The status of the PeriodicTable.
Only those communities with level4 access shall have access to this
object.
When the agent sets the status of a row in the echoTestPeriodicTable
to underCreation, it must set this object to beingModified(4). This
object must be reset to valid(1) after the row leaves the
underCreation state (either by being set to valid or invalid). The
agent should not allow the management station to modify this object
when it's value is beingModified(4).
The status for any row should be ignored by a manager that has
successfully placed the table underRecovery(3). Managers trying to
operate on row status during the recovery operation should fail.
Management stations which start walking the table after ensuring
the table status is valid should ensure the table has remained
unchanged during the walk by checking the PeriodicTableLastEdit.
A management station cannot set the state to underRecovery(3). To
initiate a recovery operation, the management station must set this
object to recoveryRequest(2). The agent must clear the table
entries when setting this object to recoveryRequest. If successful,
the management station may download the echo test table. If
unsuccessful, then the contents of the PeriodicTable cannot be
guaranteed.
The table shall exist in the underRecovery state until the management
station has finished downloading the table and sets this object back
to valid(1). If the agent determines the table has been in the
underRecovery(3) state for an abornmally long time, it may decide that
the management station has crashed. The agent then can set the clear
the table and set this object to valid(1).
Parsed from file lanprobe.txt
Company: None
Module: PROBE-MIB
The status of the PeriodicTable.
Only those communities with level4 access shall have access to this
object.
When the agent sets the status of a row in the echoTestPeriodicTable
to underCreation, it must set this object to beingModified(4). This
object must be reset to valid(1) after the row leaves the
underCreation state (either by being set to valid or invalid). The
agent should not allow the management station to modify this object
when it's value is beingModified(4).
The status for any row should be ignored by a manager that has
successfully placed the table underRecovery(3). Managers trying to
operate on row status during the recovery operation should fail.
Management stations which start walking the table after ensuring
the table status is valid should ensure the table has remained
unchanged during the walk by checking the PeriodicTableLastEdit.
A management station cannot set the state to underRecovery(3). To
initiate a recovery operation, the management station must set this
object to recoveryRequest(2). The agent must clear the table
entries when setting this object to recoveryRequest. If successful,
the management station may download the echo test table. If
unsuccessful, then the contents of the PeriodicTable cannot be
guaranteed.
The table shall exist in the underRecovery state until the management
station has finished downloading the table and sets this object back
to valid(1). If the agent determines the table has been in the
underRecovery(3) state for an abornmally long time, it may decide that
the management station has crashed. The agent then can set the clear
the table and set this object to valid(1).
Parsed from file PROBE-MIB.mib
Module: PROBE-MIB
Vendor: Hewlett-Packard
Module: PROBE-MIB
[Automatically extracted from oidview.com]
echoTestPeriodicTableStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), recoveryRequest(2), underRecovery(3), beingModified(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the PeriodicTable. Only those communities with level4 access shall have access to this object. When the agent sets the status of a row in the echoTestPeriodicTable to underCreation, it must set this object to beingModified(4). This object must be reset to valid(1) after the row leaves the underCreation state (either by being set to valid or invalid). The agent should not allow the management station to modify this object when it's value is beingModified(4). The status for any row should be ignored by a manager that has successfully placed the table underRecovery(3). Managers trying to operate on row status during the recovery operation should fail. Management stations which start walking the table after ensuring the table status is valid should ensure the table has remained unchanged during the walk by checking the PeriodicTableLastEdit. A management station cannot set the state to underRecovery(3). To initiate a recovery operation, the management station must set this object to recoveryRequest(2). The agent must clear the table entries when setting this object to recoveryRequest. If successful, the management station may download the echo test table. If unsuccessful, then the contents of the PeriodicTable cannot be guaranteed. The table shall exist in the underRecovery state until the management station has finished downloading the table and sets this object back to valid(1). If the agent determines the table has been in the underRecovery(3) state for an abornmally long time, it may decide that the management station has crashed. The agent then can set the clear the table and set this object to valid(1)." ::= { echoTest 8 }
echoTestPeriodicTableStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), recoveryRequest(2), underRecovery(3), beingModified(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the PeriodicTable. Only those communities with level4 access shall have access to this object. When the agent sets the status of a row in the echoTestPeriodicTable to underCreation, it must set this object to beingModified(4). This object must be reset to valid(1) after the row leaves the underCreation state (either by being set to valid or invalid). The agent should not allow the management station to modify this object when it's value is beingModified(4). The status for any row should be ignored by a manager that has successfully placed the table underRecovery(3). Managers trying to operate on row status during the recovery operation should fail. Management stations which start walking the table after ensuring the table status is valid should ensure the table has remained unchanged during the walk by checking the PeriodicTableLastEdit. A management station cannot set the state to underRecovery(3). To initiate a recovery operation, the management station must set this object to recoveryRequest(2). The agent must clear the table entries when setting this object to recoveryRequest. If successful, the management station may download the echo test table. If unsuccessful, then the contents of the PeriodicTable cannot be guaranteed. The table shall exist in the underRecovery state until the management station has finished downloading the table and sets this object back to valid(1). If the agent determines the table has been in the underRecovery(3) state for an abornmally long time, it may decide that the management station has crashed. The agent then can set the clear the table and set this object to valid(1)." ::= { echoTest 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.7.6.1.6.1 | echoTestSSTable | 1 | 13 | A table of instructions for and results of one-shot network connectivity tests |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.2 | echoTestPeriodicTable | 1 | 27 | A table of instructions for and results of periodic network connectivity tests |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.3 | echoTestPeriod | 0 | 0 | This object indicates how long to wait (in seconds) after completion of a pass through the echoTestPeriodic table before starting… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.4 | echoTestPeriodicCount | 0 | 0 | This object indicates how many complete passes through the echoTestPeriodicTable have occurred since it was last restarted. Its … |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.5 | echoTestResetSSTable | 0 | 0 | This is a control/status object for the echoTestSSTable. When there are entries in the table, this object's value is table-in-us… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.6 | echoTestResetPeriodicTable | 0 | 0 | This is a control/status object for the echoTestListTable. When there are entries in the table, this object's value is table_in_u… |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.7 | echoTestPeriodicTableLastEdit | 0 | 0 | The value of sysUpTime at the time of the last edit (create, delete, or modify) to the echoTestPeriodicTable |
| 1.3.6.1.4.1.11.2.3.7.6.1.6.9 | echoTestNovellDefaultGateway | 0 | 0 | The MAC level address of the router through which Novell Echo packets are to be forwarded, if the echo test is to be performed ou… |