Parameter Type = Non-intrusive.
Specifies how the signaling function
transport for inband subrate is
handled.
with a NO BANDWIDTH response,
so an alternative LINK path
may be found.
they are set (slower than
LINK).
Parsed from file STMIB.mib.txt
Company: None
Module: STMIB
Parameter Type = Non-intrusive.
Specifies how the signaling function
transport for inband subrate is
handled.
with a NO BANDWIDTH response,
so an alternative LINK path
may be found.
they are set (slower than
LINK).
Parsed from file STMIB.mib
Module: STMIB
Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
recfLgmPortInbandSubrate OBJECT-TYPE SYNTAX INTEGER { nack(1), pass(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Non-intrusive. Specifies how the signaling function transport for inband subrate is handled.
- reject a channel connection with a NO BANDWIDTH response, so an alternative LINK path may be found. - passes the functions the way they are set (slower than LINK)." DEFVAL { pass } ::= { recfLgmPortEntry 14 }
recfLgmPortInbandSubrate OBJECT-TYPE SYNTAX INTEGER { nack(1), pass(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Non-intrusive. Specifies how the signaling function transport for inband subrate is handled.
- reject a channel connection with a NO BANDWIDTH response, so an alternative LINK path may be found. - passes the functions the way they are set (slower than LINK)." DEFVAL { pass } ::= { recfLgmPortEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.16.101.1.2.1.14.1.1.1 | recfLgmPortAddr | 0 | 0 | Parameter Type = Internal. This is a virtual port address in type:group:port format. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.2 | recfLgmPortStartMode | 0 | 0 | Parameter Type = Intrusive. Setting to erase will fail if the LGM port has any non-removed channels. If successful, returns the in… |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.3 | recfLgmPortUpdate | 0 | 0 | Parameter Type = Internal. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.4 | recfLgmPortArq | 0 | 0 | Parameter Type = Intrusive. Specifies ARQ speed. Unit of bps, i which may not exceed the 9600. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.5 | recfLgmPortGroup | 0 | 0 | Parameter Type = Non-intrusive. Intended to force channels to use specific groups of LGM ports. There can be up to seven groups fo… |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.6 | recfLgmPortEncryption | 0 | 0 | Parameter Type = Non-intrusive. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.7 | recfLgmPortSatelliteHop | 0 | 0 | Parameter Type = Non-intrusive. Specifies the number of satellite hops per end - to - end point connection. Earth station - satell… |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.8 | recfLgmPortSyncChar | 0 | 0 | Parameter Type = Intrusive. Specifies number of sync characters per frame. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.9 | recfLgmPortSyncLevel | 0 | 0 | Parameter Type = Intrusive. Synchronization level parameter. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.10 | recfLgmPortOosTimer | 0 | 0 | Parameter Type = Non-intrusive. In units of seconds. The Out-Of-Service state is entered if this time is exceeded. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.11 | recfLgmPortPartitionID | 0 | 0 | Parameter Type = Intrusive. Used by security server to enforce shared node. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.12 | recfLgmPortBitMode | 0 | 0 | Parameter Type = Intrusive. Defines the bit mode of this port. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.13 | recfLgmPortInbandSuperrate | 0 | 0 | Parameter Type = Non-intrusive. Specifies how the signaling function transport for inband superrate is handled. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.15 | recfLgmPortOutbandSuperrate | 0 | 0 | Parameter Type = Non-intrusive. Specifies how the signaling function transport for outband superrate is handled. |
1.3.6.1.4.1.16.101.1.2.1.14.1.1.16 | recfLgmPortOutbandSubrate | 0 | 0 | Parameter Type = Non-intrusive. Specifies how the signaling function transport for outband subrate is handled. |