Parameter Type = Intrusive.
Setting to erase will fail if the INL has
not been removed. Otherwise, it will
erase the INL configuration, and set the
INL number field in the port or bundle
configuration to zero.
Parsed from file STMIB.mib.txt
Company: None
Module: STMIB
Parameter Type = Intrusive.
Setting to erase will fail if the INL has
not been removed. Otherwise, it will
erase the INL configuration, and set the
INL number field in the port or bundle
configuration to zero.
Parsed from file STMIB.mib
Module: STMIB
Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
recfINLStartMode OBJECT-TYPE SYNTAX INTEGER { automatic(1), off(2), erase(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Intrusive. Setting to erase will fail if the INL has not been removed. Otherwise, it will erase the INL configuration, and set the INL number field in the port or bundle configuration to zero." DEFVAL { off } ::= { recfINLEntry 3 }
recfINLStartMode OBJECT-TYPE SYNTAX INTEGER { automatic(1), off(2), erase(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Parameter Type = Intrusive. Setting to erase will fail if the INL has not been removed. Otherwise, it will erase the INL configuration, and set the INL number field in the port or bundle configuration to zero." DEFVAL { off } ::= { recfINLEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.16.101.1.2.1.8.1.1 | recfINLNumber | 0 | 0 | Parameter Type = Internal. |
1.3.6.1.4.1.16.101.1.2.1.8.1.2 | recfINLAddr | 0 | 0 | Parameter Type = Intrusive. Setting this field will set the INL number field in the port or bundle configuration to this INL's num… |
1.3.6.1.4.1.16.101.1.2.1.8.1.4 | recfINLUpdate | 0 | 0 | Parameter Type = Internal. |
1.3.6.1.4.1.16.101.1.2.1.8.1.5 | recfINLArqCir | 0 | 0 | Parameter Type = Intrusive. Unit of bps. |
1.3.6.1.4.1.16.101.1.2.1.8.1.6 | recfINLMaxPacketDS0 | 0 | 0 | Parameter Type = Intrusive. Maximum packet bandwidth, in units of DS0. (INL Bandwidth - recfMaxPacketDS0) is the guaranteed TDM ba… |
1.3.6.1.4.1.16.101.1.2.1.8.1.7 | recfINLPacketCirOccupy | 0 | 0 | Parameter Type = Intrusive. This number represents the CIR occupancy percentage (x) of the packet band bandwidth. The INL bandwidt… |
1.3.6.1.4.1.16.101.1.2.1.8.1.8 | recfINLMaxTDMDS0 | 0 | 0 | Parameter Type = Intrusive. Maximum TDM bandwidth, in units of DS0. (INL Bandwidth - recfMaxTDMDS0) is the guaranteed packet bandw… |
1.3.6.1.4.1.16.101.1.2.1.8.1.9 | recfINLGroup | 0 | 0 | Parameter Type = Non-intrusive. Up to seven groups for each INL. Bit map bits 1 (lsb) to 7 indicates the group(s) of the INL. |
1.3.6.1.4.1.16.101.1.2.1.8.1.10 | recfINLCost | 0 | 0 | Parameter Type = Non-intrusive. Assigned by user. |
1.3.6.1.4.1.16.101.1.2.1.8.1.11 | recfINLEncryption | 0 | 0 | Parameter Type = Non-intrusive. |
1.3.6.1.4.1.16.101.1.2.1.8.1.12 | recfINLSatelliteHop | 0 | 0 | Parameter Type = Non-intrusive. |
1.3.6.1.4.1.16.101.1.2.1.8.1.13 | recfINLOOSTimer | 0 | 0 | Parameter Type = Non-intrusive. In units of seconds. To disqualify a INL beyond. |
1.3.6.1.4.1.16.101.1.2.1.8.1.14 | recfINLOrig | 0 | 0 | Parameter Type = Internal. For EMS usage. |
1.3.6.1.4.1.16.101.1.2.1.8.1.15 | recfINLRemoteNodeID | 0 | 0 | Parameter Type = Intrusive. 0 means don't care. |
1.3.6.1.4.1.16.101.1.2.1.8.1.16 | recfINLRemoteINLID | 0 | 0 | Parameter Type = Intrusive. INL number of remote side. 0 means don't care. |
1.3.6.1.4.1.16.101.1.2.1.8.1.17 | recfINLPartitionID | 0 | 0 | Parameter Type = Internal. Used by security server to enforce shared node. |
1.3.6.1.4.1.16.101.1.2.1.8.1.18 | recfINLKGMode | 0 | 0 | Parameter Type = Internal. Used by Link Maintenance to take action in KG-resync mode. |