contains card types supported for this slot. com21Exp
specifies 10baseT or 100baseT or oc3.
intConn is the interconnect card used on the
expansion shelf (Shelf2).
rxIntConn is used to indicate a slot that can be
used for an RX, 100bT or 10bT card in the single shelf
configuration or for the interconnect card when an
expansion shelf is present.
rx indicates either RX or RXM cards.
On the expansion shelf there is support of up to
8 rx cards.
rxCom21Exp defines RX, oc3, 10bT or 100bT card for
slots 3 and 4. For all other slots it defines
Rx, 10bT or 100bT cards (This implies that
oc3 card is supported only in slots 2,3 and 4).
Note that there is a maximum of 5x10bT/100bT and
12xRX in the system.
maximum number of oc3 cards supported is 2
Release 2.3 software shall support the following slot
designations.
if hcxPhyConfigType = singleShelf:
Shelf 1
Slot 1 - cc
Slot 2 - com21Exp
Slot 3 - rxCom21Exp
Slot 4 - rxCom21Exp
Slot 5 - rxIntConn
Slot 6 - rxCom21Exp
Slot 7 - rxCom21Exp
Slot 8 - rx
Slot 9 - rx
Slot 10 - txDig
Slot 11 - tx
if hcxPhyConfigType = fullShelf:
Shelf 1 Shelf2
Slot 1 - cc Slot 1 - intConn
Slot 2 - com21Exp Slot 2 - rx
Slot 3 - rxCom21Exp Slot 3 - rx
Slot 4 - rxCom21Exp Slot 4 - rx
Slot 5 - rxIntConn Slot 5 - rx
Slot 6 - rxCom21Exp Slot 6 - rx
Slot 7 - rxCom21Exp Slot 7 - rx
Slot 8 - rx Slot 8 - rx
Slot 9 - rx Slot 9 - rx
Slot 10 - txDig Slot 10 - noCard
Slot 11 - tx Slot 11 - noCard
if hcxPhyConfigType = compactShelf:
Shelf 1
Slot 1 - cc
Slot 2 - com21Exp
Slot 3 - rxCom21Exp
Slot 4 - rx
Slot 5 - txDig
Slot 6 - tx
Parsed from file com21.hcxtop.mib.txt
Company: None
Module: COM21-HCXTOP-MIB
contains card types supported for this slot. com21Exp
specifies 10baseT or 100baseT or oc3.
intConn is the interconnect card used on the
expansion shelf (Shelf2).
rxIntConn is used to indicate a slot that can be
used for an RX, 100bT or 10bT card in the single shelf
configuration or for the interconnect card when an
expansion shelf is present.
rx indicates either RX or RXM cards.
On the expansion shelf there is support of up to
8 rx cards.
rxCom21Exp defines RX, oc3, 10bT or 100bT card for
slots 3 and 4. For all other slots it defines
Rx, 10bT or 100bT cards (This implies that
oc3 card is supported only in slots 2,3 and 4).
Note that there is a maximum of 5x10bT/100bT and
12xRX in the system.
maximum number of oc3 cards supported is 2
Release 2.3 software shall support the following slot
designations.
if hcxPhyConfigType = singleShelf:
Shelf 1
Slot 1 - cc
Slot 2 - com21Exp
Slot 3 - rxCom21Exp
Slot 4 - rxCom21Exp
Slot 5 - rxIntConn
Slot 6 - rxCom21Exp
Slot 7 - rxCom21Exp
Slot 8 - rx
Slot 9 - rx
Slot 10 - txDig
Slot 11 - tx
if hcxPhyConfigType = fullShelf:
Shelf 1 Shelf2
Slot 1 - cc Slot 1 - intConn
Slot 2 - com21Exp Slot 2 - rx
Slot 3 - rxCom21Exp Slot 3 - rx
Slot 4 - rxCom21Exp Slot 4 - rx
Slot 5 - rxIntConn Slot 5 - rx
Slot 6 - rxCom21Exp Slot 6 - rx
Slot 7 - rxCom21Exp Slot 7 - rx
Slot 8 - rx Slot 8 - rx
Slot 9 - rx Slot 9 - rx
Slot 10 - txDig Slot 10 - noCard
Slot 11 - tx Slot 11 - noCard
if hcxPhyConfigType = compactShelf:
Shelf 1
Slot 1 - cc
Slot 2 - com21Exp
Slot 3 - rxCom21Exp
Slot 4 - rx
Slot 5 - txDig
Slot 6 - tx
Parsed from file COM21-HCXTOP-MIB.mib
Module: COM21-HCXTOP-MIB
Vendor: Com21
Module: COM21-HCXTOP-MIB
[Automatically extracted from oidview.com]
