Apply the ip rip global filter list snRtIpRipGblFiltList to
all interfaces. This object is used to add all rip filter
lists and delete all rip filter lists to/from all interfaces.
Prior to sending this command, snRtIpRipGblFiltList must have
been set to a proper filter list.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation failed, then a SET with value of (2) or (3)
returns error code 'GenError'. If succeed, entries in the
filter list are deleted immediately.
The following values can be returned on reads:
valid(1)....set operation is done and is valid.
Parsed from file hp-sn-ip.mib.txt
Company: None
Module: HP-SN-IP-MIB
Apply the ip rip global filter list snRtIpRipGblFiltList to
all interfaces. This object is used to add all rip filter
lists and delete all rip filter lists to/from all interfaces.
Prior to sending this command, snRtIpRipGblFiltList must have
been set to a proper filter list.
The values that can be written are:
deleteAllInBound(2)...delete all in-bound filter lists from all ports.
deleteAllOutBound(3)..delete all out-bound filter lists from all ports.
addAllInBound(4)......add all in-bound filter lists to all ports.
addAllOutBound(5).....add all out-bound filter lists to all ports.
If set operation failed, then a SET with value of (2) or (3)
returns error code 'GenError'. If succeed, entries in the
filter list are deleted immediately.
The following values can be returned on reads:
valid(1)....set operation is done and is valid.
Parsed from file HP-SN-IP-MIB.mib
Module: HP-SN-IP-MIB
Vendor: Hewlett-Packard
Module: HP-SN-IP-MIB
[Automatically extracted from oidview.com]
snRtIpRipFiltOnAllPort OBJECT-TYPE SYNTAX INTEGER { valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Apply the ip rip global filter list snRtIpRipGblFiltList to all interfaces. This object is used to add all rip filter lists and delete all rip filter lists to/from all interfaces. Prior to sending this command, snRtIpRipGblFiltList must have been set to a proper filter list. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation failed, then a SET with value of (2) or (3) returns error code 'GenError'. If succeed, entries in the filter list are deleted immediately. The following values can be returned on reads: valid(1)....set operation is done and is valid." ::= { snRtIpRipGeneral 7 }
snRtIpRipFiltOnAllPort OBJECT-TYPE SYNTAX INTEGER { valid(1), deleteAllInBound(2), deleteAllOutBound(3), addAllInBound(4), addAllOutBound(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Apply the ip rip global filter list snRtIpRipGblFiltList to all interfaces. This object is used to add all rip filter lists and delete all rip filter lists to/from all interfaces. Prior to sending this command, snRtIpRipGblFiltList must have been set to a proper filter list. The values that can be written are: deleteAllInBound(2)...delete all in-bound filter lists from all ports. deleteAllOutBound(3)..delete all out-bound filter lists from all ports. addAllInBound(4)......add all in-bound filter lists to all ports. addAllOutBound(5).....add all out-bound filter lists to all ports. If set operation failed, then a SET with value of (2) or (3) returns error code 'GenError'. If succeed, entries in the filter list are deleted immediately. The following values can be returned on reads: valid(1)....set operation is done and is valid." ::= { snRtIpRipGeneral 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.1 | snRtIpRipEnable | 0 | 0 | Enable/disable ip rip routing. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.2 | snRtIpRipUpdateTime | 0 | 0 | Ip rip update interval in seconds. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.3 | snRtIpRipRedisEnable | 0 | 0 | Enable/disable redistribution to rip. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.4 | snRtIpRipRedisDefMetric | 0 | 0 | Default metric to be used when redistribute route to rip. |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.5 | snRtIpRipSetAllPortConfig | 0 | 0 | The value of this object is an index number of a snRtIpRipPortConfigTable row (i.e. snRtIpRipPortConfigPortIndex), which is the s… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.6 | snRtIpRipGblFiltList | 0 | 0 | An ip rip global filter list, of which each octet contains a filter ID number that forms a group of filters. A valid entry in the… |
| 1.3.6.1.4.1.11.2.3.7.11.12.2.3.1.8 | snRtIpRipDistance | 0 | 0 | Administration distance. |