Writing this object allows a device self test to be
started. Reading this object provides an indication
what self-test is currently executing, if any. Actual
self-test operation is device specific. A self test may
not be allowed at any arbitrary time. If the device
supports the requested self test, but can not start the
execution of the self test when requested, the device
will respond with
a non-destructive self test is being started, the device
will generate a response before the self test is
completed.
RECOMMENDATION: If the device is ready (i.e. the NOT-
READY-PRINTER object does not contain any items, except
maybe being off-line) and is idle (i.e. the NOT-IDLE
object does not contain any items), this request should
always succeed. This provides a mechanism for driver
writers to always determine if the action will succeed
or not.
Additional information:
The eNonDestructiveSelfTest performs
limited testing on the printer and its attached paper
handling devices. After the self-test is complete a
configuration page is printed. The recommended way to
cause a configuration page to be printed is to use the
PRINT-INTERNAL-PAGE object. A continuous self test
cannot be started or terminated using this OID.
When the printer is idle, setting this object to
eNonDestructiveSelfTest results in a status of
a value of eNonDestructiveSelfTest being returned. If
the printer is not idle (whether printing an external
job, printing an internal page or running self test), a
status of
be returned with a value of eNotInASelfTest.
When the printer is idle, setting this object to
eNonDestructiveSelfTest causes the configuration page to
be formatted and put in the printer's print queue.
Attempting to set this object before the configuration
page has completed being formatted and printed will
cause
returned with a value of eNotInASelfTest.
After the configuration page is in the queue, a get on
this object will return a value of eNotInASelfTest.
Setting the value to eNotInASelfTest is not supported on
the Laserjet 3200. Once the test has started, it
will finish printing.
Likewise, if the PRINT-INTERNAL-PAGE object is set to a
valid value and that page has not printed when this
object is set to eNonDestructiveSelfTest, a status of
eNotInASelfTest will be returned until the internal page
has printed.
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
Writing this object allows a device self test to be
started. Reading this object provides an indication
what self-test is currently executing, if any. Actual
self-test operation is device specific. A self test may
not be allowed at any arbitrary time. If the device
supports the requested self test, but can not start the
execution of the self test when requested, the device
will respond with
If a non-destructive self test is being started, the device
will generate a response before the self test is
completed.
RECOMMENDATION: If the device is ready (i.e. the NOT-
READY-PRINTER object does not contain any items, except
maybe being off-line) and is idle (i.e. the NOT-IDLE
object does not contain any items), this request should
always succeed. This provides a mechanism for driver
writers to always determine if the action will succeed
or not.
Additional information:
The eNonDestructiveSelfTest performs limited
testing on the printer and its attached paper handling
devices. After the self-test is complete a
configuration page is printed. The recommended
way to cause a configuration page to be printed is to
use the PRINT-INTERNAL-PAGE object.
A continuous self test cannot be started
or terminated using this OID.
The printer must be idle before it can execute a
self test. The best method to assure that the
printer is idle is to set the object ON-OFF-LINE to
eOfflineAtEndOfJob, wait for the printer to be
offline and then execute the self test. The printer
will put itself online to print the page.
When the printer is idle, setting this object to
eNonDestructiveSelfTest results in a status of
and a value of eNonDestructiveSelfTest being returned.
If the printer is not idle (whether printing an
external job, printing an internal page or running
self test), a status of
returned with a value of eNotInASelfTest.
When the printer is idle, setting this object to
eNonDestructiveSelfTestcauses some internal testing,
the page to be formatted and put in the printer's
print queue. Before the page is in the print queue, a
get on this object will return eNonDestructiveSelfTest
(it is currently estimated that the time to format the
page is one millisecond).
Attempting to set this object before the page has
completed being formatted and printed will cause
returned with a value of eNotInASelfTest.
After the page is in the queue, a get on this object
will return a value of eNotInASelfTest.
Setting this object to eNonDestructiveSelfTest
before the first page has completed results in
a status of
with a value of eNotInASelfTest.
