Vendor: Hewlett-Packard
Module: HP-SN-AGENT-MIB
[Automatically extracted from oidview.com]
snAgentGbl OBJECT IDENTIFIER ::= { snAgentSys 1 }
snAgentGbl OBJECT IDENTIFIER ::= { snAgentSys 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.1 | snAgReload | 0 | 0 | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2).… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.2 | snAgEraseNVRAM | 0 | 0 | Action object to erase NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation failed or bad fl… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.3 | snAgWriteNVRAM | 0 | 0 | Action object to save all configuration info to NVRAM of the agent. The following values can only be read: normal(1) error(2)... op… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.4 | snAgConfigFromNVRAM | 0 | 0 | Action object to config the switch from NVRAM of the agent. The following values can only be read: normal(1) error(2)... operation… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.5 | snAgTftpServerIp | 0 | 0 | The tftp server address, this will be used for both download/upload image file and config file. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.6 | snAgImgFname | 0 | 0 | Name of the image file including path currently associated with the system. When the object is not used, the value is a zero leng… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.7 | snAgImgLoad | 0 | 0 | Action object to down/up load a new image to the agent. The following values: Error values: from normal(1) to operationError(17) … |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.8 | snAgCfgFname | 0 | 0 | Name of the config file(s) including path currently associated with the system. Some agents in special situations may support a v… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.9 | snAgCfgLoad | 0 | 0 | Action object to down/up load a config image to the agent. The following values can be read : Error values: from normal(1) to oper… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.10 | snAgDefGwayIp | 0 | 0 | The default gateway (router) address. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.11 | snAgImgVer | 0 | 0 | The version of the running software in the form 'major.minor.maintenance[letters]'. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.12 | snAgFlashImgVer | 0 | 0 | The version of the software image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If … |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.13 | snAgGblIfIpAddr | 0 | 0 | The interface ip address. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.14 | snAgGblIfIpMask | 0 | 0 | The interface ip address mask. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.15 | snAgGblPassword | 0 | 0 | System Security Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero str… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.16 | snAgTrpRcvrCurEntry | 0 | 0 | The current total entries of the Trap Receiver Table are created. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.19 | snAgGblDataRetrieveMode | 0 | 0 | By default, this mode is set to nextbootCfg(0). The VLAN Table and Port-STP Table data will be retrieved according to this mode. n… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.20 | snAgSystemLog | 0 | 0 | The system log object to indicate whether any Network Management Station(NMS) has login. The first byte of the octet string is t… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.21 | snAgGblEnableColdStartTrap | 0 | 0 | Indicates whether the SNMP agent process is permitted to generate cold start traps. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.22 | snAgGblEnableLinkUpTrap | 0 | 0 | Indicates whether the SNMP agent process is permitted to generate link up traps. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.23 | snAgGblEnableLinkDownTrap | 0 | 0 | Indicates whether the SNMP agent process is permitted to generate link down traps. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.24 | snAgGblPasswordChangeMode | 0 | 0 | Specify which management entity is allowed to change the password. 'anyMgmtEntity' management entities are SNMP management statio… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.25 | snAgGblReadOnlyCommunity | 0 | 0 | SNMP read community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero length s… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.26 | snAgGblReadWriteCommunity | 0 | 0 | SNMP read-write community string and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero le… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.27 | snAgGblCurrentSecurityLevel | 0 | 0 | This represnts the current log-in security level. Each level of security requires a password to permit user for different system … |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.28 | snAgGblSecurityLevelSet | 0 | 0 | This shows which the security level password to be set. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.29 | snAgGblLevelPasswordsMask | 0 | 0 | This shows the bitmap of level passwords which successfully assigned to the system. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.30 | snAgGblQueueOverflow | 0 | 0 | false - The device queues are not overflow. true - The device queues are overflow. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.31 | snAgGblBufferShortage | 0 | 0 | false - The device buffers are adequate. true - The device buffers are in shortage. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.32 | snAgGblDmaFailure | 0 | 0 | false - The device DMAs are in good condition. true - One of the DMAs in the device fails. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.33 | snAgGblResourceLowWarning | 0 | 0 | false - No, the device does not have resource-low-warning. true - Yes, the device does have resource-low-warning. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.34 | snAgGblExcessiveErrorWarning | 0 | 0 | false - No, the device does not have any excessive collision, FCS errors, alignment warning etc. true - Yes, the device does ha… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.35 | snAgGblCpuUtilData | 0 | 0 | The statistics collection of utilization of the CPU in the device. