Reference record for OID 1.3.6.1.4.1.164.8.13.2.1.5



parent
1.3.6.1.4.1.164.8.13.2.1 (pktSwchIpInterfaceEntry)
node code
5
node name
pktSwchIpInterfaceDest
dot oid
1.3.6.1.4.1.164.8.13.2.1.5
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radPS(8) pktSwchIp(13) pktSwchIpInterfaceTable(2) pktSwchIpInterfaceEntry(1) pktSwchIpInterfaceDest(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radPS(8) pktSwchIp(13) pktSwchIpInterfaceTable(2) pktSwchIpInterfaceEntry(1) pktSwchIpInterfaceDest(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radPS(8) pktSwchIp(13) pktSwchIpInterfaceTable(2) pktSwchIpInterfaceEntry(1) pktSwchIpInterfaceDest(5)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radPS(8) pktSwchIp(13) pktSwchIpInterfaceTable(2) pktSwchIpInterfaceEntry(1) pktSwchIpInterfaceDest(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) rad(164) radPS(8) pktSwchIp(13) pktSwchIpInterfaceTable(2) pktSwchIpInterfaceEntry(1) pktSwchIpInterfaceDest(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) rad(164) radPS(8) pktSwchIp(13) pktSwchIpInterfaceTable(2) pktSwchIpInterfaceEntry(1) pktSwchIpInterfaceDest(5)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/rad/radPS/pktSwchIp/pktSwchIpInterfaceTable/pktSwchIpInterfaceEntry/pktSwchIpInterfaceDest
  • /iso/identified-organization/dod/internet/private/enterprises/rad/radPS/pktSwchIp/pktSwchIpInterfaceTable/pktSwchIpInterfaceEntry/pktSwchIpInterfaceDest
  • /iso/org/dod/internet/private/enterprise/rad/radPS/pktSwchIp/pktSwchIpInterfaceTable/pktSwchIpInterfaceEntry/pktSwchIpInterfaceDest
  • /iso/org/dod/internet/private/enterprises/rad/radPS/pktSwchIp/pktSwchIpInterfaceTable/pktSwchIpInterfaceEntry/pktSwchIpInterfaceDest
  • /iso/iso-identified-organization/dod/internet/private/enterprise/rad/radPS/pktSwchIp/pktSwchIpInterfaceTable/pktSwchIpInterfaceEntry/pktSwchIpInterfaceDest
  • /iso/iso-identified-organization/dod/internet/private/enterprises/rad/radPS/pktSwchIp/pktSwchIpInterfaceTable/pktSwchIpInterfaceEntry/pktSwchIpInterfaceDest
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/164/8/13/2/1/5

    Description by mibdepot

    Destination of the packets received on this interface.

    Possible values:
    X.25 PVC: Port:LCN
    X.25 SVC: X.25 Addr or 'cid' followed by a predefined Call ID
    number.
    Frame Relay: Port:DLCI
    HDLC: 'H' followed by the HDLC Port Number
    SLIP: 'S' followed by the SLIP Channel Number
    Ethernet: 'E' followed by the Ethernet Port Number
    PPP: 'P' followed by the PPP Port Number.
    Bundles(for PPP)'B' followed by the PPP Bundle Number.
    No destination: None

    Default : None

    Examples:
    1. For SLIP destination which is Link no. 1, the destination
    will be S100 (100 instead of 1 is for Async).
    2. For SLIP destination of APS-8, channel no. 8:
    S8
    3. For PPP destination of APS-8, Sync Link no. 1: P1
    4. For PPP destination of APS-8, Async channel on link 1: P100

    Note for PPP:
    PPP protocol is allowed to be applied on Sync Links (1-3)
    as well as Async channels (1-24).
    In the ascii terminal: If the user writes P1 for example the device
    has to check which P1 it is. Is it the async channel 1 or
    Link no. 1. The device does NOT ALLOW configuring PPP on both
    Sync Link no. 1 and async RJ45 channel 1.
    When P1 is entered by the user, the protocols on async channel 1 and sync
    link 1 are checked. As only one of them is PPP, it will apply to the
    only PPP chan/link.

    Parsed from file Rad0485.MIB.txt
    Company: None
    Module: RAD-MIB

    Description by circitor

    Destination of the packets received on this interface.

