The instantaneous eye quality measurment (EQM) reported
by the modem for the current call. The EQM is a measure
of the quality of the signal being received by the modem.
Lower values indicate a lower error rate, and are better.
Higher values will cause the modem to reduce the modulation
rate. The absolute values are not comparable between
different modem protocols (V.32bis, V.34, etc.).
Parsed from file shiva-dmc.mib.txt
Company: shiva
Module: SHIVA-DMC-MIB
Vendor: Shiva Corporation
Module: SHIVA-DMC-MIB
[Automatically extracted from oidview.com]
dmcModemEQM OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The instantaneous eye quality measurment (EQM) reported by the modem for the current call. The EQM is a measure of the quality of the signal being received by the modem. Lower values indicate a lower error rate, and are better. Higher values will cause the modem to reduce the modulation rate. The absolute values are not comparable between different modem protocols (V.32bis, V.34, etc.)." ::= { dmcModemEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.166.1.22.2.1.1.1 | dmcModemIfIndex | 0 | 0 | The ifIndex of the entry in ifTable for this particular modem on a DMC. This is also the index to the matching callActiveEntry i… |
1.3.6.1.4.1.166.1.22.2.1.1.2 | dmcModemCallNumber | 0 | 0 | The number of the CallInterface that the call on this modem is on, or 0 if there is no call. This is the same as sessLineLine, th… |
1.3.6.1.4.1.166.1.22.2.1.1.3 | dmcModemFirmRev | 0 | 0 | Revision of the firmware running in this modem. |
1.3.6.1.4.1.166.1.22.2.1.1.4 | dmcModemDataPumpRev | 0 | 0 | Revision of the datapump chip in this modem. |
1.3.6.1.4.1.166.1.22.2.1.1.5 | dmcModemErrorCorrection | 0 | 0 | The error control protocol in use by the modem for the current call. |
1.3.6.1.4.1.166.1.22.2.1.1.6 | dmcModemDataCompression | 0 | 0 | The data compression protocol in use by the modem for the current call. |
1.3.6.1.4.1.166.1.22.2.1.1.8 | dmcModemReceiveLevel | 0 | 0 | The received signal strength at the modem. The units are dBm (decibels relative to one milliwatt). Low values, such as -50 dBm,… |