This trap indicates that the number of far end
(remote) Loss of Synchronization alarms,
reported by the user DS1 interface
during the last minute, exceeds threshold.
For LA-110, threshold value is 10.
Parsed from file RAD-DS1-MIB.mib
Module: RAD-DS1-MIB
ds1ExcessiveRemoteSyncLossTrap NOTIFICATION-TYPE OBJECTS {alarmSeverity, alarmState, ifAlias} STATUS current DESCRIPTION "This trap indicates that the number of far end (remote) Loss of Synchronization alarms, reported by the user DS1 interface during the last minute, exceeds threshold. For LA-110, threshold value is 10." ::= { prtDS1Events 19 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.3.1.6.4.0.1 | ds1LocalMultiframeAlarmTrap | 0 | 0 | This trap indicates near end (Local) Loss of Multiframe Alignment, of the user E1 interface. |
1.3.6.1.4.1.164.3.1.6.4.0.2 | ds1RemoteMultiframeAlarmTrap | 0 | 0 | This trap indicates that the far end (remote) unit, connected to the user E1 interface, reports Loss of Multiframe Alignment. |
1.3.6.1.4.1.164.3.1.6.4.0.3 | ds1LinkFrameSlipTrap | 0 | 0 | This trap indicates that a Frame Slip occurred at the user DS1 interface. This usually indicates timing problems (incorrect selec… |
1.3.6.1.4.1.164.3.1.6.4.0.4 | ds1BpvErrorTrap | 0 | 0 | This trap indicates a Bipolar Violation (BPV) error has been detected at the user DS1 interface. |
1.3.6.1.4.1.164.3.1.6.4.0.5 | ds1ExcessiveBpvTrap | 0 | 0 | This trap indicates excessive number of Bipolar Violation errors (BPV) detected by the user DS1 interface |
1.3.6.1.4.1.164.3.1.6.4.0.6 | ds1Crc4ErrorTrap | 0 | 0 | This trap indicates that a frame with CRC-4 error has been detected at the user DS1 interface. |
1.3.6.1.4.1.164.3.1.6.4.0.7 | ds1ExcessiveErrorRatioTrap | 0 | 0 | This trap indicates that the error rate, detected at the user DS1 interface, on the frame synchronization bits is high, as define… |
1.3.6.1.4.1.164.3.1.6.4.0.8 | ds1RemoteSyncLossTrap | 0 | 0 | This trap indicates that the far-end (remote) unit, connected to user DS1 interface, reports Loss of Frame Alignment (Sync Loss). |
1.3.6.1.4.1.164.3.1.6.4.0.9 | ds1LocalSyncLossTrap | 0 | 0 | This trap indicates near end (Local) Loss of Frame Alignment failure (Sync Loss), of the user DS1 interface |
1.3.6.1.4.1.164.3.1.6.4.0.10 | ds1AisSyncLossTrap | 0 | 0 | This trap indicates near end (Local) Loss of Frame Alignment (Sync Loss), caused by the reception of AIS at the user DS1 interfac… |
1.3.6.1.4.1.164.3.1.6.4.0.11 | ds1AisTrap | 0 | 0 | This trap indicates AIS being received at the user DS1 interface. |
1.3.6.1.4.1.164.3.1.6.4.0.12 | ds1NetworkRemoteLoopTrap | 0 | 0 | This trap indicates that a remote loopback has been activated, on the local uplink interface. |
1.3.6.1.4.1.164.3.1.6.4.0.13 | ds1RemoteLoopTrap | 0 | 0 | This trap indicates that a remote loopback has been activated, on the local user port. |
1.3.6.1.4.1.164.3.1.6.4.0.14 | ds1LocalLoopTrap | 0 | 0 | This trap indicates that a local loopback has been activated on the user port. |
1.3.6.1.4.1.164.3.1.6.4.0.15 | ds1ExcessiveFrameSlipTrap | 0 | 0 | This trap indicates that the number of Frame Slips detected at the user DS1 interface, during the last minute exceeds threshold. … |
1.3.6.1.4.1.164.3.1.6.4.0.16 | ds1ExcessiveCrc4ErrorTrap | 0 | 0 | This trap indicates that the error rate detected on the CRC-4 bits at the user DS1 interface, is high. |
1.3.6.1.4.1.164.3.1.6.4.0.17 | ds1ExcessiveLocalMfAlarmTrap | 0 | 0 | This trap indicates that the number of local Loss of Multiframe Alignment events, detected at the user E1 interface during the la… |
1.3.6.1.4.1.164.3.1.6.4.0.18 | ds1ExcessiveRemoteMfAlarmTrap | 0 | 0 | This trap indicates that the number of Loss of multiframe alignment events reported by the remote unit connected to the user E1 in… |
1.3.6.1.4.1.164.3.1.6.4.0.20 | ds1ExcessiveLocalSyncLossTrap | 0 | 0 | This trap indicates that the number of Loss of local Synchronization alarms reported by the user DS1 interface during the last min… |