Likewise, if the PRINT-INTERNAL-PAGE object is set to
a valid value and that page has not printed
when this object is set to eNonDestructiveSelfTest, a
status of
with a value of eNotInASelfTest will be
returned until the internal page has printed.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
self-test OBJECT-TYPE SYNTAX INTEGER { eNotInASelfTest(1), eNonDestructiveSelfTest(4) } ACCESS read-write STATUS optional DESCRIPTION "Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual self-test operation is device specific. A self test may not be allowed at any arbitrary time. If the device supports the requested self test, but can not start the execution of the self test when requested, the device will respond with
. If a non-destructive self test is being started, the device will generate a response before the self test is completed. RECOMMENDATION: If the device is ready (i.e. the NOT- READY-PRINTER object does not contain any items, except maybe being off-line) and is idle (i.e. the NOT-IDLE object does not contain any items), this request should always succeed. This provides a mechanism for driver writers to always determine if the action will succeed or not. Additional information: The eNonDestructiveSelfTest performs limited testing on the printer and its attached paper handling devices. After the self-test is complete a configuration page is printed. The recommended way to cause a configuration page to be printed is to use the PRINT-INTERNAL-PAGE object. A continuous self test cannot be started or terminated using this OID. When the printer is idle, setting this object to eNonDestructiveSelfTest results in a status of and a value of eNonDestructiveSelfTest being returned. If the printer is not idle (whether printing an external job, printing an internal page or running self test), a status of status will be returned with a value of eNotInASelfTest. When the printer is idle, setting this object to eNonDestructiveSelfTest causes the configuration page to be formatted and put in the printer's print queue. Attempting to set this object before the configuration page has completed being formatted and printed will cause status to be returned with a value of eNotInASelfTest. After the configuration page is in the queue, a get on this object will return a value of eNotInASelfTest. Setting the value to eNotInASelfTest is not supported on the Laserjet 3200. Once the test has started, it will finish printing. Likewise, if the PRINT-INTERNAL-PAGE object is set to a valid value and that page has not printed when this object is set to eNonDestructiveSelfTest, a status of status with a value of eNotInASelfTest will be returned until the internal page has printed." ::= { test 1 }
self-test OBJECT-TYPE SYNTAX INTEGER { eNotInASelfTest(1), eNonDestructiveSelfTest(4) } ACCESS read-write STATUS optional DESCRIPTION "Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual self-test operation is device specific. A self test may not be allowed at any arbitrary time. If the device supports the requested self test, but can not start the execution of the self test when requested, the device will respond with
. If a non-destructive self test is being started, the device will generate a response before the self test is completed. RECOMMENDATION: If the device is ready (i.e. the NOT- READY-PRINTER object does not contain any items, except maybe being off-line) and is idle (i.e. the NOT-IDLE object does not contain any items), this request should always succeed. This provides a mechanism for driver writers to always determine if the action will succeed or not. Additional information: The eNonDestructiveSelfTest performs limited testing on the printer and its attached paper handling devices. After the self-test is complete a configuration page is printed. The recommended way to cause a configuration page to be printed is to use the PRINT-INTERNAL-PAGE object. A continuous self test cannot be started or terminated using this OID. The printer must be idle before it can execute a self test. The best method to assure that the printer is idle is to set the object ON-OFF-LINE to eOfflineAtEndOfJob, wait for the printer to be offline and then execute the self test. The printer will put itself online to print the page. When the printer is idle, setting this object to eNonDestructiveSelfTest results in a status of and a value of eNonDestructiveSelfTest being returned. If the printer is not idle (whether printing an external job, printing an internal page or running self test), a status of status will be returned with a value of eNotInASelfTest. When the printer is idle, setting this object to eNonDestructiveSelfTestcauses some internal testing, the page to be formatted and put in the printer's print queue. Before the page is in the print queue, a get on this object will return eNonDestructiveSelfTest (it is currently estimated that the time to format the page is one millisecond). Attempting to set this object before the page has completed being formatted and printed will cause status to be returned with a value of eNotInASelfTest. After the page is in the queue, a get on this object will return a value of eNotInASelfTest. Setting this object to eNonDestructiveSelfTest before the first page has completed results in a status of status with a value of eNotInASelfTest. Likewise, if the PRINT-INTERNAL-PAGE object is set to a valid value and that page has not printed when this object is set to eNonDestructiveSelfTest, a status of status with a value of eNotInASelfTest will be returned until the internal page has printed." ::= { test 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.2 | print-internal-page | 0 | 0 | Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generate… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.3 | testMainChannelLoopType1 | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.4 | testMainChannelLoopType2 | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.5 | testGeneratorDetector | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.6 | testGCT | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.7 | testTime, engine-self-diagnostic | 0 | 0 | The ENGINE-SELF-DIAGNOSTIC object reveals current Engine Failures; it returns a BINARY string of two-byte Motor, Clutch, Solenoid… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.8 | testSyncTime, engine-parameter | 0 | 0 | The ENGINE-PARAMETER object returns a device specific set ofengine parameters as a binary string of byte values. It will benece… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.9 | testNoSyncTime | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.10 | testErrorsPerSec | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.11 | testTotalErrorNumber | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.12 | testBER | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.13 | testErrorsPerSecBWSZ | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.14 | testTotalErrorNumberBWSZ | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.15 | testBERBWSZ | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.16 | testSyncYesNo | 0 | 0 | None |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.17 | testStatus | 0 | 0 | None |