To enable/disable an action of immediately reset the BGP sessions of any
directly adjacent external neighbors if the link used to reach them goes
down.
Parsed from file hp-sn-bgp4.mib.txt
Company: None
Module: HP-SN-BGP4-GROUP-MIB
To enable/disable an action of immediately reset the BGP sessions of any
directly adjacent external neighbors if the link used to reach them goes
down.
Parsed from file HP-SN-BGP4-GROUP-MIB.mib
Module: HP-SN-BGP4-GROUP-MIB
Vendor: Hewlett-Packard
Module: HP-SN-BGP4-GROUP-MIB
[Automatically extracted from oidview.com]
snBgp4GenFastExternalFallover OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down." ::= { snBgp4Gen 5 }
snBgp4GenFastExternalFallover OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down." ::= { snBgp4Gen 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.1 | snBgp4GenAlwaysCompareMed | 0 | 0 | To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.2 | snBgp4GenAutoSummary | 0 | 0 | To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.3 | snBgp4GenDefaultLocalPreference | 0 | 0 | To set the default local preference attribute. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.4 | snBgp4GenDefaultInfoOriginate | 0 | 0 | To enable/disable the default Information Originate. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.6 | snBgp4GenNextBootNeighbors | 0 | 0 | The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The max… |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.7 | snBgp4GenNextBootRoutes | 0 | 0 | The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is … |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.8 | snBgp4GenSynchronization | 0 | 0 | To enable/disable the synchronization between BGP and your IGP. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.9 | snBgp4GenKeepAliveTime | 0 | 0 | The Keep alive timer. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.10 | snBgp4GenHoldTime | 0 | 0 | The Hold time timer. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.11 | snBgp4GenRouterId | 0 | 0 | BGP Router Id. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.12 | snBgp4GenTableMap | 0 | 0 | An octet string of the route-map name, each character of the name is represented by one octet. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.13 | snBgp4GenAdminStat | 0 | 0 | The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'di… |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.14 | snBgp4GenDefaultMetric | 0 | 0 | To set default metric values for the BGP4 protocol. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.15 | snBgp4GenMaxNeighbors | 0 | 0 | The maximum number of neighbors can be configured in a BGP Peer Group. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.16 | snBgp4GenMinNeighbors | 0 | 0 | The minimum number of neighbors can be configured in a BGP Peer Group. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.17 | snBgp4GenMaxRoutes | 0 | 0 | The maximum configured number of Routes. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.18 | snBgp4GenMinRoutes | 0 | 0 | The minimum configured number of Routes. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.19 | snBgp4GenMaxAddrFilters | 0 | 0 | The maximum configured number of BGP4 address filters. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.20 | snBgp4GenMaxAggregateAddresses | 0 | 0 | The maximum configured number of BGP4 aggregate addresses. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.21 | snBgp4GenMaxAsPathFilters | 0 | 0 | The maximum configured number of BGP4 AS-PATH filters. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.22 | snBgp4GenMaxCommunityFilters | 0 | 0 | The maximum configured number of BGP4 Community filters. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.23 | snBgp4GenMaxNetworks | 0 | 0 | The maximum configured number of BGP4 Networks. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.24 | snBgp4GenMaxRouteMapFilters | 0 | 0 | The maximum configured number of BGP4 Route-map Filters. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.25 | snBgp4GenNeighPrefixMinValue | 0 | 0 | The minimum configured value of BGP4 Neighbor Prefix. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.26 | snBgp4GenOperNeighbors | 0 | 0 | The current operational max number of neighbors configured for a BGP Group. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.27 | snBgp4GenOperRoutes | 0 | 0 | The current operational number of Routes. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.28 | snBgp4GenLocalAs | 0 | 0 | Bgp4 local autonomous system number. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.29 | snBgp4GenRoutesInstalled | 0 | 0 | Bgp4 installed routes. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.30 | snBgp4GenAsPathInstalled | 0 | 0 | Bgp4 installed autonomous system path. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.31 | snBgp4ExternalDistance | 0 | 0 | Administrative distance for BGP external routes. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.32 | snBgp4InternalDistance | 0 | 0 | Administrative distance for BGP internal routes. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.33 | snBgp4LocalDistance | 0 | 0 | Administrative distance for BGP local routes. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.34 | snBgp4OperNumOfAttributes | 0 | 0 | The operational number of attribute entries. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.35 | snBgp4NextBootMaxAttributes | 0 | 0 | The next boot maximum attribute entries. 10000 means reset to default. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.36 | snBgp4ClusterId | 0 | 0 | A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.37 | snBgp4ClientToClientReflection | 0 | 0 | To enable/disable the client to client reflection in BGP4. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.38 | snBgp4GenTotalNeighbors | 0 | 0 | The current total number of neighbors running in a BGP Group. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.39 | snBgp4GenMaxPaths | 0 | 0 | The maximum configured number of Paths. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.40 | snBgp4GenConfedId | 0 | 0 | Bgp4 Confederation Id. |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.41 | snBgp4GenConfedPeers | 0 | 0 | An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented … |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.42 | snBgp4GenDampening | 0 | 0 | snBgp4GenDampening OBJECT-TYPE SYNTAX INTEGER { none (0), parameters (1), routeMap (2) } ACCESS read-write STATUS mandatory DES… |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.43 | snBgp4GenDampenHalfLife | 0 | 0 | snBgp4GenDampenHalfLife OBJECT-TYPE SYNTAX INTEGER (1..45) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Dampening Half … |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.44 | snBgp4GenDampenReuse | 0 | 0 | snBgp4GenDampenReuse OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Dampening Reuse… |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.45 | snBgp4GenDampenSuppress | 0 | 0 | snBgp4GenDampenSuppress OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Dampening Su… |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.46 | snBgp4GenDampenMaxSuppress | 0 | 0 | snBgp4GenDampenMaxSuppress OBJECT-TYPE SYNTAX INTEGER (1..20000) ACCESS read-write STATUS mandatory DESCRIPTION "Bgp4 Dampening… |
1.3.6.1.4.1.11.2.3.7.11.12.2.11.1.47 | snBgp4GenDampenMap | 0 | 0 | snBgp4GenDampenMap OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An octet strin… |