    Possible values:
    X.25 PVC: Port:LCN
    X.25 SVC: X.25 Addr or 'cid' followed by a predefined Call ID
    number.
    Frame Relay: Port:DLCI
    HDLC: 'H' followed by the HDLC Port Number
    SLIP: 'S' followed by the SLIP Channel Number
    Ethernet: 'E' followed by the Ethernet Port Number
    PPP: 'P' followed by the PPP Port Number.
    Bundles(for PPP)'B' followed by the PPP Bundle Number.
    No destination: None

    Default : None

    Examples:
    1. For SLIP destination which is Link no. 1, the destination
    will be S100 (100 instead of 1 is for Async).
    2. For SLIP destination of APS-8, channel no. 8:
    S8
    3. For PPP destination of APS-8, Sync Link no. 1: P1
    4. For PPP destination of APS-8, Async channel on link 1: P100

    Note for PPP:
    PPP protocol is allowed to be applied on Sync Links (1-3)
    as well as Async channels (1-24).
    In the ascii terminal: If the user writes P1 for example the device
    has to check which P1 it is. Is it the async channel 1 or
    Link no. 1. The device does NOT ALLOW configuring PPP on both
    Sync Link no. 1 and async RJ45 channel 1.
    When P1 is entered by the user, the protocols on async channel 1 and sync
    link 1 are checked. As only one of them is PPP, it will apply to the
    only PPP chan/link.

    Parsed from file RAD-MIB.mib
    Module: RAD-MIB

    Information by oid_info

    Vendor: Rad Data Communications
    Module: RAD-MIB (rad-mib.mib)
    Type: TABULAR
    Access: read-write
    Syntax: DisplayString

    Automatically extracted from www.mibdepot.com

    Information by mibdepot

    pktSwchIpInterfaceDest OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Destination of the packets received on this interface.

         Possible values:
         X.25 PVC:       Port:LCN
         X.25 SVC:       X.25 Addr or 'cid' followed by a predefined Call ID
                         number.
         Frame Relay:    Port:DLCI
         HDLC:           'H' followed by the HDLC Port Number
         SLIP:           'S' followed by the SLIP Channel Number
         Ethernet:       'E' followed by the Ethernet Port Number
         PPP:            'P' followed by the PPP Port Number.
         Bundles(for PPP)'B' followed by the PPP Bundle Number.
         No destination:  None

         Default :       None

         Examples:
         1. For SLIP destination which is Link no. 1, the destination
            will be S100 (100 instead of 1 is for Async).
         2. For SLIP destination of APS-8, channel no. 8:
            S8
         3. For PPP destination of APS-8, Sync Link no. 1: P1
         4. For PPP destination of APS-8, Async channel on link 1: P100

         Note for PPP:
         PPP protocol is allowed to be applied on Sync Links (1-3)
         as well as Async channels (1-24).
         In the ascii terminal: If the user writes P1 for example the device
         has to check which P1 it is. Is it the async channel 1 or
         Link no. 1. The device does NOT ALLOW configuring PPP on both
         Sync Link no. 1 and async RJ45 channel 1.
         When P1 is entered by the user, the protocols on async channel 1 and sync
         link 1 are checked. As only one of them is PPP, it will apply to the
         only PPP chan/link."
         ::= { pktSwchIpInterfaceEntry 5 }

    Information by circitor

    pktSwchIpInterfaceDest OBJECT-TYPE
    SYNTAX DisplayString
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Destination of the packets received on this interface.

         Possible values:
         X.25 PVC:       Port:LCN
         X.25 SVC:       X.25 Addr or 'cid' followed by a predefined Call ID
                         number.
         Frame Relay:    Port:DLCI
         HDLC:           'H' followed by the HDLC Port Number
         SLIP:           'S' followed by the SLIP Channel Number
         Ethernet:       'E' followed by the Ethernet Port Number
         PPP:            'P' followed by the PPP Port Number.
         Bundles(for PPP)'B' followed by the PPP Bundle Number.
         No destination:  None

         Default :       None

         Examples:
         1. For SLIP destination which is Link no. 1, the destination
            will be S100 (100 instead of 1 is for Async).
         2. For SLIP destination of APS-8, channel no. 8:
            S8
         3. For PPP destination of APS-8, Sync Link no. 1: P1
         4. For PPP destination of APS-8, Async channel on link 1: P100

