This parameter communicates the NAS port identification
to the RADIUS server. The default for this parameter is device.
In the default mode the NAS port is encoded as a unit number.
When set to channel the format is twwcc where -
t - the type of device (1 for digital and 2 for
analog devices)
ww - the wan number
cc - the channel number
This parameter may also be used in conjunction with
NAS-Port-Type to identify the port resource the user is using.
To illustrate -
When NAS-Port-Type is set to 'virtual' the NAS-port encodes the
type of virtual port as follows -
values (2000 + port index) Annex virtual
values (3000 + port index) Annex dialout
values (4000 + port index) Annex ethernet
values (5000 + port index) - Annex VPN
values (6000 + port index) - Annex MP
In the case of channel, it encodes it as follows -
values (200 + port index) Annex virtual
values (300 + port index) Annex dialout
values (400 + port index) Annex ethernet
values (500 + port index) - Annex VPN
values (600 + port index) - Annex MP
This object correponds to the NA.Admin
parameter 'radius_port_encoding'.
Parsed from file xylo-anx.mib.txt
Company: avaya
Module: XYLO-ANNEX-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
radiusPortEncoding OBJECT-TYPE SYNTAX INTEGER { device(1), channel(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter communicates the NAS port identification to the RADIUS server. The default for this parameter is device. In the default mode the NAS port is encoded as a unit number. When set to channel the format is twwcc where - t - the type of device (1 for digital and 2 for analog devices) ww - the wan number cc - the channel number This parameter may also be used in conjunction with NAS-Port-Type to identify the port resource the user is using. To illustrate - When NAS-Port-Type is set to 'virtual' the NAS-port encodes the type of virtual port as follows - values (2000 + port index) Annex virtual values (3000 + port index) Annex dialout values (4000 + port index) Annex ethernet values (5000 + port index) - Annex VPN values (6000 + port index) - Annex MP In the case of channel, it encodes it as follows - values (200 + port index) Annex virtual values (300 + port index) Annex dialout values (400 + port index) Annex ethernet values (500 + port index) - Annex VPN values (600 + port index) - Annex MP This object correponds to the NA.Admin parameter 'radius_port_encoding'." ::= { radiusConfig 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.15.2.103.1.9.0 | radiusPortEncoding | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.15.2.103.1.2 | enableRadiusAcct | 1 | 1 | If this object is set to yes(1), radius accounting is enabled Setting this parameter to Y also forces that the accounting server … |
1.3.6.1.4.1.15.2.103.1.3 | radiusAuth1Port | 1 | 1 | This parameter sets the UDP port # that the primary radius server is listening on. The default is port 1645. This MIB object corr… |
1.3.6.1.4.1.15.2.103.1.4 | radiusAcct1Port | 1 | 1 | This parameter sets the UDP port # that the primary radius accounting server is listening on. The default is port 1646. This MIB … |
1.3.6.1.4.1.15.2.103.1.5 | radiusSecret | 1 | 1 | This value contains the radius shared secret for this RAS and the primary Radius server. We recommend this value be at least 16 c… |
1.3.6.1.4.1.15.2.103.1.7 | radiusRetries | 1 | 1 | This is the number of times to retry the access-request/ accounting request packets before falling over to the secondary host. Th… |
1.3.6.1.4.1.15.2.103.1.8 | radiusAcctLevel | 1 | 1 | This sets the level of radius accounting. Standard restricts the annex to logs of start(1), stop(2), accounting on (7) and accoun… |
1.3.6.1.4.1.15.2.103.1.10 | radiusUserPrompt | 1 | 1 | This parameter defines the prompt string for requesting user name. The prompt string consists of displayable characters and embe… |
1.3.6.1.4.1.15.2.103.1.11 | radiusPassPrompt | 1 | 1 | This parameter defines the prompt string for requesting passwords. The prompt string consists of displayable characters and embe… |
1.3.6.1.4.1.15.2.103.1.12 | radiusPrefAcct1Host | 1 | 1 | The Internet address of the primary host where the Annex sends its accounting requests. This MIB object corresponds to the NA/adm… |
1.3.6.1.4.1.15.2.103.1.13 | radiusPrefAcct2Host | 1 | 1 | The Internet address of the radius accounting host where the Annex sends its accounting requests. This MIB object corresponds to … |
1.3.6.1.4.1.15.2.103.1.14 | radiusAcct1Secret | 1 | 1 | This value contains the shared secret for this RAS and the primary accounting server. We recommend this value be at least 16 char… |
1.3.6.1.4.1.15.2.103.1.15 | radiusAcct2Secret | 1 | 1 | This value contains the shared secret for this RAS and the secondary accounting server. We recommend this value be at least 16 ch… |
1.3.6.1.4.1.15.2.103.1.16 | radiusAuth2Secret | 1 | 1 | This value contains the shared secret for this RAS and the secondary Radius server. We recommend this value be at least 16 charac… |
1.3.6.1.4.1.15.2.103.1.17 | radiusAuth2Port | 1 | 1 | This parameter sets the UDP port number that the secondary radius server is listening on. The default is port 1645. This MIB obje… |
1.3.6.1.4.1.15.2.103.1.18 | radiusAcct2Port | 1 | 1 | This parameter sets the UDP port # that the secondary radius accounting server is listening on. The default is port 1646. This MI… |
1.3.6.1.4.1.15.2.103.1.19 | radiusCompatibility | 1 | 1 | Values of this object can either be set to BayNetworks or USR to indicate how to handle RADIUS attributes. Change of this paramet… |
1.3.6.1.4.1.15.2.103.1.20 | radiusAuthTimeout | 1 | 1 | radiusAuthtimeout |
1.3.6.1.4.1.15.2.103.1.21 | radiusAcctTimeout | 1 | 1 | This value is used in determining the maximum time to wait for the packet (from radius accounting servers) and is multiplied by t… |
1.3.6.1.4.1.15.2.103.1.22 | radiusAcctDestination | 1 | 1 | If this object is set to acctserver(1), radius accounting is sent to the accounting server only. Setting it to both(2) causes ac… |