Identifies the serial number for the device. If the
SERIAL-NUMBER object is set by the user, then setting
the object does not need to be protected. If the
SERIAL-NUMBER object is set at the factory, then the
SERVICE-PASSWORD object must be set correctly before the
SERIAL-NUMBER object is writable. If this is a writable
object, the POS should indicate the maximum supported
string length. If possible, encode the serial number in
a symbol set (like Roman-8) that matches the ASCII
character set and limit the characters used to ASCII
characters.
Additional information:
This value IS AFFECTED BY NVRAM RESETS, it
is set to the default value of XXXXXXXXXX when an NVRAM
init is done.
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
Identifies the serial number for the device. If the
SERIAL-NUMBER object is set by the user, then setting
the object does not need to be protected. If the
SERIAL-NUMBER object is set at the factory, then the
SERVICE-PASSWORD object must be set correctly before the
SERIAL-NUMBER object is writable. If this is a writable
object, the POS should indicate the maximum supported
string length. If possible, encode the serial number in
a symbol set (like Roman-8) that matches the ASCII
character set and limit the characters used to ASCII
characters.
Additional information:
The format of the LaserJet 5Si serial number is:
aaxxyynnnn
where: aa=A-Z, xx=A..Z & 0..9, yy=0..9 & A..Z, nn=0..9
This object is read-only so the SERVICE-PASSWORD object is not used.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
serial-number OBJECT-TYPE SYNTAX DisplayString (SIZE(0..10)) ACCESS read-only STATUS optional DESCRIPTION "Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERIAL-NUMBER object is set at the factory, then the SERVICE-PASSWORD object must be set correctly before the SERIAL-NUMBER object is writable. If this is a writable object, the POS should indicate the maximum supported string length. If possible, encode the serial number in a symbol set (like Roman-8) that matches the ASCII character set and limit the characters used to ASCII characters. Additional information: This value IS AFFECTED BY NVRAM RESETS, it is set to the default value of XXXXXXXXXX when an NVRAM init is done." ::= { id 3 }
serial-number OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS optional DESCRIPTION "Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERIAL-NUMBER object is set at the factory, then the SERVICE-PASSWORD object must be set correctly before the SERIAL-NUMBER object is writable. If this is a writable object, the POS should indicate the maximum supported string length. If possible, encode the serial number in a symbol set (like Roman-8) that matches the ASCII character set and limit the characters used to ASCII characters. Additional information: The format of the LaserJet 5Si serial number is: aaxxyynnnn where: aa=A-Z, xx=A..Z & 0..9, yy=0..9 & A..Z, nn=0..9 This object is read-only so the SERVICE-PASSWORD object is not used." ::= { id 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.1 | model-number | 0 | 0 | Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as spe… |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2 | model-name | 0 | 0 | Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing sh… |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.5 | fw-rom-datecode | 0 | 0 | Identifies the base system firmware date code. The date code will be encoded in the yyyymmdd format. There may be several versi… |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.6 | fw-rom-revision | 0 | 0 | This identifies the system code firmware ROM revision code. The format for a revision is major_revision.minor_revision. There m… |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.8 | fax-local-phone-num | 0 | 0 | CCITT sender's station id (ex. 08-396-4122). |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.9 | fax-station-name | 0 | 0 | name for the fax device (ex. HP R&D). |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10 | device-name | 0 | 0 | User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, … |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.11 | device-location | 0 | 0 | User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too lo… |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12 | asset-number | 0 | 0 | User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long,… |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.13 | system-contact | 0 | 0 | User defined string containing the name of the person or group that is responsible for the device. The POS should indicate the m… |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.18 | fax-line-interface-unit-id | 0 | 0 | The fax device line interface unit (LIU) identifier. The LIU number identifies the telephone system electrical characteristics su… |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.20 | formatter-serial-number | 0 | 0 | This object returns the formatter serial number for the device.The value returned from this object is the FORMATTERNUMBER devic… |
1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.24 | device-uuid | 0 | 0 | This object returns a string representation of the uniqueidentifier for the device. It returns a NULL string if unableto return… |