The field specifies the default timezone for the group.
This can be overwritten on a per Array basis. The default is EST.
We need to file in all the supported TZ. For now we punt and do GMT as the catch all.
Parsed from file eqlmember.mib.txt
Company: equallogic
Module: EQLMEMBER-MIB
Vendor: EqualLogic
Module: EQLMEMBER-MIB (eqlmember.mib)
Type: TABULAR
Access: read-create
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
eqlMemberTimeZone OBJECT-TYPE SYNTAX INTEGER { hst(1), ast(2), pst(3), pnt(4), mst(5), cst(6), est(7), iet(8), prt(9), gmt(10), ect(11), eet(12), eat(13), met(14), net(15), plt(16), ist(17), bst(18), vst(19), ctt(20), jst(21), act(22), aet(23), sst(24), nst(25), mit(26), cnt(27), agt(28), bet(29), cat(30) } MAX-ACCESS read-create STATUS current DESCRIPTION "The field specifies the default timezone for the group. This can be overwritten on a per Array basis. The default is EST. We need to file in all the supported TZ. For now we punt and do GMT as the catch all." DEFVAL { est } ::= { eqlMemberEntry 3}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.12740.2.1.1.1.1 | eqlMemberIndex | 0 | 0 | This field unique identifies an array within a group. |
| 1.3.6.1.4.1.12740.2.1.1.1.2 | eqlMemberDateAndTime | 0 | 0 | This field is dynamic, it contains the date and time for the array. There is no default value. |
| 1.3.6.1.4.1.12740.2.1.1.1.4 | eqlMemberAdjustDaylightSavTime | 0 | 0 | This field specifies whether or not dayLight savings time should be applied to the time. The default value is enabled. |
| 1.3.6.1.4.1.12740.2.1.1.1.5 | eqlMemberDefaultRoute | 0 | 0 | This field is used to indicate the default gateway for the group. This value can be overriden on a per array basis. This field co… |
| 1.3.6.1.4.1.12740.2.1.1.1.6 | eqlMemberSite | 0 | 0 | This field specifies the site where the volume res ides. Sites are defined on a per array basis. Sites are used to define where p… |
| 1.3.6.1.4.1.12740.2.1.1.1.7 | eqlMemberDescription | 0 | 0 | This field contains a description of the array. For example the location of the array. There is no default. |
| 1.3.6.1.4.1.12740.2.1.1.1.8 | eqlMemberUUID | 0 | 0 | EQL-SECONDARY-KEY This field is for internal use only. |
| 1.3.6.1.4.1.12740.2.1.1.1.9 | eqlMemberName | 0 | 0 | This field specifies the name of the array. This name must be unique within the group. It can be a DNS name, though it is not req… |
| 1.3.6.1.4.1.12740.2.1.1.1.10 | eqlMemberRowStatus | 0 | 0 | This RowStatus is used only to delete a member. The row in this table could be created only by the subsystem. |
| 1.3.6.1.4.1.12740.2.1.1.1.11 | eqlMemberState | 0 | 0 | The field specifies the desired state of the array. Currently setting this value to vacate is the only operation that is supporte… |
| 1.3.6.1.4.1.12740.2.1.1.1.12 | eqlMemberPolicySingleControllerSafe | 0 | 0 | This field specifies the cache policy if we boot with only one CM. |
| 1.3.6.1.4.1.12740.2.1.1.1.13 | eqlMemberPolicyLowBatterySafe | 0 | 0 | This field specifies the cache policy if the battery charge is below tolerance. |
| 1.3.6.1.4.1.12740.2.1.1.1.14 | eqlMemberVersion | 0 | 0 | This field specifies the competibility level of a member. |
| 1.3.6.1.4.1.12740.2.1.1.1.15 | eqlMemberDelayDataMove | 0 | 0 | When a new member is added to the group the value of this column will be zero(unconfigured). Before configuring raid-policy , th… |
| 1.3.6.1.4.1.12740.2.1.1.1.16 | eqlMemberDefaultInetRouteType | 0 | 0 | eqlMemberDefaultInetRouteType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This field i… |
| 1.3.6.1.4.1.12740.2.1.1.1.17 | eqlMemberDefaultInetRoute | 0 | 0 | eqlMemberDefaultInetRoute OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field is used t… |
| 1.3.6.1.4.1.12740.2.1.1.1.18 | eqlMemberDriveMirroring | 0 | 0 | eqlMemberDriveMirroring OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } MAX-ACCESS read-write STATUS current DESCRIPTION… |
| 1.3.6.1.4.1.12740.2.1.1.1.19 | eqlMemberProfileIndex | 0 | 0 | eqlMemberProfileIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This field … |
| 1.3.6.1.4.1.12740.2.1.1.1.20 | eqlMemberControllerType | 0 | 0 | eqlMemberControllerType OBJECT-TYPE SYNTAX DisplayString( SIZE( 0..32 ) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This… |
| 1.3.6.1.4.1.12740.2.1.1.1.21 | eqlMemberControllerMajorVersion | 0 | 0 | eqlMemberControllerMajorVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable sp… |
| 1.3.6.1.4.1.12740.2.1.1.1.22 | eqlMemberControllerMinorVersion | 0 | 0 | eqlMemberControllerMinorVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable sp… |
| 1.3.6.1.4.1.12740.2.1.1.1.23 | eqlMemberControllerMaintenanceVersion | 0 | 0 | eqlMemberControllerMaintenanceVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This varia… |
| 1.3.6.1.4.1.12740.2.1.1.1.24 | eqlMemberCompressionCapable | 0 | 0 | eqlMemberCompressionCapable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable specif… |