Reference record for OID 1.3.6.1.4.1.164.3.1.2.2.8.3.1.1

parent

1.3.6.1.4.1.164.3.1.2.2.8.3.1 (agnCnfgAlrReportEntry)

node code

1

node name

agnCnfgAlrReportType

dot oid

1.3.6.1.4.1.164.3.1.2.2.8.3.1.1

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radWan(3) wanGen(1) agnWanGen(2) cnfgAgnGen(2) agnCnfgAlarm(8) agnCnfgAlrReportTable(3) agnCnfgAlrReportEntry(1) agnCnfgAlrReportType(1)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radWan(3) wanGen(1) agnWanGen(2) cnfgAgnGen(2) agnCnfgAlarm(8) agnCnfgAlrReportTable(3) agnCnfgAlrReportEntry(1) agnCnfgAlrReportType(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radWan(3) wanGen(1) agnWanGen(2) cnfgAgnGen(2) agnCnfgAlarm(8) agnCnfgAlrReportTable(3) agnCnfgAlrReportEntry(1) agnCnfgAlrReportType(1)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radWan(3) wanGen(1) agnWanGen(2) cnfgAgnGen(2) agnCnfgAlarm(8) agnCnfgAlrReportTable(3) agnCnfgAlrReportEntry(1) agnCnfgAlrReportType(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radWan(3) wanGen(1) agnWanGen(2) cnfgAgnGen(2) agnCnfgAlarm(8) agnCnfgAlrReportTable(3) agnCnfgAlrReportEntry(1) agnCnfgAlrReportType(1)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radWan(3) wanGen(1) agnWanGen(2) cnfgAgnGen(2) agnCnfgAlarm(8) agnCnfgAlrReportTable(3) agnCnfgAlrReportEntry(1) agnCnfgAlrReportType(1)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/rad/radWan/wanGen/agnWanGen/cnfgAgnGen/agnCnfgAlarm/agnCnfgAlrReportTable/agnCnfgAlrReportEntry/agnCnfgAlrReportType

/iso/identified-organization/dod/internet/private/enterprises/rad/radWan/wanGen/agnWanGen/cnfgAgnGen/agnCnfgAlarm/agnCnfgAlrReportTable/agnCnfgAlrReportEntry/agnCnfgAlrReportType

/iso/org/dod/internet/private/enterprise/rad/radWan/wanGen/agnWanGen/cnfgAgnGen/agnCnfgAlarm/agnCnfgAlrReportTable/agnCnfgAlrReportEntry/agnCnfgAlrReportType

/iso/org/dod/internet/private/enterprises/rad/radWan/wanGen/agnWanGen/cnfgAgnGen/agnCnfgAlarm/agnCnfgAlrReportTable/agnCnfgAlrReportEntry/agnCnfgAlrReportType

/iso/iso-identified-organization/dod/internet/private/enterprise/rad/radWan/wanGen/agnWanGen/cnfgAgnGen/agnCnfgAlarm/agnCnfgAlrReportTable/agnCnfgAlrReportEntry/agnCnfgAlrReportType

/iso/iso-identified-organization/dod/internet/private/enterprises/rad/radWan/wanGen/agnWanGen/cnfgAgnGen/agnCnfgAlarm/agnCnfgAlrReportTable/agnCnfgAlrReportEntry/agnCnfgAlrReportType

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/164/3/1/2/2/8/3/1/1

Description by mibdepot

The alarm report type.
trap - traps will be sent only for alarms having the
selected On/Off severity or higher.
buffer - only alarms having the selected On/Off severity and
higher, will be reported to the buffer.
relay - relay contact will be activated only for alarms
having the selected On severity or higher.
For products having 2 relays, this is the R1 Relay.

alrLedOn/alrLedBlink - user should select a higher severity
(ReportOn) for alrLedBlink than for alrLedOn
(Blinking Led means a more severe alarm than steady
ON Led).
alrLedOn - MTCL-1 Alarm Led will be ON only when
agnSAlrStatusAll equals the selected severity or
higher, but lower severity than that selected for
'alrLedBlink'.
For products having 2 LEDs, this is the Minor LED.
alrLedBlink - MTCL-1 Alarm Led will Blink only when
agnSAlrStatusAll equals the selected severity or
higher.
For products having 2 LEDs, this is the Major LED.
relay2 - relay 2 contact will be activated only for alarms
having the selected On severity or higher.
This is the R2 Relay.

Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB

Description by circitor

The alarm report type.
trap - traps will be sent only for alarms having the
selected On/Off severity or higher.
buffer - only alarms having the selected On/Off severity and
higher, will be reported to the buffer.
relay - relay contact will be activated only for alarms
having the selected On severity or higher.
For products having 2 relays, this is the R1 Relay.

alrLedOn/alrLedBlink - user should select a higher severity
(ReportOn) for alrLedBlink than for alrLedOn
(Blinking Led means a more severe alarm than steady
ON Led).
alrLedOn - MTCL-1 Alarm Led will be ON only when
agnSAlrStatusAll equals the selected severity or
higher, but lower severity than that selected for
'alrLedBlink'.
For products having 2 LEDs, this is the Minor LED.
alrLedBlink - MTCL-1 Alarm Led will Blink only when
agnSAlrStatusAll equals the selected severity or
higher.
For products having 2 LEDs, this is the Major LED.
relay2 - relay 2 contact will be activated only for alarms
having the selected On severity or higher.
This is the R2 Relay.

Parsed from file RAD-MIB.mib
Module: RAD-MIB

Information by oid_info

Vendor: Rad Data Communications Ltd.
Module: DACS-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

agnCnfgAlrReportType OBJECT-TYPE
      SYNTAX INTEGER
         {
          trap        (1),
          buffer      (2),
          relay       (3),	 
          alrLedOn    (4),	 
          alrLedBlink (5),	 
		  relay2      (6)    
         }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
      "The alarm report type.
       trap - traps will be sent only for alarms having the
              selected On/Off severity or higher.
       buffer - only alarms having the selected On/Off severity and
                higher, will be reported to the buffer.
       relay -  relay contact will be activated only for alarms
                having the selected On severity or higher.
				For products having 2 relays, this is the R1 Relay.

       alrLedOn/alrLedBlink - user should select a higher severity
                (ReportOn) for alrLedBlink than for alrLedOn
                (Blinking Led means a more severe alarm than steady
                 ON Led).
       alrLedOn - MTCL-1 Alarm Led will be ON only when
                agnSAlrStatusAll equals the selected severity or
                higher, but lower severity than that selected for
                'alrLedBlink'.
				For products having 2 LEDs, this is the Minor LED.
       alrLedBlink - MTCL-1 Alarm Led will Blink only when
                agnSAlrStatusAll equals the selected severity or
                higher.
				For products having 2 LEDs, this is the Major LED.
       relay2 -  relay 2 contact will be activated only for alarms
                having the selected On severity or higher.
				This is the R2 Relay."
      ::= { agnCnfgAlrReportEntry 1 }

Information by circitor

agnCnfgAlrReportType OBJECT-TYPE
      SYNTAX INTEGER
         {
          trap        (1),
          buffer      (2),
          relay       (3),	 
          alrLedOn    (4),	 
          alrLedBlink (5),	 
		  relay2      (6)    
         }
      MAX-ACCESS read-only
      STATUS current
      DESCRIPTION
      "The alarm report type.
       trap - traps will be sent only for alarms having the
              selected On/Off severity or higher.
       buffer - only alarms having the selected On/Off severity and
                higher, will be reported to the buffer.
       relay -  relay contact will be activated only for alarms
                having the selected On severity or higher.
				For products having 2 relays, this is the R1 Relay.

       alrLedOn/alrLedBlink - user should select a higher severity
                (ReportOn) for alrLedBlink than for alrLedOn
                (Blinking Led means a more severe alarm than steady
                 ON Led).
       alrLedOn - MTCL-1 Alarm Led will be ON only when
                agnSAlrStatusAll equals the selected severity or
                higher, but lower severity than that selected for
                'alrLedBlink'.
				For products having 2 LEDs, this is the Minor LED.
       alrLedBlink - MTCL-1 Alarm Led will Blink only when
                agnSAlrStatusAll equals the selected severity or
                higher.
				For products having 2 LEDs, this is the Major LED.
       relay2 -  relay 2 contact will be activated only for alarms
                having the selected On severity or higher.
				This is the R2 Relay."
      ::= { agnCnfgAlrReportEntry 1 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.164)

Brighitte Shalom

Current Registration Authority (recovered by parent 1.3.6.1.4.1.164)

Smadar Tauber

Brothers (2)