Network Errored Seconds caused by Long Frames received.
Total number of seconds in which a frame that is too
long (more than 8192 bytes) is received by this channel
unit on the network (T1) interface. Only frames whose
DLCI is addressed to a port on this channel unit are
counted.
Parsed from file Cisco90Series-MIB.mib
Module: Cisco90Series-MIB
Network Errored Seconds caused by Long Frames received.
Total number of seconds in which a frame that is too
long (more than 8192 bytes) is received by this channel
unit on the network (T1) interface. Only frames whose
DLCI is addressed to a port on this channel unit are
counted.
Network Errored Seconds caused by Long Frames received.
Total number of seconds in which a frame that is too
long (more than 8192 bytes) is received by this channel
unit on the network (T1) interface. Only frames whose
DLCI is addressed to a port on this channel unit are
counted.
Parsed from file CISCO-90-MIB.my.txt
Company: None
Module: Cisco90Series-MIB
Network Errored Seconds caused by Long Frames received.
Total number of seconds in which a frame that is too
long (more than 8192 bytes) is received by this channel
unit on the network (T1) interface. Only frames whose
DLCI is addressed to a port on this channel unit are
counted.
frxNetFrLgEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Network Errored Seconds caused by Long Frames received. Total number of seconds in which a frame that is too long (more than 8192 bytes) is received by this channel unit on the network (T1) interface. Only frames whose DLCI is addressed to a port on this channel unit are counted." ::= { frxChUEntry 14 }
frxNetFrLgEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Network Errored Seconds caused by Long Frames received. Total number of seconds in which a frame that is too long (more than 8192 bytes) is received by this channel unit on the network (T1) interface. Only frames whose DLCI is addressed to a port on this channel unit are counted." ::= { frxChUEntry 14 }
Vendor: Telesend Inc.
Module: Cisco90Series-MIB
[Automatically extracted from oidview.com]
frxNetFrLgEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Network Errored Seconds caused by Long Frames received. Total number of seconds in which a frame that is too long (more than 8192 bytes) is received by this channel unit on the network (T1) interface. Only frames whose DLCI is addressed to a port on this channel unit are counted." ::= { frxChUEntry 14 }
frxNetFrLgEs OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Network Errored Seconds caused by Long Frames received. Total number of seconds in which a frame that is too long (more than 8192 bytes) is received by this channel unit on the network (T1) interface. Only frames whose DLCI is addressed to a port on this channel unit are counted." ::= { frxChUEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1570.1.4.1.1.1 | frxChUIndex | 0 | 0 | Channel Unit Number. This index is used to address a specific channel unit in a bank. For D4 channel banks this number is the sa… |
| 1.3.6.1.4.1.1570.1.4.1.1.2 | frxChUType | 0 | 0 | Type of Cisco 90 Series channel unit installed. |
| 1.3.6.1.4.1.1570.1.4.1.1.3 | frxChUVersion | 0 | 0 | Cisco 90 Series channel unit version number. |
| 1.3.6.1.4.1.1570.1.4.1.1.4 | frxSigProtocol | 0 | 0 | This is the type of Local In-channel Signaling used when the subscriber is running frame relay protocol. It is provided for futur… |
| 1.3.6.1.4.1.1570.1.4.1.1.5 | frxConfigSrc | 0 | 0 | Source for configuring speed and protocol for each port. 1=Data rate and protocol set by DLCI assignment rules as reported by Ann… |
| 1.3.6.1.4.1.1570.1.4.1.1.6 | frxDLCIAdLen | 0 | 0 | The number of bytes used for the DLCI address. For future use. 1=two octets. |
| 1.3.6.1.4.1.1570.1.4.1.1.7 | frxNetInOctets | 0 | 0 | Total number of octets received by this channel unit from Frame Relay Switch (on the T1 interface) Only frames whose DLCI is addr… |
| 1.3.6.1.4.1.1570.1.4.1.1.8 | frxNetOutOctets | 0 | 0 | Total number of octets transmitted to the Frame Relay Switch (on the T1 interface) by this channel unit. Annex-D and SNMP frames … |
| 1.3.6.1.4.1.1570.1.4.1.1.9 | frxNetBadFrames | 0 | 0 | Total number of frames received on the network (T1) interface that are discarded by this channel unit. Possible reasons for disca… |
| 1.3.6.1.4.1.1570.1.4.1.1.10 | frxNetHDLCEs | 0 | 0 | Network Errored Seconds caused by HDLC aborts (7 or more ones in a row). Total number of seconds in which a frame with an HDLC ab… |
| 1.3.6.1.4.1.1570.1.4.1.1.11 | frxNetCRCEs | 0 | 0 | Network Errored Seconds caused by CRC errors. Total number of seconds in which a frame with a CRC error is received by this chann… |
| 1.3.6.1.4.1.1570.1.4.1.1.12 | frxNetLinkEs | 0 | 0 | Network Errored Seconds caused by Non-integral Bytes. Total number of seconds in which a frame with a non-integral number of byte… |
| 1.3.6.1.4.1.1570.1.4.1.1.13 | frxNetFrShEs | 0 | 0 | Network Errored Seconds caused by Short Frames received. Total number of seconds in which a frame that is too short (less than 5 … |
| 1.3.6.1.4.1.1570.1.4.1.1.15 | frxNetPPPEs | 0 | 0 | Errored seconds caused by bad RFC-1973 (PPP) header. Total number of seconds in which a frame with an invalid RFC-1973 (PPP) head… |
| 1.3.6.1.4.1.1570.1.4.1.1.16 | frxNetBufEs | 0 | 0 | Errored Seconds caused by Buffer Overflow. Total number of seconds in which a frame received by this channel unit on the network … |