Defines the contents of each line in the RAD PS Frame Relay Active Table.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
Defines the contents of each line in the RAD PS Frame Relay Active Table.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: ENTRY
Access: not-accessible
Syntax: PktSwchFrAEntry
Automatically extracted from www.mibdepot.com
pktSwchFrAEntry OBJECT-TYPE SYNTAX PktSwchFrAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the contents of each line in the RAD PS Frame Relay Active Table." INDEX { pktSwchFrIfIndexA } ::= { pktSwchFrATable 1 }
pktSwchFrAEntry OBJECT-TYPE SYNTAX PktSwchFrAEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the contents of each line in the RAD PS Frame Relay Active Table." INDEX { pktSwchFrIfIndexA } ::= { pktSwchFrATable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.8.3.1.1 | pktSwchFrIfIndexA | 0 | 0 | This is the ifIndex of the frame relay port. |
1.3.6.1.4.1.164.8.8.3.1.2 | pktSwchFrMaintProtA | 0 | 0 | This defines what maintenance protocol is running over this port. 0 - No maintenance protocol. 1 - ANSI PVC maintenance protocol … |
1.3.6.1.4.1.164.8.8.3.1.3 | pktSwchFrMaintModeA | 0 | 0 | This defines the mode of maintenance protocol running over this port. |
1.3.6.1.4.1.164.8.8.3.1.4 | pktSwchFrRxPoolRedLineA | 0 | 0 | When the number of empty receive buffers at the port reaches this figure (of frames), the port receiver is congested. This fiel… |
1.3.6.1.4.1.164.8.8.3.1.5 | pktSwchFrRxPoolOkA | 0 | 0 | Clear the receive congestion condition when the number of empty receive buffers at the port reaches this figure. This value (of… |
1.3.6.1.4.1.164.8.8.3.1.6 | pktSwchFrTxPoolRedLineA | 0 | 0 | When the number of frames awaiting transmission reaches this figure, the port transmitter is congested. This field value should… |
1.3.6.1.4.1.164.8.8.3.1.7 | pktSwchFrTxPoolOkA | 0 | 0 | Clear the transmit congestion condition when the number of frames awaiting transmission at the port reaches this figure. This v… |
1.3.6.1.4.1.164.8.8.3.1.8 | pktSwchFrTxCeilingA | 0 | 0 | The maximum allowable transmit pool for this port. |
1.3.6.1.4.1.164.8.8.3.1.9 | pktSwchFrInternalClockA | 0 | 0 | The baud rate of the internal clock. |
1.3.6.1.4.1.164.8.8.3.1.10 | pktSwchFrNrzModeA | 0 | 0 | The data encoding format. |
1.3.6.1.4.1.164.8.8.3.1.11 | pktSwchFrDlcmiPollingInterval | 0 | 0 | This is the number of seconds between succes- sive status enquiry messages. |
1.3.6.1.4.1.164.8.8.3.1.12 | pktSwchFrDlcmiFullEnquiryInterval | 0 | 0 | Number of status enquiry intervals that pass before issuance of a full status enquiry mes- sage. |
1.3.6.1.4.1.164.8.8.3.1.13 | pktSwchFrDlcmiErrorThreshold | 0 | 0 | This is the maximum number of unanswered Status Enquiries the equipment shall accept be- fore declaring the interface down. |
1.3.6.1.4.1.164.8.8.3.1.14 | pktSwchFrDlcmiMonitoredEvents | 0 | 0 | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvent… |
1.3.6.1.4.1.164.8.8.3.1.15 | pktSwchFrDlciHeaderModeA | 0 | 0 | Dlci Header length for this FR port. Option 4 means that there will be no management Dlci in the range of 1024 to 8388607. The ma… |
1.3.6.1.4.1.164.8.8.3.1.16 | pktSwchFrDcdLinkFailureA | 0 | 0 | Link Failure Detection by DCD. If Link Failure detection by DCD is on - (3), when the DCD is down, the FR SW will detect it and c… |
1.3.6.1.4.1.164.8.8.3.1.17 | pktSwchFrTxIdlesA | 0 | 0 | This parameter shows whether the PS will Transmit Idles between frames and control the RTS pin. Default: no(2). |
1.3.6.1.4.1.164.8.8.3.1.18 | pktSwchFrOperationModeA | 0 | 0 | When H/W Control is configured, the SCC H/W will detect the change in the DCD or CTS signals and Start or Stop transmission auto… |
1.3.6.1.4.1.164.8.8.3.1.19 | pktSwchFrPhysInterfOptionsA | 0 | 0 | This is the physical interface. Note that the DDS physical interface H/W does not exist in the FPS-8. It is relevant for other PS… |