live in a PIM-DM State Refresh message at which it is not forwarded on this interface. Default is 0. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.12 | hpicfPimIfLanDelayEnabled | 0 | 0 | Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.13 | hpicfPimIfSRCapable | 0 | 0 | Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.14 | hpicfPimIfDRPriority | 0 | 0 | The Designated Router Priority inserted into the DR priority option on this interface. Default is 1. |
| 1.3.6.1.4.1.11.2.14.11.5.1.20.1.1.6.1.15 | hpicfPimIfNBRTimeout | 0 | 0 | Time interval after which the router will consider a neighbour to not be present, if no PIM Hello messages arrived on the interfa… |