Parameter Type = Intrusive.
Allows the user to specify a specific
application type to be allocated to
this ASM module. Ports with other
application types will not be able to
be allocated on this module.
If the subtype of this particular ASM
module does not support the application
type specified here, then the module
will still come up, but no ports will
be able to be allocated. If this
occurs, then the restAsmModApplTable
section of the MIB will indicate that
no applications are available.
If a setting of mixed is specified,
then allocation of a port with a
particular application will only be
restricited by the subtype of the
module.
Parsed from file STMIB.mib.txt
Company: None
Module: STMIB
Parameter Type = Intrusive.
Allows the user to specify a specific
application type to be allocated to
this ASM module. Ports with other
application types will not be able to
be allocated on this module.
If the subtype of this particular ASM
module does not support the application
type specified here, then the module
will still come up, but no ports will
be able to be allocated. If this
occurs, then the restAsmModApplTable
section of the MIB will indicate that
no applications are available.
If a setting of mixed is specified,
then allocation of a port with a
particular application will only be
restricited by the subtype of the
module.
Parsed from file STMIB.mib
Module: STMIB
Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
recfModuleAsmApplType OBJECT-TYPE SYNTAX INTEGER { x50(1), celp-atc(2), adpcm(3), mixed(255) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Intrusive. Allows the user to specify a specific application type to be allocated to this ASM module. Ports with other application types will not be able to be allocated on this module. If the subtype of this particular ASM module does not support the application type specified here, then the module will still come up, but no ports will be able to be allocated. If this occurs, then the restAsmModApplTable section of the MIB will indicate that no applications are available. If a setting of mixed is specified, then allocation of a port with a particular application will only be restricited by the subtype of the module." DEFVAL { mixed } ::= { recfModuleAsmEntry 5 }
recfModuleAsmApplType OBJECT-TYPE SYNTAX INTEGER { x50(1), celp-atc(2), adpcm(3), mixed(255) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Intrusive. Allows the user to specify a specific application type to be allocated to this ASM module. Ports with other application types will not be able to be allocated on this module. If the subtype of this particular ASM module does not support the application type specified here, then the module will still come up, but no ports will be able to be allocated. If this occurs, then the restAsmModApplTable section of the MIB will indicate that no applications are available. If a setting of mixed is specified, then allocation of a port with a particular application will only be restricited by the subtype of the module." DEFVAL { mixed } ::= { recfModuleAsmEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16.101.1.2.1.5.4.1.1 | recfModuleAsmAddr | 0 | 0 | Parameter Type = Internal. |
| 1.3.6.1.4.1.16.101.1.2.1.5.4.1.2 | recfModuleAsmPartition | 0 | 0 | Parameter Type = Non-intrusive. Each two bytes is the partition ID of a physical engine on the module. Partition 1 is for CNMS. Pa… |
| 1.3.6.1.4.1.16.101.1.2.1.5.4.1.3 | recfModuleAsmCelpPartition | 0 | 0 | Parameter Type = Non-intrusive. Each two bytes is the partition ID of a CELP license on the module. Partition 1 is for CNMS. Parti… |
| 1.3.6.1.4.1.16.101.1.2.1.5.4.1.4 | recfModuleAsmMinCelpPorts | 0 | 0 | Parameter Type = Non-intrusive. Defines the number of the ASM ports that cannot be used for anything else but CELP application. |