Reference record for OID 1.3.6.1.4.1.15.2.1.6


parent
1.3.6.1.4.1.15.2.1 (hw)
node code
6
node name
e2Size
dot oid
1.3.6.1.4.1.15.2.1.6
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) hw(1) e2Size(6)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) hw(1) e2Size(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) hw(1) e2Size(6)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) hw(1) e2Size(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) hw(1) e2Size(6)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) hw(1) e2Size(6)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/xylogics/annex/hw/e2Size
  • /iso/identified-organization/dod/internet/private/enterprises/xylogics/annex/hw/e2Size
  • /iso/org/dod/internet/private/enterprise/xylogics/annex/hw/e2Size
  • /iso/org/dod/internet/private/enterprises/xylogics/annex/hw/e2Size
  • /iso/iso-identified-organization/dod/internet/private/enterprise/xylogics/annex/hw/e2Size
  • /iso/iso-identified-organization/dod/internet/private/enterprises/xylogics/annex/hw/e2Size
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/15/2/1/6

    Description by mibdepot

    The size of EEPROM present in the unit,
    reported in KB. EEPROM is used to store
    configuration parameters and filter definitions
    for all platforms. Self boot units also store
    other configuration files that define information
    such as default routes, snmp community strings,
    etc. in EEPROM.

    Parsed from file xylo-anx.mib.txt
    Company: avaya
    Module: XYLO-ANNEX-MIB

    Information by oid_info

    Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.

    Information by mibdepot

    e2Size OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The size of EEPROM present in the unit, reported in KB. EEPROM is used to store configuration parameters and filter definitions for all platforms. Self boot units also store other configuration files that define information such as default routes, snmp community strings, etc. in EEPROM." ::= { hw 6 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.15)

    Barnes Jim

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.15.2.1.6.0 e2Size 0 0 None

    Brothers (10)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.15.2.1.1 hwType 1 1 An identifier for the Annex hardware type.
    1.3.6.1.4.1.15.2.1.2 hwRev 1 1 The revision level of the hardware platform.
    1.3.6.1.4.1.15.2.1.3 romRev 1 1 The revision number of the ROM Monitor software.
    1.3.6.1.4.1.15.2.1.4 serialNumber 1 1 The serial number assigned to the unit.
    1.3.6.1.4.1.15.2.1.5 memorySize 1 1 The amount of memory present in the unit.
    1.3.6.1.4.1.15.2.1.7 flashSize 1 1 The size of the FLASH memory in the unit,
    reported in MB. If the ROM revision in the
    unit is less than 0750, the size is not ava…
    1.3.6.1.4.1.15.2.1.8 netHwType 1 1 The type of LAN interface hardware in the unit.
    1.3.6.1.4.1.15.2.1.9 macAddress 1 1 The serial number assigned to the unit is now
    the MAC address.
    1.3.6.1.4.1.15.2.1.10 totalmodems 1 1 The total number of internal modems on the board.
    Incase of having more than 1 T1 engines this will
    be the sum of all the interna…
    1.3.6.1.4.1.15.2.1.11 compressionCardHwRev 1 1 The compression card hardware revision for 5399
    and ra8000 platforms. If the card is not present
    the string -not present- will be…