INTRODUCED 2.0.1
If a frame switch is currently occurring on
this SAF, then this attribute indicates the
location of that frame switch. The value is
a sum with an initial value of zero. For
each possible frame switch location L in
the range 1 to 2, the value 2 raised to
(L - 1) is added to the sum if there is a
frame switch in that location. The possible
frame switch locations are the following:
L location
1 add bus
2 drop bus
Thus, if there is a frame switch on the add
bus, the value returned would be 1. If
there is a frame switch on the drop bus,
the value returned would be 2. If there is
a frame switch on both the add and the drop
busses, then the value returned would be 3.
If there is no frame switch occurring, then
the value returned will be zero (0),
indicating no frame switch locations.
Parsed from file STMIB.mib.txt
Company: None
Module: STMIB
INTRODUCED 2.0.1
If a frame switch is currently occurring on
this SAF, then this attribute indicates the
location of that frame switch. The value is
a sum with an initial value of zero. For
each possible frame switch location L in
the range 1 to 2, the value 2 raised to
(L - 1) is added to the sum if there is a
frame switch in that location. The possible
frame switch locations are the following:
L location
1 add bus
2 drop bus
Thus, if there is a frame switch on the add
bus, the value returned would be 1. If
there is a frame switch on the drop bus,
the value returned would be 2. If there is
a frame switch on both the add and the drop
busses, then the value returned would be 3.
If there is no frame switch occurring, then
the value returned will be zero (0),
indicating no frame switch locations.
Parsed from file STMIB.mib
Module: STMIB
Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
restSafFrameSwitchLocation OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "INTRODUCED 2.0.1 If a frame switch is currently occurring on this SAF, then this attribute indicates the location of that frame switch. The value is a sum with an initial value of zero. For each possible frame switch location L in the range 1 to 2, the value 2 raised to (L - 1) is added to the sum if there is a frame switch in that location. The possible frame switch locations are the following: L location 1 add bus 2 drop bus Thus, if there is a frame switch on the add bus, the value returned would be 1. If there is a frame switch on the drop bus, the value returned would be 2. If there is a frame switch on both the add and the drop busses, then the value returned would be 3. If there is no frame switch occurring, then the value returned will be zero (0), indicating no frame switch locations." ::= { restSafEntry 14 }
restSafFrameSwitchLocation OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "INTRODUCED 2.0.1 If a frame switch is currently occurring on this SAF, then this attribute indicates the location of that frame switch. The value is a sum with an initial value of zero. For each possible frame switch location L in the range 1 to 2, the value 2 raised to (L - 1) is added to the sum if there is a frame switch in that location. The possible frame switch locations are the following: L location 1 add bus 2 drop bus Thus, if there is a frame switch on the add bus, the value returned would be 1. If there is a frame switch on the drop bus, the value returned would be 2. If there is a frame switch on both the add and the drop busses, then the value returned would be 3. If there is no frame switch occurring, then the value returned will be zero (0), indicating no frame switch locations." ::= { restSafEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.16.101.1.2.2.15.1.1.1 | restSafAddr | 0 | 0 | SAF address. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.2 | restSafStatus | 0 | 0 | Indicates whether the SAF is synchronized or not, or whether the SAF is currently in the middle of a frame switch. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.3 | restSafSubStatus | 0 | 0 | If the SAF status is out of sync, then this attribute indicates if it is due to an error or not. If the SAF is in sync or in the m… |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.4 | restSafRemoteNode | 0 | 0 | The node in which the remote side of this SAF connection resides. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.5 | restSafRemoteAddr | 0 | 0 | The address of the remote side of this SAF connection. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.6 | restSafInlNumber | 0 | 0 | The local INL number that this SAF is located on. For a local SAF, this attribute shall return 32. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.7 | restSafBandwidthAvail | 0 | 0 | The available (unused) bandwidth in this SAF according to the NCP. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.8 | restSafNumChannels | 0 | 0 | The number of subrate channels currently connected through this SAF according to the NCP. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.9 | restSafHWPhasorStatus | 0 | 0 | DEPRECATED 2.0.1 This attribute will always return x8080, which means not applicable. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.10 | restSafSWPhasorStatus | 0 | 0 | DEPRECATED 2.0.1 This attribute will always return x8080, which means not applicable. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.11 | restSafModNumChannels | 0 | 0 | INTRODUCED 2.0.1 The number of subrate channels currently connected through this SAF according to the module that this endpoint of… |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.12 | restSafModBandwidthAvail | 0 | 0 | INTRODUCED 2.0.1 The available (unused) bandwidth in this SAF according to the module that this endpoint of the SAF resides on. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.13 | restSafDiagnostics | 0 | 0 | INTRODUCED 2.0.1 clearStats will clear the counters in this MIB section. setLoopback will initiate a loopback on this SAF. This wil… |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.15 | restSafFrameSwitchIndicator | 0 | 0 | INTRODUCED 2.0.1 Indicates if a frame switch is needed on this SAF or not. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.16 | restSafRemoteStatus | 0 | 0 | INTRODUCED 2.0.1 The view of the remote endpoint of SAF from the module that this endpoint of the SAF resides on. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.17 | restSafSyncErrors | 0 | 0 | INTRODUCED 2.0.1 The number of sync errors on this SAF. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.18 | restSafOosErrors | 0 | 0 | INTRODUCED 2.0.1 The number of OOS errors on this SAF. |
1.3.6.1.4.1.16.101.1.2.2.15.1.1.19 | restSafPhasorStatus | 0 | 0 | INTRODUCED 2.0.1 The status of the phasor for this SAF. The first octet is used to indicate transmit phasor status. The bits are i… |