This parameter describes the following combinations of NRZ,
NRZI with FLAGS or IDLE between frames:
Legal values:
1 - NRZ with FLAGs between frames. RTS is Constant
2 - NRZI with FLAGs between frames. RTS is Constant.
3 - NRZ with IDLE between frames. RTS is Controlled.
4 - NRZI with IDLE between frames. RTS is Controlled.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This parameter describes the following combinations of NRZ,
NRZI with FLAGS or IDLE between frames:
Legal values:
1 - NRZ with FLAGs between frames. RTS is Constant
2 - NRZI with FLAGs between frames. RTS is Constant.
3 - NRZ with IDLE between frames. RTS is Controlled.
4 - NRZI with IDLE between frames. RTS is Controlled.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
pktSwchSnaSDLCLinkNRZS OBJECT-TYPE SYNTAX INTEGER { nrzFlags(1), nrziFlags(2), nrzIdle(3), nrziIdle(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " This parameter describes the following combinations of NRZ, NRZI with FLAGS or IDLE between frames: Legal values: 1 - NRZ with FLAGs between frames. RTS is Constant 2 - NRZI with FLAGs between frames. RTS is Constant. 3 - NRZ with IDLE between frames. RTS is Controlled. 4 - NRZI with IDLE between frames. RTS is Controlled." ::={ pktSwchSnaSDLCLinkEntryS 7}
pktSwchSnaSDLCLinkNRZS OBJECT-TYPE SYNTAX INTEGER { nrzFlags(1), nrziFlags(2), nrzIdle(3), nrziIdle(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " This parameter describes the following combinations of NRZ, NRZI with FLAGS or IDLE between frames: Legal values: 1 - NRZ with FLAGs between frames. RTS is Constant 2 - NRZI with FLAGs between frames. RTS is Constant. 3 - NRZ with IDLE between frames. RTS is Controlled. 4 - NRZI with IDLE between frames. RTS is Controlled." ::={ pktSwchSnaSDLCLinkEntryS 7}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.11.1.1.1 | pktSwchSnaSDLCLinkTypeS | 0 | 0 | This parameter identifies whether this link operates as TPAD(Primary) or HPAD(Secondary) SDLC device. |
1.3.6.1.4.1.164.8.11.1.1.2 | pktSwchSnaSDLCLinkPUSharedS | 0 | 0 | This parameter defines whether the link participates with more than one PU or not. |
1.3.6.1.4.1.164.8.11.1.1.3 | pktSwchSnaSDLCLinkDuplexPhyS | 0 | 0 | This parameter describes whether the physical level of the SDLC line is half or full duplex. |
1.3.6.1.4.1.164.8.11.1.1.4 | pktSwchSnaSDLCLinkflagsS | 0 | 0 | Number of flags between frames. |
1.3.6.1.4.1.164.8.11.1.1.5 | pktSwchSnaSDLCLinkDuplexS | 0 | 0 | This parameter shows wether the link level is Two Way Alternate or Two Way Simultaneous. |
1.3.6.1.4.1.164.8.11.1.1.6 | pktSwchSnaSDLCLinkClockS | 0 | 0 | This parameter defines the link clock rate |