Parameter Type = Intrusive.
Parsed from file STMIB.mib.txt
Company: None
Module: STMIB
Parameter Type = Intrusive.
Parsed from file STMIB.mib
Module: STMIB
Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
recfSdmPortSatelliteBuffer OBJECT-TYPE SYNTAX INTEGER { enable(15), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Intrusive." DEFVAL { disable } ::= { recfSdmPortEntry 18 }
recfSdmPortSatelliteBuffer OBJECT-TYPE SYNTAX INTEGER { enable(15), disable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Intrusive." DEFVAL { disable } ::= { recfSdmPortEntry 18 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.16.101.1.2.1.6.3.1.1 | recfSdmPortAddr | 0 | 0 | Parameter Type = Internal. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.2 | recfSdmPortStartMode | 0 | 0 | Parameter Type = Intrusive. Setting to erase will fail if the port has any unremoved INLs or channels that are not disconnected. O… |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.3 | recfSdmPortUpdate | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.4 | recfSdmPortSpeed | 0 | 0 | Parameter Type = Intrusive. s is for subrate speeds. b is for bundle speeds (n x 64K). sf is for stuffed speeds (n x 56K). bsf is f… |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.5 | recfSdmPortInterface | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.6 | recfSdmPortTxClockSource | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.7 | recfSdmPortBitMode | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.8 | recfSdmPortOOSOper | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.9 | recfSdmPortGen | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.10 | recfSdmPortPolarity | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.11 | recfSdmPortType | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.12 | recfSdmPortINLNumber | 0 | 0 | Parameter Type = Intrusive. Applicable only if recfSdmPortType is set to inl. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.13 | recfSdmDeviceType | 0 | 0 | Parameter Type = Intrusive. This field indicates the type of device connected to the port. Values 1-10 and 255 are reserved by ST-5… |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.14 | recfSdmPortPartitionID | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.15 | recfSdmPortFunctions | 0 | 0 | Parameter Type = Intrusive. The four least significant bits represent whether the function mapped to that bit should be forced or … |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.16 | recfSdmPortContentionSet | 0 | 0 | Parameter Type = Intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.17 | recfSdmPortLoopbackSupport | 0 | 0 | Parameter Type = Intrusive. Indicates whether the SDM port should support the signals for LL, RL, and TM. If a signal is supported… |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.19 | recfSdmPortFailToggleRequest | 0 | 0 | Parameter Type = Non-intrusive. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.20 | recfSdmPortKGPolarity | 0 | 0 | Parameter Type = Intrusive. Specifies the polarity of KG-resync signal. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.21 | recfSdmPortKGSignalType | 0 | 0 | Parameter Type = Intrusive. Specifies the type of of KG-resync signal. |
1.3.6.1.4.1.16.101.1.2.1.6.3.1.22 | recfSdmPortKGMode | 0 | 0 | Parameter Type = Intrusive. Specifies the KG-resync mode. |