The value of sysUpTime at the start of the interval over
which this sample was measured. If the probe keeps track
of time of day, it should start the first sample of the
history at a time such that when the next hour of the day
begins, a sample is started at that instant. Note that
following this rule may require the probe to delay collection
the first sample of the history, as each sample must be of the
same interval. Also note that the sample which is currently
being collected is not accessible in this table until the end
of its interval.
Parsed from file agilent-wanstats.mib.txt
Company: None
Module: WANSTATS-MIB
The value of sysUpTime at the start of the interval over
which this sample was measured. If the probe keeps track
of time of day, it should start the first sample of the
history at a time such that when the next hour of the day
begins, a sample is started at that instant. Note that
following this rule may require the probe to delay collection
the first sample of the history, as each sample must be of the
same interval. Also note that the sample which is currently
being collected is not accessible in this table until the end
of its interval.
Parsed from file WANSTATS-MIB.mib
Module: WANSTATS-MIB
Vendor: Hewlett-Packard
Module: WANSTATS-MIB
[Automatically extracted from oidview.com]
wanFrPvcHistoryIntervalStart OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collection the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval." ::= { wanFrPvcHistoryEntry 3 }
wanFrPvcHistoryIntervalStart OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collection the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval." ::= { wanFrPvcHistoryEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.1 | wanFrPvcHistoryIndex | 0 | 0 | The history of which this entry is a port. The history identified by a particular value of this index is the same history as ide… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.2 | wanFrPvcHistorySampleIndex | 0 | 0 | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyC… |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.4 | wanFrPvcHistoryDropEvents | 0 | 0 | The change in value of wanFrPvcStatsDropEvents during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.5 | wanFrPvcHistoryInFrames | 0 | 0 | The change in value of wanFrPvcStatsInFrames during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.6 | wanFrPvcHistoryOutFrames | 0 | 0 | The change in value of wanFrPvcStatsOutFrames during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.7 | wanFrPvcHistoryInOctets | 0 | 0 | The change in value of wanFrPvcStatsInOctets during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.8 | wanFrPvcHistoryOutOctets | 0 | 0 | The change in value of wanFrPvcStatsOutOctets during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.9 | wanFrPvcHistoryInFECNs | 0 | 0 | The change in value of wanFrPvcStatsInFECNs during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.10 | wanFrPvcHistoryOutFECNs | 0 | 0 | The change in value of wanFrPvcStatsOutFECNs during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.11 | wanFrPvcHistoryInBECNs | 0 | 0 | The change in value of wanFrPvcStatsInBECNs during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.12 | wanFrPvcHistoryOutBECNs | 0 | 0 | The change in value of wanFrPvcStatsOutBECNs during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.13 | wanFrPvcHistoryInDEs | 0 | 0 | The change in value of wanFrPvcStatsInDEs during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.14 | wanFrPvcHistoryOutDEs | 0 | 0 | The change in value of wanFrPvcStatsOutDEs during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.15 | wanFrPvcHistoryUpTime | 0 | 0 | The change in value of wanFrPvcStatsUpTime during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.16 | wanFrPvcHistoryDownTime | 0 | 0 | The change in value of wanFrPvcStatsDownTime during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.17 | wanFrPvcHistoryStateChanges | 0 | 0 | The change in value of wanFrPvcStatsStateChanges during the interval. |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.18 | wanFrPvcHistoryInUtilization | 0 | 0 | The best estimated of the mean utilization of traffic on this DLCI coming from the far end of the link in hundreds of percent of … |
1.3.6.1.4.1.11.2.3.7.6.1.5.1.8.2.3.2.1.19 | wanFrPvcHistoryOutUtilization | 0 | 0 | The best estimated of the mean utilization of traffic on this DLCI coming from the near end of the link in hundreds of percent of… |