The total number of frames seen originating from the near end
of the link including errored frames.
Parsed from file agilent-wanstats.mib.txt
Company: None
Module: WANSTATS-MIB
The total number of frames seen originating from the near end
of the link including errored frames.
Parsed from file WANSTATS-MIB.mib
Module: WANSTATS-MIB
Vendor: Hewlett-Packard
Module: WANSTATS-MIB
[Automatically extracted from oidview.com]
wanT1E1StatsOutFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames seen originating from the near end of the link including errored frames." ::= { wanT1E1StatsEntry 5 }
wanT1E1StatsOutFrames OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames seen originating from the near end of the link including errored frames." ::= { wanT1E1StatsEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.1 | wanT1E1StatsIndex | 0 | 0 | The value of this object uniquely identifies this wanT1E1StatsTable entry. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.2 | wanT1E1StatsDataSource | 0 | 0 | This object identifies the source of the data that this wanT1E1StatsEntry analyzes. This source can be any DS1 or E1 interface o… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.3 | wanT1E1StatsDropEvents | 0 | 0 | The total number of events in which frames were dropped by the probe due to lack of resources. Note that this number is not nece… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.4 | wanT1E1StatsInFrames | 0 | 0 | The total number of frames seen originating from the far end of the link including errored frames. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.6 | wanT1E1StatsInOctets | 0 | 0 | The sum of octets from all frames seen originating from the far end of the link including errored frames. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.7 | wanT1E1StatsOutOctets | 0 | 0 | The sum of octets from all frames seen originating from the near end of the link including errored frames. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.8 | wanT1E1StatsESs | 0 | 0 | For ESF and E1-CRC links an Errored Second is a second with one or more Path Code Violations OR one or more Out of Frame defects … |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.9 | wanT1E1StatsSESs | 0 | 0 | A Severely Errored Second for ESF signals is a second with 320 or more Path Code Violation Error Events OR one or more Out of Fra… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.10 | wanT1E1StatsSEFSs | 0 | 0 | An Severely Errored Framing Second is a second with one or more Out of Frame defects OR a detected AIS defect. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.11 | wanT1E1StatsOOFs | 0 | 0 | An OOF defect is the occurrence of a particular density of Framing Error events. For T1 links, an Out of Frame defect is declared… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.12 | wanT1E1StatsUASs | 0 | 0 | Unavailable Seconds (UAS) are calculated by counting the number of seconds that the interface is unavailable. The DS1 interface … |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.13 | wanT1E1StatsCSSs | 0 | 0 | A Controlled Slip Second is a one-second interval containing one or more controlled slips. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.14 | wanT1E1StatsPCVs | 0 | 0 | A Path Coding Violation error event is a frame synchronization bit error in the D4 and E1-noCRC formats, or a CRC error in the ES… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.15 | wanT1E1StatsLESs | 0 | 0 | A Line Errored Second, according to T1M1.3, is a second in which one or more Line Code Violation error events were detected. While… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.16 | wanT1E1StatsBESs | 0 | 0 | A Bursty Errored Second (also known as Errored Second type B) is a second with fewer than 320 and more than 1 Path Coding Violati… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.17 | wanT1E1StatsDMs | 0 | 0 | A Degraded Minute is one in which the estimated error rate exceeds 1E-6 but does not exceed 1E-3 (see G.821 [15]). Degraded Minute… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.18 | wanT1E1StatsLCVs | 0 | 0 | A Line Coding Violation (LCV) is the occurrence of either a Bipolar Violation (BPV) or Excessive Zeroes (EXZ) Error Event. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.19 | wanT1E1StatsLOFs | 0 | 0 | For T1 links, the Loss Of Frame failure is declared when an OOF or LOS defect has persisted for T seconds, where 2 <= T <= 10. The Loss Of Frame failure is cleared when there have be… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.20 | wanT1E1StatsLOSs | 0 | 0 | For T1, the Loss Of Signal failure is declared upon observing 175 +/- 75 contiguous pulse positions with no pulses of either posi… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.21 | wanT1E1StatsRAIs | 0 | 0 | The Far End Alarm failure is also known as 'Yellow Alarm' in the T1 case and 'Distant Alarm' in the E1 case. For D4 links, the Fa… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.22 | wanT1E1StatsAISs | 0 | 0 | The Alarm Indication Signal failure is declared when an AIS defect is detected at the input and the AIS defect still exists afte… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.23 | wanT1E1StatsTS16AISs | 0 | 0 | For E1 links, the TS16 Alarm Indication Signal failure is declared when time-slot 16 is received as all ones for all frames of tw… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.24 | wanT1E1StatsLOMFs | 0 | 0 | The Loss Of MultiFrame failure is declared when two consecutive multiframe alignment signals (bits 4 through 7 of TS16 of frame 0… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.25 | wanT1E1StatsFarLOMFs | 0 | 0 | The Far End Loss Of Multiframe failure is declared when bit 2 of TS16 of frame 0 is received set to one on two consecutive occasi… |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.26 | wanT1E1StatsOwner | 0 | 0 | The entity that configured this entry. |
| 1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.1.1.1.1.27 | wanT1E1StatsStatus | 0 | 0 | The status of this wanT1E1StatsTable entry. |