Current operational state of an interface.
0 = Idle
1 = In Session
2 = Clearing
3 = Re-registration downlink reset
4 = Authentication Challenge
5 = Registering
6 = Not in use
Parsed from file WHISP-APS-MIB.mib
Module: WHISP-APS-MIB
Vendor: Motorola
Module: WHISP-APS-MIB
[Automatically extracted from oidview.com]
linkSessState OBJECT-TYPE SYNTAX INTEGER{ idle(0), inSession(1), clearing(2), reRegDnRst(3), authChal(4), registering(5), notInUse(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current operational state of an interface. 0 = Idle 1 = In Session 2 = Clearing 3 = Re-registration downlink reset 4 = Authentication Challenge 5 = Registering 6 = Not in use" ::= {whispLinkEntry 19}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.161.19.3.1.4.1.1 | linkLUID | 0 | 0 | LUID number. |
1.3.6.1.4.1.161.19.3.1.4.1.2 | linkDescr | 0 | 0 | A textual string containing information about the unit. This string should include the name of the manufacturer, the product nam… |
1.3.6.1.4.1.161.19.3.1.4.1.3 | linkPhysAddress | 0 | 0 | Physical Address of the unit. |
1.3.6.1.4.1.161.19.3.1.4.1.4 | linkMtu | 0 | 0 | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used … |
1.3.6.1.4.1.161.19.3.1.4.1.5 | linkSpeed | 0 | 0 | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those … |
1.3.6.1.4.1.161.19.3.1.4.1.6 | linkOperStatus | 0 | 0 | This variable is not used. |
1.3.6.1.4.1.161.19.3.1.4.1.7 | linkInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. |
1.3.6.1.4.1.161.19.3.1.4.1.8 | linkInUcastPkts | 0 | 0 | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
1.3.6.1.4.1.161.19.3.1.4.1.9 | linkInNUcastPkts | 0 | 0 | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
1.3.6.1.4.1.161.19.3.1.4.1.10 | linkInDiscards | 0 | 0 | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being de… |
1.3.6.1.4.1.161.19.3.1.4.1.11 | linkInError | 0 | 0 | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
1.3.6.1.4.1.161.19.3.1.4.1.12 | linkInUnknownProtos | 0 | 0 | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
1.3.6.1.4.1.161.19.3.1.4.1.13 | linkOutOctets | 0 | 0 | The total number of octets transmitted out of the interface, including framing characters. |
1.3.6.1.4.1.161.19.3.1.4.1.14 | linkOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those… |
1.3.6.1.4.1.161.19.3.1.4.1.15 | linkOutNUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast … |
1.3.6.1.4.1.161.19.3.1.4.1.16 | linkOutDiscards | 0 | 0 | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being t… |
1.3.6.1.4.1.161.19.3.1.4.1.17 | linkOutError | 0 | 0 | The number of outbound packets that could not be transmitted because of errors. |
1.3.6.1.4.1.161.19.3.1.4.1.18 | linkOutQLen | 0 | 0 | Number of packets in output packet queue. |
1.3.6.1.4.1.161.19.3.1.4.1.20 | linkESN | 0 | 0 | Link Electronic serial numbe. It is MAC address. |
1.3.6.1.4.1.161.19.3.1.4.1.21 | linkRSSI | 0 | 0 | The average RSSI reading of all packets received from an SM. |
1.3.6.1.4.1.161.19.3.1.4.1.22 | linkAveJitter | 0 | 0 | The average Jitter reading of all packets received from an SM. |
1.3.6.1.4.1.161.19.3.1.4.1.23 | linkLastJitter | 0 | 0 | Last jitter value. |
1.3.6.1.4.1.161.19.3.1.4.1.24 | linkAirDelay | 0 | 0 | The current air delay measured between the AP and SM. |
1.3.6.1.4.1.161.19.3.1.4.1.25 | linkRegCount | 0 | 0 | The number of times an SM has registered to an AP. |
1.3.6.1.4.1.161.19.3.1.4.1.26 | linkReRegCount | 0 | 0 | The number of times an SM has tried to register with the AP while it still has an active session with the AP. |
1.3.6.1.4.1.161.19.3.1.4.1.27 | linkTimeOut | 0 | 0 | Link time out. |
1.3.6.1.4.1.161.19.3.1.4.1.28 | linkLastRSSI | 0 | 0 | The last RSSI reading of all packets received from an SM. |
1.3.6.1.4.1.161.19.3.1.4.1.29 | sessionCount | 0 | 0 | How many times has this mac been in/out of session. |
1.3.6.1.4.1.161.19.3.1.4.1.30 | softwareVersion | 0 | 0 | The software version of registered SM. |
1.3.6.1.4.1.161.19.3.1.4.1.31 | softwareBootVersion | 0 | 0 | The software boot version of registered SM. |
1.3.6.1.4.1.161.19.3.1.4.1.32 | fpgaVersion | 0 | 0 | The FPGA version of registered SM. |
1.3.6.1.4.1.161.19.3.1.4.1.33 | linkSiteName | 0 | 0 | The site name of the registered SM. |
1.3.6.1.4.1.161.19.3.1.4.1.34 | avgPowerLevel | 0 | 0 | The everage power level of registered SM. |
1.3.6.1.4.1.161.19.3.1.4.1.35 | lastPowerLevel | 0 | 0 | The last power level of registered SM. |
1.3.6.1.4.1.161.19.3.1.4.1.36 | sesDownLinkRate | 0 | 0 | Down link rate. |
1.3.6.1.4.1.161.19.3.1.4.1.37 | sesDownLinkLimit | 0 | 0 | Down link limit. |
1.3.6.1.4.1.161.19.3.1.4.1.38 | sesUpLinkRate | 0 | 0 | Uplink rate. |
1.3.6.1.4.1.161.19.3.1.4.1.39 | sesUpLinkLimit | 0 | 0 | Uplink limit. |
1.3.6.1.4.1.161.19.3.1.4.1.40 | adaptRate | 0 | 0 | Adapt rate of registered SM. |
1.3.6.1.4.1.161.19.3.1.4.1.41 | sesLoUpCIR | 0 | 0 | Low priority up link CIR. |
1.3.6.1.4.1.161.19.3.1.4.1.42 | sesLoDownCIR | 0 | 0 | Low priority down link CIR. |
1.3.6.1.4.1.161.19.3.1.4.1.43 | sesHiUpCIR | 0 | 0 | High priority up link CIR. |
1.3.6.1.4.1.161.19.3.1.4.1.44 | sesHiDownCIR | 0 | 0 | High priority down link CIR. |