RF Frequency.
The frequencies are:
2.4 radios:24150,24175,24200,24225,24250,24275,24300,24325,24350,24375,
24400,24425,24450,24475,24500,24525,24550,24575.
4.9 radios:4920,4940,4960,4980,5040,5060,5080.
5.1 radios:5175,5180,5185,5190,5195,5200,5205,5210,5215,5220,5225,5230,5240,
5245,5250,5255,5260,5265,5270,5275,5280,5285,5290,5295,5300,5305,
5310,5315,5320,5325.
5.2 radios:5275,5280,5285,5290,5295,5300,5305,5310,5315,5320,5325.
5.4 radios:5495,5500,5505,5510,5515,5520,5525,5530,5535,5540,5545,5550,5555,5560,
5565,5570,5575,5580,5585,5590,5595,5600,5605,5610,5615,5620,5625,5630,
5635,5640,5645,5650,5655,5660,5665,5670,5675,5680,5685,5690,5695,5700,5705
5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805.
5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775,
5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840.
5.8 radios:5860,5865,5870,5875,5880,5885,5890,5895,5900,5905,5910.
900 radios:9060,9070,9080,9090,9100,9110,9120,9130,9140,9150,9160,9170,9180,9190,9200,9220,9230,9240.
0: wired.
Parsed from file WHISP-APS-MIB.mib
Module: WHISP-APS-MIB
Vendor: Motorola
Module: WHISP-APS-MIB
[Automatically extracted from oidview.com]
rfFreqCarrier OBJECT-TYPE SYNTAX INTEGER {wired(0)} MAX-ACCESS read-write STATUS current DESCRIPTION "RF Frequency. The frequencies are: 2.4 radios:24150,24175,24200,24225,24250,24275,24300,24325,24350,24375, 24400,24425,24450,24475,24500,24525,24550,24575. 4.9 radios:4920,4940,4960,4980,5040,5060,5080. 5.1 radios:5175,5180,5185,5190,5195,5200,5205,5210,5215,5220,5225,5230,5240, 5245,5250,5255,5260,5265,5270,5275,5280,5285,5290,5295,5300,5305, 5310,5315,5320,5325. 5.2 radios:5275,5280,5285,5290,5295,5300,5305,5310,5315,5320,5325. 5.4 radios:5495,5500,5505,5510,5515,5520,5525,5530,5535,5540,5545,5550,5555,5560, 5565,5570,5575,5580,5585,5590,5595,5600,5605,5610,5615,5620,5625,5630, 5635,5640,5645,5650,5655,5660,5665,5670,5675,5680,5685,5690,5695,5700,5705 5.7 radios:5745,5750,5755,5760,5765,5770,5775,5780,5785,5790,5795,5800,5805. 5.7 radios with ISM enabled :5735,5740,5745,5750,5755,5760,5765,5770,5775, 5780,5785,5790,5795,5800,5805,5810,5815,5820,5825,5830,5835,5840. 5.8 radios:5860,5865,5870,5875,5880,5885,5890,5895,5900,5905,5910. 900 radios:9060,9070,9080,9090,9100,9110,9120,9130,9140,9150,9160,9170,9180,9190,9200,9220,9230,9240. 0: wired." ::= {whispApsConfig 2}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.161.19.3.1.1.1 | gpsInput | 0 | 0 | None |
1.3.6.1.4.1.161.19.3.1.1.3 | apLinkSpeed | 0 | 0 | The variable is deprecated. |
1.3.6.1.4.1.161.19.3.1.1.4 | dwnLnkData | 0 | 0 | This is the percentage of frame data space allocated for downlink |
1.3.6.1.4.1.161.19.3.1.1.5 | highPriorityUpLnkPct | 0 | 0 | Percentage of uplink slots for high priority data. |
1.3.6.1.4.1.161.19.3.1.1.6 | numUAckSlots | 0 | 0 | Total number of upstream ack slots. |
1.3.6.1.4.1.161.19.3.1.1.7 | uAcksReservHigh | 0 | 0 | Total number of upstream high priority ack slots |
1.3.6.1.4.1.161.19.3.1.1.8 | numDAckSlots | 0 | 0 | Total number of downstream ack slots. |
1.3.6.1.4.1.161.19.3.1.1.9 | dAcksReservHigh | 0 | 0 | Total number of high priority downstream ack slots. |
