Returns or changes the amount of resource saving memory
set aside to hold permanent soft PCL resources.
Additional information:
The value returned by this object is the
amount of Resource Saving memory currently dedicated to
PCL, regardless of the value of RESOURCE-SAVING.
For a PCL-only printer, the value of this object is
zero. All memory is dedicated to PCL, but it is not
shown as such.
If PostScript is installed, the default value of this
object is as follows:
0 if RESOURCE-SAVING=eOff.
0 if <12M memory is installed.
400K if >=12M memory is installed and RESOURCE-SAVING=eOn.
400K if =12M memory is installed and RESOURCE-SAVING=eAuto.
plus 100K for each 1M over 12M memory installed.
If RESOURCE-SAVING=eOn, this object can be used to set
the amount of Resource Saving memory currently dedicated
to PCL. The range of values supported by this object are:
0 (disables resource saving for PCL).
400K bytes through (400K bytes + value of
MAXIMUM-RESOURCE-SAVING-MEMORY) in increments of 100K
bytes.
If a value is received that is greater than 0 and less
than 400K bytes, it will be snapped to 400K bytes and a
status of
returned.
If an unsupported value greater than 400K bytes is
received, it will be snapped down to the nearest 100K
value and a status of
will be returned.
Attempting to set this object when RESOURCE-SAVING is
eAuto or eOff will cause a status of
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
Returns or changes the amount of resource saving memory
set aside to hold permanent soft PCL resources.
Additional information:
The value returned by this object is the amount of
Resource Saving memory currently dedicated to PCL, regardless of the value of
RESOURCE-SAVING.
For a PCL-only printer, the value of this object is zero. All memory is
dedicated to PCL, but it is not shown as such.
If PostScript is installed without a duplex unit, the default value of this
object is as follows:
Zero if <13M memory is installed.
Zero if 13M memory is installed and RESOURCE-SAVING=eOff.
409600 if 13M memory is installed and RESOURCE-SAVING=eOn.
409600 if 13M memory is installed and RESOURCE-SAVING=eAuto; plus 102400 for
each 1M over 13M memory installed.
If PostScript is installed with a duplex unit, the default value of this
object is as follows:
Zero if <24M memory is installed.
Zero if 24M memory is installed and RESOURCE-SAVING=eOff.
409600 if 24M memory is installed and RESOURCE-SAVING=eOn.
409600 if 24M memory is installed and RESOURCE-SAVING=eAuto; plus 102400 for
each 1M over 24M memory installed.
If RESOURCE-SAVING=eOn, this object can be used to set the amount of Resource
Saving memory currently dedicated to PCL. The values supported are zero (to
turn resource saving off for PCL) and 409600 through 409600 plus the value of
MAXIMUM-RESOURCE-SAVING-MEMORY, in increments of 102400.
If a value is received that is between 1 and 409599, it will be snapped to
409600 and a status of
If an unsupported value greater than 409600 is received,
it will be snapped down to the nearest 102400 value
and a status of
Attempting to set this object when RESOURCE-SAVING
is eAuto or eOff will cause a status of
be returned.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
pcl-resource-saving-memory-size OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the amount of resource saving memory set aside to hold permanent soft PCL resources. Additional information: The value returned by this object is the amount of Resource Saving memory currently dedicated to PCL, regardless of the value of RESOURCE-SAVING. For a PCL-only printer, the value of this object is zero. All memory is dedicated to PCL, but it is not shown as such. If PostScript is installed, the default value of this object is as follows: 0 if RESOURCE-SAVING=eOff. 0 if <12M memory is installed. 400K if >=12M memory is installed and RESOURCE-SAVING=eOn. 400K if =12M memory is installed and RESOURCE-SAVING=eAuto. plus 100K for each 1M over 12M memory installed. If RESOURCE-SAVING=eOn, this object can be used to set the amount of Resource Saving memory currently dedicated to PCL. The range of values supported by this object are: 0 (disables resource saving for PCL). 400K bytes through (400K bytes + value of MAXIMUM-RESOURCE-SAVING-MEMORY) in increments of 100K bytes. If a value is received that is greater than 0 and less than 400K bytes, it will be snapped to 400K bytes and a status of
will be returned. If an unsupported value greater than 400K bytes is received, it will be snapped down to the nearest 100K value and a status of will be returned. Attempting to set this object when RESOURCE-SAVING is eAuto or eOff will cause a status of to be returned." ::= { pdl-pcl 2 }
pcl-resource-saving-memory-size OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Returns or changes the amount of resource saving memory set aside to hold permanent soft PCL resources. Additional information: The value returned by this object is the amount of Resource Saving memory currently dedicated to PCL, regardless of the value of RESOURCE-SAVING. For a PCL-only printer, the value of this object is zero. All memory is dedicated to PCL, but it is not shown as such. If PostScript is installed without a duplex unit, the default value of this object is as follows: Zero if <13M memory is installed. Zero if 13M memory is installed and RESOURCE-SAVING=eOff. 409600 if 13M memory is installed and RESOURCE-SAVING=eOn. 409600 if 13M memory is installed and RESOURCE-SAVING=eAuto; plus 102400 for each 1M over 13M memory installed. If PostScript is installed with a duplex unit, the default value of this object is as follows: Zero if <24M memory is installed. Zero if 24M memory is installed and RESOURCE-SAVING=eOff. 409600 if 24M memory is installed and RESOURCE-SAVING=eOn. 409600 if 24M memory is installed and RESOURCE-SAVING=eAuto; plus 102400 for each 1M over 24M memory installed. If RESOURCE-SAVING=eOn, this object can be used to set the amount of Resource Saving memory currently dedicated to PCL. The values supported are zero (to turn resource saving off for PCL) and 409600 through 409600 plus the value of MAXIMUM-RESOURCE-SAVING-MEMORY, in increments of 102400. If a value is received that is between 1 and 409599, it will be snapped to 409600 and a status of
returned. If an unsupported value greater than 409600 is received, it will be snapped down to the nearest 102400 value and a status of returned. Attempting to set this object when RESOURCE-SAVING is eAuto or eOff will cause a status of to be returned." ::= { pdl-pcl 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.2.0 | pcl-resource-saving-memory-size | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.1 | pcl-datecode | 1 | 1 | This indicates the PCL firmware date code in yyyymmdd format. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.3 | pcl-name | 1 | 1 | Contains the name of the PDL. For PCL, the name is `PCL'. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.4 | pcl-version | 1 | 1 | Contains the PDL version. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5 | pcl-total-page-count | 1 | 1 | Total number of PCL pages printed by the device. Additional information: In LaserJet 5Si the PCL page count is kept in NVRAM howev… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.11 | pcl-default-symbol-set | 1 | 1 | Returns or changes the default PCL symbol set. The enumeration values match the values supported by the PCL Symbol Set Code esca… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.13 | pcl-default-font-height | 1 | 1 | Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoin… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.14 | pcl-default-font-source, pcl-datecode | 1 | 1 | Returns or changes the value of the default font source variable in NVRAM. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.15 | pcl-default-font-number | 1 | 1 | Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to ge… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.16 | pcl-default-font-width | 1 | 1 | Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1… |