Parameter Type = Non-intrusive.
This value indicates the maximum number
of CPI access device passthru sessions
that can be active simultaneously.
Parsed from file STMIB.mib.txt
Company: None
Module: STMIB
Parameter Type = Non-intrusive.
This value indicates the maximum number
of CPI access device passthru sessions
that can be active simultaneously.
Parsed from file STMIB.mib
Module: STMIB
Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
scSysNodeCpiMaxPassthruSessions OBJECT-TYPE SYNTAX INTEGER (0..4) ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Non-intrusive. This value indicates the maximum number of CPI access device passthru sessions that can be active simultaneously." DEFVAL { 4 } ::= { scSystemProfile 18 }
scSysNodeCpiMaxPassthruSessions OBJECT-TYPE SYNTAX INTEGER (0..4) ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Non-intrusive. This value indicates the maximum number of CPI access device passthru sessions that can be active simultaneously." DEFVAL { 4 } ::= { scSystemProfile 18 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.16.101.1.1.2.1 | scSysNodeUpdate | 0 | 0 | Parameter Type = Internal. This field will be set to loaded when the node is reset. |
1.3.6.1.4.1.16.101.1.1.2.2 | scSysNodeControl | 0 | 0 | Parameter Type = Immediate. Validate database will set the database version number to the value used for this revision of ST softw… |
1.3.6.1.4.1.16.101.1.1.2.3 | scSysNodeNumber | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.1.2.4 | scSysNodeDate | 0 | 0 | Parameter Type = Immediate. This will update the NCP RTC clock. The format of the string is mm/dd/yyyy. |
1.3.6.1.4.1.16.101.1.1.2.5 | scSysNodeTime | 0 | 0 | Parameter Type = Immediate. This will update the NCP RTC clock. The format of the string is hh:mm:ss. |
1.3.6.1.4.1.16.101.1.1.2.6 | scSysNodeType | 0 | 0 | Parameter Type = Intrusive. A dedicated node is dedicated to a user or the CNMS. A root node is a dedicated node that serves as an … |
1.3.6.1.4.1.16.101.1.1.2.7 | scSysNodePartitionID | 0 | 0 | Parameter Type = Intrusive. 1 is reserved for CNMS. |
1.3.6.1.4.1.16.101.1.1.2.8 | scSysNodeMasterClockPriority | 0 | 0 | Parameter Type = Immediate. |
1.3.6.1.4.1.16.101.1.1.2.9 | scSysNodeMasterClockList | 0 | 0 | Parameter Type = Immediate. Up to 16 master clock nodes, with two bytes used for each node number. |
1.3.6.1.4.1.16.101.1.1.2.10 | scSysNodeDatabaseVersion | 0 | 0 | Parameter Type = Internal. Nonvolatile RAM database version number. If this number does not match the internal version number used… |
1.3.6.1.4.1.16.101.1.1.2.11 | scSysNodeDefaultRoot | 0 | 0 | Parameter Type = Immediate. Used by the trap generator to send traps if there is no alLogNotificationList specified. |
1.3.6.1.4.1.16.101.1.1.2.12 | scSysNodeCpiProfileUpdate | 0 | 0 | Parameter Type = Internal. Indicates whether the CPI password control, the CPI session timeout time, the CPI maximum number of pas… |
1.3.6.1.4.1.16.101.1.1.2.13 | scSysNodeCpiPasswordControl | 0 | 0 | Parameter Type = Non-intrusive. Indicates whether CPI access is controlled using passwords or not. This field and the three CPI pa… |
1.3.6.1.4.1.16.101.1.1.2.14 | scSysNodeCpiPasswordLevel1 | 0 | 0 | Parameter Type = Non-intrusive. This password allows both read and write access to both local and remote nodes if password control… |
1.3.6.1.4.1.16.101.1.1.2.15 | scSysNodeCpiPasswordLevel2 | 0 | 0 | Parameter Type = Non-intrusive. This password allows both read and write access to the local node and read-only access to remote n… |
1.3.6.1.4.1.16.101.1.1.2.16 | scSysNodeCpiPasswordLevel3 | 0 | 0 | Parameter Type = Non-intrusive. This password allows read-only access to both local and remote nodes if password control is enable… |
1.3.6.1.4.1.16.101.1.1.2.17 | scSysNodeCpiSessionTimeOut | 0 | 0 | Parameter Type = Non-intrusive. CPI session will terminate when no request is made for number of minutes given by this value. For … |