hcxSlotSupportedTypes OBJECT-TYPE SYNTAX INTEGER { rx(1), tx(2), cc(3), com21Exp(4), txDig(5), intConn(6), rxIntConn(7), noCard(8), rxCom21Exp(9) } MAX-ACCESS read-only STATUS current DESCRIPTION " contains card types supported for this slot. com21Exp specifies 10baseT or 100baseT or oc3. intConn is the interconnect card used on the expansion shelf (Shelf2). rxIntConn is used to indicate a slot that can be used for an RX, 100bT or 10bT card in the single shelf configuration or for the interconnect card when an expansion shelf is present. rx indicates either RX or RXM cards. On the expansion shelf there is support of up to 8 rx cards. rxCom21Exp defines RX, oc3, 10bT or 100bT card for slots 3 and 4. For all other slots it defines Rx, 10bT or 100bT cards (This implies that oc3 card is supported only in slots 2,3 and 4). Note that there is a maximum of 5x10bT/100bT and 12xRX in the system. maximum number of oc3 cards supported is 2 Release 2.3 software shall support the following slot designations. if hcxPhyConfigType = singleShelf: Shelf 1 Slot 1 - cc Slot 2 - com21Exp Slot 3 - rxCom21Exp Slot 4 - rxCom21Exp Slot 5 - rxIntConn Slot 6 - rxCom21Exp Slot 7 - rxCom21Exp Slot 8 - rx Slot 9 - rx Slot 10 - txDig Slot 11 - tx if hcxPhyConfigType = fullShelf: Shelf 1 Shelf2 Slot 1 - cc Slot 1 - intConn Slot 2 - com21Exp Slot 2 - rx Slot 3 - rxCom21Exp Slot 3 - rx Slot 4 - rxCom21Exp Slot 4 - rx Slot 5 - rxIntConn Slot 5 - rx Slot 6 - rxCom21Exp Slot 6 - rx Slot 7 - rxCom21Exp Slot 7 - rx Slot 8 - rx Slot 8 - rx Slot 9 - rx Slot 9 - rx Slot 10 - txDig Slot 10 - noCard Slot 11 - tx Slot 11 - noCard if hcxPhyConfigType = compactShelf: Shelf 1 Slot 1 - cc Slot 2 - com21Exp Slot 3 - rxCom21Exp Slot 4 - rx Slot 5 - txDig Slot 6 - tx" ::= { com21HcxSlotEntry 3 }
hcxSlotSupportedTypes OBJECT-TYPE SYNTAX INTEGER { rx(1), tx(2), cc(3), com21Exp(4), txDig(5), intConn(6), rxIntConn(7), noCard(8), rxCom21Exp(9) } MAX-ACCESS read-only STATUS current DESCRIPTION " contains card types supported for this slot. com21Exp specifies 10baseT or 100baseT or oc3. intConn is the interconnect card used on the expansion shelf (Shelf2). rxIntConn is used to indicate a slot that can be used for an RX, 100bT or 10bT card in the single shelf configuration or for the interconnect card when an expansion shelf is present. rx indicates either RX or RXM cards. On the expansion shelf there is support of up to 8 rx cards. rxCom21Exp defines RX, oc3, 10bT or 100bT card for slots 3 and 4. For all other slots it defines Rx, 10bT or 100bT cards (This implies that oc3 card is supported only in slots 2,3 and 4). Note that there is a maximum of 5x10bT/100bT and 12xRX in the system. maximum number of oc3 cards supported is 2 Release 2.3 software shall support the following slot designations. if hcxPhyConfigType = singleShelf: Shelf 1 Slot 1 - cc Slot 2 - com21Exp Slot 3 - rxCom21Exp Slot 4 - rxCom21Exp Slot 5 - rxIntConn Slot 6 - rxCom21Exp Slot 7 - rxCom21Exp Slot 8 - rx Slot 9 - rx Slot 10 - txDig Slot 11 - tx if hcxPhyConfigType = fullShelf: Shelf 1 Shelf2 Slot 1 - cc Slot 1 - intConn Slot 2 - com21Exp Slot 2 - rx Slot 3 - rxCom21Exp Slot 3 - rx Slot 4 - rxCom21Exp Slot 4 - rx Slot 5 - rxIntConn Slot 5 - rx Slot 6 - rxCom21Exp Slot 6 - rx Slot 7 - rxCom21Exp Slot 7 - rx Slot 8 - rx Slot 8 - rx Slot 9 - rx Slot 9 - rx Slot 10 - txDig Slot 10 - noCard Slot 11 - tx Slot 11 - noCard if hcxPhyConfigType = compactShelf: Shelf 1 Slot 1 - cc Slot 2 - com21Exp Slot 3 - rxCom21Exp Slot 4 - rx Slot 5 - txDig Slot 6 - tx" ::= { com21HcxSlotEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.8.1.1.1 | hcxShelfNo | 0 | 0 | contains ComController shelf id. |
1.3.6.1.4.1.1141.2.8.1.1.2 | hcxSlotId | 0 | 0 | contains ComController slot id. |
1.3.6.1.4.1.1141.2.8.1.1.4 | hcxSlotConfigCardType | 0 | 0 | contains card type configured for this slot. This attribute will be checked against the set of supported card types and rejected … |
1.3.6.1.4.1.1141.2.8.1.1.5 | hcxSlotInsertCardType | 0 | 0 | contains card type inserted in the ComController slot. A value of empty shall be stored if there is no card. |