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.36 | snAgGblCpuUtilCollect | 0 | 0 | enable(1) - The beginning of statistics collection of utilization of the CPU in the device. disable(0) - The end of statistics … |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.37 | snAgGblTelnetTimeout | 0 | 0 | Telnet session idling timeout value. Writing value 0 to this object never timeouts any telnet sessions. Each value unit is one mi… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.38 | snAgGblEnableWebMgmt | 0 | 0 | Enable/disable web management. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.39 | snAgGblSecurityLevelBinding | 0 | 0 | This represnts the binding of a given password to which security level. A value of 255 indicates an invalid binding. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.40 | snAgGblEnableSLB | 0 | 0 | Enable/disable Server Load Balancing. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.41 | snAgSoftwareFeature | 0 | 0 | A bit string representing the software feature of the running switch/router image. These features were conditional compiled to di… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.42 | snAgGblEnableModuleInsertedTrap | 0 | 0 | Indicates whether the SNMP agent process is permitted to generate hardware module inserted to chassis traps. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.43 | snAgGblEnableModuleRemovedTrap | 0 | 0 | Indicates whether the SNMP agent process is permitted to generate hardware module removed from chassis traps. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.44 | snAgGblTrapMessage | 0 | 0 | A generic trap message string. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.45 | snAgGblEnableTelnetServer | 0 | 0 | Enable or disable telnet server in device. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.46 | snAgGblTelnetPassword | 0 | 0 | Telnet Access Password and this is only allowed to use for setting but not for reading. An SNMP-Get will get an zero string. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.47 | snAgBuildDate | 0 | 0 | The date of the built software. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.48 | snAgBuildtime | 0 | 0 | The time of the built software. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.49 | snAgBuildVer | 0 | 0 | The version of the built software in the form 'major.minor.maintenance[letters]'. |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.50 | snAgGblCpuUtil1SecAvg | 0 | 0 | snAgGblCpuUtil1SecAvg OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The statistics collection of 1 se… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.51 | snAgGblCpuUtil5SecAvg | 0 | 0 | snAgGblCpuUtil5SecAvg OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The statistics collection of 5 se… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.52 | snAgGblCpuUtil1MinAvg | 0 | 0 | snAgGblCpuUtil1MinAvg OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The statistics collection of 1 mi… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.53 | snAgGblDynMemUtil | 0 | 0 | snAgGblDynMemUtil OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The system dynamic memory utilization… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.54 | snAgGblDynMemTotal | 0 | 0 | snAgGblDynMemTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total amount of system dynamic… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.55 | snAgGblDynMemFree | 0 | 0 | snAgGblDynMemFree OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The free amount of system dynamic m… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.56 | snAgImgLoadSPModuleType | 0 | 0 | snAgImgLoadSPModuleType OBJECT-TYPE SYNTAX INTEGER { other(1), vm1(2), pos12(3), pos48(4), atm(5), gignpa(6) } ACCESS read-writ… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.57 | snAgImgLoadSPModuleNumber | 0 | 0 | snAgImgLoadSPModuleNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The slot numner of a switc… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.58 | snAgTrapHoldTime | 0 | 0 | snAgTrapHoldTime OBJECT-TYPE SYNTAX INTEGER (1..600) ACCESS read-write STATUS mandatory DESCRIPTION "The time in seconds for wh… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.59 | snAgSFlowSourceInterface | 0 | 0 | snAgSFlowSourceInterface OBJECT-TYPE SYNTAX InterfaceIndex ACCESS read-write STATUS mandatory DESCRIPTION "Use the ifIndex valu… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.60 | snAgGblTelnetLoginTimeout | 0 | 0 | snAgGblTelnetLoginTimeout OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "Telnet session log… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.61 | snAgGblBannerExec | 0 | 0 | snAgGblBannerExec OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "EXEC process creation banner… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.62 | snAgGblBannerIncoming | 0 | 0 | snAgGblBannerIncoming OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Incoming terminal line b… |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.1.63 | snAgGblBannerMotd | 0 | 0 | snAgGblBannerMotd OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Message-of-the-day banner. I… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.7.11.12.1.2.2 | snAgentBrd | 1 | 25 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.3 | snAgentTrp | 1 | 7 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.4 | snAgentBoot | 1 | 7 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.5 | snAgCfgEos | 1 | 5 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.6 | snAgentLog | 4 | 30 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.7 | snAgentSysParaConfig | 1 | 8 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.8 | snAgentConfigModule | 1 | 11 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.9 | snAgentUser | 2 | 9 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.10 | snAgentRedundant | 1 | 7 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.11 | snAgentCpu | 1 | 6 | None |
1.3.6.1.4.1.11.2.3.7.11.12.1.2.12 | snAgentHw | 1 | 10 | None |