A list of all of the configuration and status
information relating to the operation of the 802.1d
Spanning Tree Protocol.
Parsed from file nnci.mib.txt
Company: newbridge
Module: NEWBRIDGE-MIB
Vendor: Newbridge Networks Corporation
Module: NEWBRIDGE-MIB
[Automatically extracted from oidview.com]
nnciStpTableEntry OBJECT-TYPE SYNTAX NnciStpTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of all of the configuration and status information relating to the operation of the 802.1d Spanning Tree Protocol." ::= {nnciStpTable 1}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.123.2.63.1.1.1 | nnciStpEnable | 0 | 0 | This object enables or disables the Spanning Tree Protocol. If the protocol is disabled, the bridge acts as a simple bridge, whi… |
1.3.6.1.4.1.123.2.63.1.1.2 | nnciStpBridgePriority | 0 | 0 | This object determines the role of the bridge in the spanning tree. It is used to decide which bridge in the network should be th… |
1.3.6.1.4.1.123.2.63.1.1.3 | nnciStpRoot | 0 | 0 | This object identifies the bridge that is the root of the spanning tree. |
1.3.6.1.4.1.123.2.63.1.1.4 | nnciStpRootPathCost | 0 | 0 | This cost of a path is the sum of the costs of the individual hops along the path to the root, where the cost of a hop is a user-… |
1.3.6.1.4.1.123.2.63.1.1.5 | nnciStpRootInterface | 0 | 0 | This object indicates the interface currently used to send messages to the root bridge. It is chosen as the interface which prov… |
1.3.6.1.4.1.123.2.63.1.1.6 | nnciStpMaxAge | 0 | 0 | This object defines the maximum permissible age in seconds of the configuration information held for each interface. If the info… |
1.3.6.1.4.1.123.2.63.1.1.7 | nnciStpHelloTime | 0 | 0 | This object is the value of the HelloTimer used by the root bridge. The present Spanning Tree protocol propogates this value, but… |
1.3.6.1.4.1.123.2.63.1.1.8 | nnciStpForwardDelay | 0 | 0 | This object defines the number of seconds that an interface is kept in the listening or learning state before being moved to the … |
1.3.6.1.4.1.123.2.63.1.1.9 | nnciStpMyMaxAge | 0 | 0 | This object is assigned to nnciStpMaxAge if this bridge becomes the root of the spanning tree. |
1.3.6.1.4.1.123.2.63.1.1.10 | nnciStpMyHelloTime | 0 | 0 | This object is the interval between transmission of configuration BPDUs (also called Hello messages) by the bridge. This object i… |
1.3.6.1.4.1.123.2.63.1.1.11 | nnciStpMyForwardDelay | 0 | 0 | This object is assigned to nnciStpForwardDelay if this bridge becomes the root of the Spanning Tree. |
1.3.6.1.4.1.123.2.63.1.1.12 | nnciStpTopologyChangeDetected | 0 | 0 | If this object is true, then this bridge has detected a topology change recently and is sending topology change notifications (TC… |
1.3.6.1.4.1.123.2.63.1.1.13 | nnciStpSendingTopologyChange | 0 | 0 | If this object is true, then the bridge has recently received a configuration BPDU with the topology change flag set. This indica… |
1.3.6.1.4.1.123.2.63.1.1.14 | nnciStpTimeSinceLastTopologyChange | 0 | 0 | This object provides the elapsed time in seconds since the last change in network topology. This object is set to zero when a br… |
1.3.6.1.4.1.123.2.63.1.1.15 | nnciStpTopologyChanges | 0 | 0 | This object indicates the number of times that the topology change flag has been set to true since the last bridge reset. |
1.3.6.1.4.1.123.2.63.1.1.16 | nnciStpTopologyChangeAck | 0 | 0 | This flag indicates whether the topology change acknowledge flag should be set in the next hello message generated on this interf… |
1.3.6.1.4.1.123.2.63.1.1.17 | nnciStpInterfacePriority | 0 | 0 | This object is a user-settable priority assigned to each interface. The interface priority allows the network manager to indicat… |
1.3.6.1.4.1.123.2.63.1.1.18 | nnciStpInterfaceCost | 0 | 0 | This object indicates the relative cost of sending a frame out on a given interface. It is computed in the following manner. If n… |
1.3.6.1.4.1.123.2.63.1.1.19 | nnciStpDesignatedBridge | 0 | 0 | This object specifies the designated bridge for the link (LAN or WAN) attached to the interface. Specifically, it is the id of th… |
1.3.6.1.4.1.123.2.63.1.1.20 | nnciStpDesignatedInterface | 0 | 0 | This object indicates the interface that the bridge given by nnciStpDesignatedBridge uses to send configuration messages over the… |
1.3.6.1.4.1.123.2.63.1.1.21 | nnciStpDesignatedRoot | 0 | 0 | This object indicates who the designated bridge thinks is the root (i.e., what the value of nnciStpRoot is on the bridge given by… |
1.3.6.1.4.1.123.2.63.1.1.22 | nnciStpDesignatedCost | 0 | 0 | This object provides the cost of the cheapest path between nnciStpDesignatedBridge and nnciStpDesignatedRoot. |
1.3.6.1.4.1.123.2.63.1.1.23 | nnciStpConfigurationMessagePending | 0 | 0 | If this object is true, then a configuration BPDU has been queued for transmission due to the transmission of another configurati… |
1.3.6.1.4.1.123.2.63.1.1.24 | nnciStpAllowableDeviations | 0 | 0 | This object specifies those deviations from the 802.1d document that will be tolerated by the bridge. If the bit in the specified… |
1.3.6.1.4.1.123.2.63.1.1.25 | nnciStpCostMultiplier | 0 | 0 | This object is the weight assigned to the default cost, expressed as a percentage. That is, a multiplier of 50 means the interfac… |
1.3.6.1.4.1.123.2.63.1.1.26 | nnciStpUserAssignedCost | 0 | 0 | This object is used to determine the cost assigned to a interface. See the description of nnciStpInterfaceCost for the details. |