Disk status will be on-line when the disk is being used in the raid set.
Disk status will be spare when the disk is not currently being used by raid configuration
but may be used when status of a currently on-line disk changes.
Disk status will be failed when either it is faulted or when there is no power.
Disk status will be offline when the disk doesn't fall into any of these other categories.
Disk status will be too-small if drive is too small to be used. The drive cannot be converted to spare.
Disk status will be history-of-failures if drive has a history of failures.The drive can ne converted to spare.
Disk status will be unsupported-version if drive label is from a later release.The drive can ne converted to spare.
This set is not complete.
Parsed from file eqldisk.mib.txt
Company: equallogic
Module: EQLDISK-MIB
Vendor: EqualLogic
Module: EQLDISK-MIB (eqldisk.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
eqlDiskStatus OBJECT-TYPE SYNTAX INTEGER { on-line (1), spare (2), failed (3), off-line (4), alt-sig (5), too-small(6), history-of-failures(7), unsupported-version(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Disk status will be on-line when the disk is being used in the raid set. Disk status will be spare when the disk is not currently being used by raid configuration but may be used when status of a currently on-line disk changes. Disk status will be failed when either it is faulted or when there is no power. Disk status will be offline when the disk doesn't fall into any of these other categories. Disk status will be too-small if drive is too small to be used. The drive cannot be converted to spare. Disk status will be history-of-failures if drive has a history of failures.The drive can ne converted to spare. Disk status will be unsupported-version if drive label is from a later release.The drive can ne converted to spare. This set is not complete. " ::= { eqlDiskEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.12740.3.1.1.1.1 | eqlDiskIndex | 0 | 0 | The index value that uniquely identifies the disk. It is equal to the disk slot number plus one. |
| 1.3.6.1.4.1.12740.3.1.1.1.2 | eqlDiskType | 0 | 0 | This variable specifies disk type. |
| 1.3.6.1.4.1.12740.3.1.1.1.3 | eqlDiskModelNumber | 0 | 0 | This variable specifies disk model. |
| 1.3.6.1.4.1.12740.3.1.1.1.4 | eqlDiskRevisionNumber | 0 | 0 | This variable specifies disk revision number. |
| 1.3.6.1.4.1.12740.3.1.1.1.5 | eqlDiskSerialNumber | 0 | 0 | This variable specifies disk serial number. |
| 1.3.6.1.4.1.12740.3.1.1.1.6 | eqlDiskSize | 0 | 0 | This variable specifies disk size in MB. |
| 1.3.6.1.4.1.12740.3.1.1.1.7 | eqlDiskAdminStatus | 0 | 0 | Command to take disk off line or put it on line. This command is used in manual operation by the operator. |
| 1.3.6.1.4.1.12740.3.1.1.1.9 | eqlDiskErrors | 0 | 0 | This variable specifies the number of disk error since drive power on. |
| 1.3.6.1.4.1.12740.3.1.1.1.10 | eqlDiskId | 0 | 0 | This variable specifies disk id as specified by the subsystem. |
| 1.3.6.1.4.1.12740.3.1.1.1.11 | eqlDiskSlot | 0 | 0 | The disk slot number as marked on the back panel, 0..13. |
| 1.3.6.1.4.1.12740.3.1.1.1.12 | eqlDiskTypeEnum | 0 | 0 | Type of this disk. |
| 1.3.6.1.4.1.12740.3.1.1.1.13 | eqlDiskRPM | 0 | 0 | eqlDiskRPM OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable specifies the disk RPM(R… |
| 1.3.6.1.4.1.12740.3.1.1.1.14 | eqlDiskSectorSize | 0 | 0 | eqlDiskSectorSize OBJECT-TYPE SYNTAX INTEGER { sector-size-512-bytes(0), sector-size-4096-bytes(1), sector-size-unknown(2) } MA… |
| 1.3.6.1.4.1.12740.3.1.1.1.15 | eqlDiskManufacturingInfo | 0 | 0 | eqlDiskManufacturingInfo OBJECT-TYPE SYNTAX DisplayString( SIZE(0..20) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This … |
| 1.3.6.1.4.1.12740.3.1.1.1.16 | eqlDiskPI | 0 | 0 | eqlDiskPI OBJECT-TYPE SYNTAX INTEGER { pi-disabled(0), pi-enabled(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This va… |
| 1.3.6.1.4.1.12740.3.1.1.1.17 | eqlDiskHealth | 0 | 0 | eqlDiskHealth OBJECT-TYPE SYNTAX INTEGER { smart-status-not-available(0), smart-ok(1), smart-tripped(2) } MAX-ACCESS read-only … |