         Note for PPP:
         PPP protocol is allowed to be applied on Sync Links (1-3)
         as well as Async channels (1-24).
         In the ascii terminal: If the user writes P1 for example the device
         has to check which P1 it is. Is it the async channel 1 or
         Link no. 1. The device does NOT ALLOW configuring PPP on both
         Sync Link no. 1 and async RJ45 channel 1.
         When P1 is entered by the user, the protocols on async channel 1 and sync
         link 1 are checked. As only one of them is PPP, it will apply to the
         only PPP chan/link."
         ::= { pktSwchIpInterfaceEntry 5 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.164)

    Brighitte Shalom

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.164)

    Smadar Tauber

    Brothers (17)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.164.8.13.2.1.1 pktSwchIpInterfaceId 0 0 Identification Number of an entry in the IP interface table.
    1.3.6.1.4.1.164.8.13.2.1.2 pktSwchIpInterfaceAddress 0 0 The IP address of the interface. Legal input: any legal IP address.
    Default value: 0.0.0.0
    1.3.6.1.4.1.164.8.13.2.1.3 pktSwchIpInterfaceAddressMask 0 0 The IP mask of the interface. Legal input: any legal IP mask:
    A string of the format X.X.X.X where every X is a number in
    the ran…
    1.3.6.1.4.1.164.8.13.2.1.4 pktSwchIpInterfaceSendDefRoutMsgOnly 0 0 Some of the RIP messages are default router messages.
    These messages inform who the default router is.

    This MIB object allows the…
    1.3.6.1.4.1.164.8.13.2.1.6 pktSwchIpInterfaceInactivity 0 0 Inactivity time in minutes before disconnecting the X25 SVC call.
    Range: 0..255. Default: 2.
    1.3.6.1.4.1.164.8.13.2.1.7 pktSwchIpInterfaceLinkCost 0 0 This value will be added to the value written in the
    metric field of the received frame.
    Range: 1..pktSwchIpGlobalMaxHopCount
    Defa…
    1.3.6.1.4.1.164.8.13.2.1.8 pktSwchIpInterfaceOptions 0 0 When netIpAddress is selected the interface IP address
    will not be the IP address of the interface. It will be the IP
    address of …
    1.3.6.1.4.1.164.8.13.2.1.9 pktSwchIpInterfaceStatus 0 0 The status of this filter table entry.
    valid - This entry was saved.
    createRequest - Request to create a new entry.
    underC…
    1.3.6.1.4.1.164.8.13.2.1.10 pktSwchIpInterfaceRxFrames 0 0 No. of frames which were received on this IP interface.
    1.3.6.1.4.1.164.8.13.2.1.11 pktSwchIpInterfaceRxExpiredTtl 0 0 No. of frames which were received on this IP interface
    with an Expired Time to Live value.
    1.3.6.1.4.1.164.8.13.2.1.12 pktSwchIpInterfaceRxUnknownDest 0 0 No. of frames which were received on this IP interface
    with an unknown IP destination. No default router is configured.
    These fra…
    1.3.6.1.4.1.164.8.13.2.1.13 pktSwchIpInterfaceTxFrames 0 0 No. of frames which were Transmitted from this IP interface.
    1.3.6.1.4.1.164.8.13.2.1.14 pktSwchIpInterfaceTxQueueBufs 0 0 No. of buffers which are waiting in the Trasnsmit Queue.
    1.3.6.1.4.1.164.8.13.2.1.15 pktSwchIpInterfaceTxDiscarded 0 0 No. of frames which were ready to be transmitted but were
    Discarded. The PS will discard frames if the transmit queue
    is too long.
    1.3.6.1.4.1.164.8.13.2.1.16 pktSwchIpInterfaceRipRxFrames 0 0 No. of RIP frames which were received on this IP interface.
    1.3.6.1.4.1.164.8.13.2.1.17 pktSwchIpInterfaceRipTxFrames 0 0 No. of RIP Frames which were transmitted from this IP interface.
    1.3.6.1.4.1.164.8.13.2.1.18 pktSwchIpInterfaceRipWaitingMsgs 0 0 No. of RIP messages which are waiting to be transmitted to the
    Network.