1.3.6.1.4.1.161.19.3.1.1.10 | numCtlSlots | 0 | 0 | Total number of upstream control (contention) slots. |
1.3.6.1.4.1.161.19.3.1.1.11 | numCtlSlotsReserveHigh | 0 | 0 | Total number of High priority upstream control (contention) slots. |
1.3.6.1.4.1.161.19.3.1.1.12 | upLnkDataRate | 0 | 0 | Sustained uplink bandwidth cap. |
1.3.6.1.4.1.161.19.3.1.1.13 | upLnkLimit | 0 | 0 | Burst uplink bandwidth cap. |
1.3.6.1.4.1.161.19.3.1.1.14 | dwnLnkDataRate | 0 | 0 | Sustained downlink bandwidth cap. |
1.3.6.1.4.1.161.19.3.1.1.15 | dwnLnkLimit | 0 | 0 | Burst downlink bandwidth cap. |
1.3.6.1.4.1.161.19.3.1.1.16 | sectorID | 0 | 0 | Advertise sector number for an AP. |
1.3.6.1.4.1.161.19.3.1.1.17 | maxRange | 0 | 0 | Access point max range. |
1.3.6.1.4.1.161.19.3.1.1.18 | airLinkSecurity | 0 | 0 | Air Link Security. desEnhancedAndAuthentication(2) and authenticationIfAvailable(3) are only for APAS. |
1.3.6.1.4.1.161.19.3.1.1.19 | berMode | 0 | 0 | AP backgroup BER mode. |
1.3.6.1.4.1.161.19.3.1.1.20 | asIP1 | 0 | 0 | Authentication Sever 1 IP. |
1.3.6.1.4.1.161.19.3.1.1.21 | asIP2 | 0 | 0 | Authentication Sever 2 IP. |
1.3.6.1.4.1.161.19.3.1.1.22 | asIP3 | 0 | 0 | Authentication Sever 3 IP. |
1.3.6.1.4.1.161.19.3.1.1.23 | lanIp | 0 | 0 | LAN IP. |
1.3.6.1.4.1.161.19.3.1.1.24 | lanMask | 0 | 0 | LAN subnet mask. |
1.3.6.1.4.1.161.19.3.1.1.25 | defaultGw | 0 | 0 | Default gateway |
1.3.6.1.4.1.161.19.3.1.1.26 | privateIp | 0 | 0 | Private IP. |
1.3.6.1.4.1.161.19.3.1.1.27 | gpsTrap | 0 | 0 | Variable to enable/disable GPS sync/out-sync traps. |
1.3.6.1.4.1.161.19.3.1.1.28 | regTrap | 0 | 0 | Variable to enable/disable registration complete/lost traps. |
1.3.6.1.4.1.161.19.3.1.1.29 | txSpreading | 0 | 0 | Variable to enable/disable Transmit Frame Spreading. |
1.3.6.1.4.1.161.19.3.1.1.30 | apBeaconInfo | 0 | 0 | Variable to enable/disable displaying AP beacon info through AP eval. |
1.3.6.1.4.1.161.19.3.1.1.31 | authMode | 0 | 0 | Variable to enable/disable authentication. The authentication optional mode is for APs only. This variable can only be set when … |
1.3.6.1.4.1.161.19.3.1.1.32 | authKey | 0 | 0 | Authentication key. It should be 32 character long. For Backhaul timing master only. |
1.3.6.1.4.1.161.19.3.1.1.33 | encryptionMode | 0 | 0 | Variable to enable/disable encryption. |
1.3.6.1.4.1.161.19.3.1.1.34 | ntpServerIp | 0 | 0 | IP address for NTP server. |
1.3.6.1.4.1.161.19.3.1.1.35 | broadcastRetryCount | 0 | 0 | None |
1.3.6.1.4.1.161.19.3.1.1.36 | encryptDwBroadcast | 0 | 0 | To enable or disable Encrypted Downlink Broadcast. For APs. |
1.3.6.1.4.1.161.19.3.1.1.37 | updateAppAddress | 0 | 0 | Update Application Address. |
1.3.6.1.4.1.161.19.3.1.1.38 | dfsConfig | 0 | 0 | To enable or disable Dynamic Frequency Shifting. For 5.7 GHz radios. |
1.3.6.1.4.1.161.19.3.1.1.39 | vlanEnable | 0 | 0 | To enable or disable VLAN. |
1.3.6.1.4.1.161.19.3.1.1.40 | configSource | 0 | 0 | To configure CIR, MIR and VLAN through SM or BAM. |
1.3.6.1.4.1.161.19.3.1.1.41 | apTwoXRate | 0 | 0 | To enable or disable double rate. |
1.3.6.1.4.1.161.19.3.1.1.42 | numCtlSlotsHW | 0 | 0 | Total number of control slots for HW Scheduling mode. |