Apply the IPX SAP Global filter list snIpxSapGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all SAP filter lists to/from all ports.
Prior to sending this command, snIpxSapGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is valid
Parsed from file hp-sn-ipx.mib.txt
Company: None
Module: HP-SN-IPX-MIB
Apply the IPX SAP Global filter list snIpxSapGblFiltList to
all interfaces. This object is used to add all RIP filter
lists and delete all SAP filter lists to/from all ports.
Prior to sending this command, snIpxSapGblFiltList must be ready.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation is failed, then a SET with
value of (2)or(3) returns error 'GenError'.
Deleted(2)&(3) go away immediately.
The following values can be returned on reads:
noSuch(0)...no such operation yet.
valid(1)....set operation is done and is valid
Parsed from file HP-SN-IPX-MIB.mib
Module: HP-SN-IPX-MIB
Vendor: Hewlett-Packard
Module: HP-SN-IPX-MIB
[Automatically extracted from oidview.com]
snIpxSapFiltOnAllPort OBJECT-TYPE SYNTAX INTEGER { valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Apply the IPX SAP Global filter list snIpxSapGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all SAP filter lists to/from all ports. Prior to sending this command, snIpxSapGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid" ::= { snIpxGen 14 }
snIpxSapFiltOnAllPort OBJECT-TYPE SYNTAX INTEGER { valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Apply the IPX SAP Global filter list snIpxSapGblFiltList to all interfaces. This object is used to add all RIP filter lists and delete all SAP filter lists to/from all ports. Prior to sending this command, snIpxSapGblFiltList must be ready. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation is failed, then a SET with value of (2)or(3) returns error 'GenError'. Deleted(2)&(3) go away immediately. The following values can be returned on reads: noSuch(0)...no such operation yet. valid(1)....set operation is done and is valid" ::= { snIpxGen 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.1 | snIpxRoutingMode | 0 | 0 | Enabled/Disabled System IPX Routing Mode status. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.2 | snIpxNetBiosFilterMode | 0 | 0 | Enabled/Disabled NetBios Filter Mode status. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.3 | snIpxClearCache | 0 | 0 | clear(1) will clear cache table. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.4 | snIpxClearRoute | 0 | 0 | clear(1) will clear ipx route table. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.5 | snIpxClearTrafficCnts | 0 | 0 | clear(1) will clear ipx all traffic counters. - snIpxRcvPktsCnt, snIpxFwdPktsCnt, snIpxRcvDropPktsCnt, snIpxTxDropPktsCnt, snIpxRc… |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.6 | snIpxRcvPktsCnt | 0 | 0 | IPX incoming packets counter. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.7 | snIpxTxPktsCnt | 0 | 0 | IPX Outgoing packets counter. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.8 | snIpxFwdPktsCnt | 0 | 0 | IPX forwarding packets counter. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.9 | snIpxRcvDropPktsCnt | 0 | 0 | IPX receiving drop packets counter. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.10 | snIpxRcvFiltPktsCnt | 0 | 0 | IPX receiving filter packets counter. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.11 | snIpxRipGblFiltList | 0 | 0 | An IPX RIP Global Filter List. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.12 | snIpxRipFiltOnAllPort | 0 | 0 | Apply the IPX RIP Global filter list snIpxRipGblFiltList to all interfaces. This object is used to add all RIP filter lists and d… |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.13 | snIpxSapGblFiltList | 0 | 0 | An IPX SAP Global Filter List. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.15 | snIpxTxDropPktsCnt | 0 | 0 | IPX transmitting drop packets counter. |
1.3.6.1.4.1.11.2.3.7.11.12.2.1.1.16 | snIpxTxFiltPktsCnt | 0 | 0 | IPX transmitting filter packets counter. |