Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
restNodeEntry OBJECT IDENTIFIER ::= { restNode 1 }
restNodeEntry OBJECT IDENTIFIER ::= { restNode 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16.101.1.2.2.1.1.1 | restNodeDiagnostics | 1 | 1 | updateNest will update the node with the new nest number. If the new nest number is greater than the old number, then the new nes… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.2 | restNodeStatus | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.3 | restNodeCondition | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.4 | restNodeSWRevision | 1 | 1 | Version number of the NCP software that is currently running. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.5 | restNodeMIBRevision | 1 | 1 | Version number of the MIB schema that the NCP is currently using. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.6 | restNodeUpTime | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.7 | restNodeErrorMinutes | 1 | 1 | Count of the error minutes in the bus for the past 24 hours. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.8 | restNodeNumOfNest | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.9 | restNodePktBandBWAvail | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.10 | restNodePktBandBWMax | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.11 | restNodeMasterClockPriority | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.12 | restNodeMasterClockMsg | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.13 | restNodeClockTableIndex | 1 | 1 | Indicates which clock in the clock fallback table is in use. If the clock status is slave holdover, then this field may return zer… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.14 | restNodeClockStatus | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.15 | restNodeClockSubStatus | 1 | 1 | These are the substates associated with slaveHoldover state. If the clock status is not slaveHoldover, then notApplicable will be… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.16 | restNodeClockSourceType | 1 | 1 | Type of the clock currently in use. If the clock status is slave holdover, then this field may return not applicable. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.17 | restNodeClockSourcePort | 1 | 1 | Source port address of the clock currently in use, if the clock type is portRxInd, portRxDep, or portTx. If the clock type is a di… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.18 | restNodeClockSourcePriority | 1 | 1 | Priority of the clock currently in use. If the clock status is slave holdover, then this field may return zero. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.19 | restNodeClockSourceQuality | 1 | 1 | Quality of the clock currently in use. If the clock status is slave holdover, then this field may return not applicable. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.20 | restNodeClockQualifierStatus | 1 | 1 | None |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.21 | restNodeTestGenStatus | 1 | 1 | Current status of the test generator for TDM nDS0 channels. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.22 | restNodeTestGenType | 1 | 1 | Current type of the test generator for TDM nDS0 channels. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.23 | restNodeTestGenTDMChannel | 1 | 1 | Current channel address that the TDM test generator is being used on. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.24 | restNodeAlarmRelayStatus | 1 | 1 | Indicates whether the alarm relay port is programmed to be used or not. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.25 | restNodeAlarmRelaySubStatus | 1 | 1 | Indicates the status of the major alarm relay (first value) and the minor alarm relay (second value). This field is only valid if… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.26 | restNodeCpiStatus | 1 | 1 | Indicates the current status of the CPI port. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.27 | restNodeModemStatus | 1 | 1 | Indicates the current status of the modem port. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.28 | restNodeSoftloadStatus | 1 | 1 | Indicates the softload status. 'Idle' means that no softload has been run yet since the node went online. 'Softloading' indicates … |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.29 | restNodeSoftloadTotal | 1 | 1 | Total number of bytes to be softloaded. If no softloading is in progress, then this value is zero. |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.30 | restNodeSoftloadSize | 1 | 1 | Number of bytes that have been softloaded. Divide this by the value of restNodeSoftloadTotal to determine the completion percentag… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.31 | restNodeSoftloadSoftwareType | 1 | 1 | Indicates type of software being transferred if a softload is in progress. notApplicable will be returned if no softload is in pro… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.32 | restNodeUploadStatus | 1 | 1 | Each upload client, which is used to upload files to SNMS or to other nodes, is represented by one octet. There are a maximum of … |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.33 | restNodeUploadTotal | 1 | 1 | Total number of bytes to be uploaded to ech of up to eight clients. Each client uses four bytes for its value. If no uploading is… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.34 | restNodeUploadSize | 1 | 1 | Number of bytes that have been uploaded to each of up to eight clients. Each client uses four bytes for its value. Divide each cli… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.35 | restNodeUploadClientID | 1 | 1 | Specifies the node numbers of the eight clients that this node is serving during an upload. Each client is identified by two byte… |
| 1.3.6.1.4.1.16.101.1.2.2.1.1.36 | restNodeTotalDsmCallsPerSecond | 1 | 1 | This is the total amount of calls per second (in units of 0.01 calls per second) allocated for DSM in this node. |