********* THIS OBJECT IS OBSOLETE *********
A list of backup link configuration entries. For
a given backup link, the hub will periodically
send a test packet to the device at the end of the
link. If there are no responses (the number is
configurable), the hub will enable the backup port
and disable the primary port. After the primary
link is fixed, the user must turn the primary port
on to resume normal operation.
At any time, the management station can look at
rptrPortAdminStatus for the backup port to
determine if it is currently in use.
The backup link algorithm enables and disables the
backup port by modifying rptrPortAdminStatus for
that port. After the backup port has been enabled
by the backup link algorithm, if the primary port
is subsequently enabled via the hub console port
or by a set of rptrPortAdminStatus, the backup
port will be turned off and the periodic test
packets will begin again.
When the backup link objects are set, the backup
port will be turned off, the primary port will be
turned on, and the periodic test packets will be
sent. The time between test packets is
configurable by setting hubBackupTestTime. The
number of failures needed to switch to the backup
link is configured by setting
hubBackupConsecutiveFails. The backup link
function can be turned off by setting
hubBackupPort to 0.
All five of the backup link objects must be set
together in a single PDU except for the case of
setting hubBackupPort to 0, in which case, the
hubBackupPort can be set without setting the other
objects. Currently, the size of the backup link
table is one; future releases may provide the
ability to monitor more than one backup link.
Parsed from file ICF-ETWIST.mib
Module: ICF-ETWIST
Vendor: Hewlett-Packard
Module: ICF-ETWIST
[Automatically extracted from oidview.com]
hubBkpLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF HubBkpLinkEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "********* THIS OBJECT IS OBSOLETE ********* A list of backup link configuration entries. For a given backup link, the hub will periodically send a test packet to the device at the end of the link. If there are no responses (the number is configurable), the hub will enable the backup port and disable the primary port. After the primary link is fixed, the user must turn the primary port on to resume normal operation. At any time, the management station can look at rptrPortAdminStatus for the backup port to determine if it is currently in use. The backup link algorithm enables and disables the backup port by modifying rptrPortAdminStatus for that port. After the backup port has been enabled by the backup link algorithm, if the primary port is subsequently enabled via the hub console port or by a set of rptrPortAdminStatus, the backup port will be turned off and the periodic test packets will begin again. When the backup link objects are set, the backup port will be turned off, the primary port will be turned on, and the periodic test packets will be sent. The time between test packets is configurable by setting hubBackupTestTime. The number of failures needed to switch to the backup link is configured by setting hubBackupConsecutiveFails. The backup link function can be turned off by setting hubBackupPort to 0. All five of the backup link objects must be set together in a single PDU except for the case of setting hubBackupPort to 0, in which case, the hubBackupPort can be set without setting the other objects. Currently, the size of the backup link table is one; future releases may provide the ability to monitor more than one backup link." ::= { icfHub 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.2.8.1 | hubBkpLinkIndex | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* The index value which uniquely identifies the backup link configuration entry to whic… |
| 1.3.6.1.4.1.11.2.14.2.8.2 | hubBackupPort | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* The port number of the backup link. Setting this object to zero removes the backup l… |
| 1.3.6.1.4.1.11.2.14.2.8.3 | hubPrimaryPort | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* The port number of the primary link. It can only be set to zero if the hubBackupPort… |
| 1.3.6.1.4.1.11.2.14.2.8.4 | hubBackupAddress | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* The MAC address of the device at the other end of the primary link which will respond… |
| 1.3.6.1.4.1.11.2.14.2.8.5 | hubBackupTestTime | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* The frequency, in time ticks, between sending the periodic test packets. The actual … |
| 1.3.6.1.4.1.11.2.14.2.8.6 | hubBackupConsecutiveFails | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* The number of test packet failures which will cause the hub to switch to the backup l… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.2.1 | hubThinlanFault | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* When set to 'true' this object causes the Fault LED to blink if the ThinLan Port is s… |
| 1.3.6.1.4.1.11.2.14.2.2 | hubGlobal | 11 | 11 | None |
| 1.3.6.1.4.1.11.2.14.2.3 | hubPortTable | 10 | 10 | ********* THIS OBJECT IS OBSOLETE ********* A list of hubPort entries. |
| 1.3.6.1.4.1.11.2.14.2.4 | hubBitmaps | 1 | 1 | None |
| 1.3.6.1.4.1.11.2.14.2.5 | hubAddressTableMaxAge | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* The hubAddressTableMaxAge is the time beyond which an inactive MAC address will be re… |
| 1.3.6.1.4.1.11.2.14.2.6 | hubAddressTable | 2 | 2 | ********* THIS OBJECT IS OBSOLETE ********* A list of entries present in the hub address table. |
| 1.3.6.1.4.1.11.2.14.2.7 | hubNumBkpLinks | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* The number of backup links configurable on this hub. |
| 1.3.6.1.4.1.11.2.14.2.9 | hubSqeEnabled | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* When 'true', this flag indicates that SQE has been detected for the last ten agent tr… |
| 1.3.6.1.4.1.11.2.14.2.10 | hubSecurity | 5 | 38 | None |
| 1.3.6.1.4.1.11.2.14.2.11 | hubAddressMoveLogTable | 1 | 7 | ********* THIS OBJECT IS OBSOLETE ********* A log of the 20 most recent times that the agent detected that a source MAC address w… |
| 1.3.6.1.4.1.11.2.14.2.12 | hubLateEventMonitor | 0 | 0 | ********* THIS OBJECT IS OBSOLETE ********* This object configures the late event monitoring functionality for the hub. This mod… |