This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. VirRtr this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Chassis/Stackable router VRRP Track port membership.
The size of the OCTET STRING for Chassis is 32.
The size of the OCTET STRING for Stackable is 4.
Parsed from file hp-sn-ip.mib.txt
Company: None
Module: HP-SN-IP-MIB
This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. VirRtr this object is configured
then the Preference Level of this interface will be adjusted
dynamically depending on the state of the Track Port.
The interface's Preference Level is reduced by value of
Preference Level parameter when the Track Port states first
changes from UP to DOWN. When the Track Port next comes up
the interface's Preference Level is increased by the amount
specified by the Preference Level.
The Chassis/Stackable router VRRP Track port membership.
The size of the OCTET STRING for Chassis is 32.
The size of the OCTET STRING for Stackable is 4.
Parsed from file HP-SN-IP-MIB.mib
Module: HP-SN-IP-MIB
Vendor: Hewlett-Packard
Module: HP-SN-IP-MIB
[Automatically extracted from oidview.com]
snVrrpVirRtrTrackPortMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4." ::= { snVrrpVirRtrEntry 13 }
snVrrpVirRtrTrackPortMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..32)) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4." ::= { snVrrpVirRtrEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.1 | snVrrpVirRtrPort | 0 | 0 | The IP port of this VRRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.2 | snVrrpVirRtrId | 0 | 0 | One of the virtual router ID of this VRRP interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.3 | snVrrpVirRtrOwnership | 0 | 0 | The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it me… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.4 | snVrrpVirRtrCfgPriority | 0 | 0 | The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.5 | snVrrpVirRtrTrackPriority | 0 | 0 | The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.6 | snVrrpVirRtrCurrPriority | 0 | 0 | The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.7 | snVrrpVirRtrHelloInt | 0 | 0 | Time interval between advertisements (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.8 | snVrrpVirRtrDeadInt | 0 | 0 | Dead interval (seconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.9 | snVrrpVirRtrPreemptMode | 0 | 0 | This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow pree… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.10 | snVrrpVirRtrState | 0 | 0 | This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.11 | snVrrpVirRtrActivate | 0 | 0 | This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate th… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.12 | snVrrpVirRtrIpAddrMask | 0 | 0 | The numbers of IP Addresses of this virtual router of this interface. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.14 | snVrrpVirRtrTrackVifMask | 0 | 0 | This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. De… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.15 | snVrrpVirRtrRowStatus | 0 | 0 | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.16 | snVrrpVirRtrRxArpPktDropCnts | 0 | 0 | The received VRRP ARP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.17 | snVrrpVirRtrRxIpPktDropCnts | 0 | 0 | The received VRRP IP Packet Drop Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.18 | snVrrpVirRtrRxPortMismatchCnts | 0 | 0 | The received VRRP Port mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.19 | snVrrpVirRtrRxNumOfIpMismatchCnts | 0 | 0 | The received VRRP Number of IP Addresses mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.20 | snVrrpVirRtrRxIpMismatchCnts | 0 | 0 | The received VRRP IP Address mismatching Counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.21 | snVrrpVirRtrRxHelloIntMismatchCnts | 0 | 0 | The counts of the virtual router interface with hello interval mismatch counts. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.22 | snVrrpVirRtrRxPriorityZeroFromMasterCnts | 0 | 0 | The counts of the virtual router interface with Priority zero from the master. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.23 | snVrrpVirRtrRxHigherPriorityCnts | 0 | 0 | The counts of the virtual router interface with higher Priority. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.24 | snVrrpVirRtrTransToMasterStateCnts | 0 | 0 | The counts of the virtual router interface transition to master state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.25 | snVrrpVirRtrTransToBackupStateCnts | 0 | 0 | The counts of the virtual router interface transition to backup state. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.26 | snVrrpVirRtrCurrDeadInt | 0 | 0 | Current Dead interval (in 100 milliseconds). |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.27 | snVrrpVirRtrTrackPortList | 0 | 0 | snVrrpVirRtrTrackPortList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS deprecated DESCRIPTION "This object specifie… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.12.3.1.1.28 | snVrrpVirRtrTrackVifPortList | 0 | 0 | snVrrpVirRtrTrackVifPortList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS deprecated DESCRIPTION "This object speci… |