Row definition of atm iisp interface
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Row definition of atm iisp interface
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
atmIispConfigEntry OBJECT-TYPE SYNTAX AtmIispConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm iisp interface" INDEX { atmIispIfIndex } ::= { atmIispConfigTable 1 }
atmIispConfigEntry OBJECT-TYPE SYNTAX AtmIispConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Row definition of atm iisp interface" INDEX { atmIispIfIndex } ::= { atmIispConfigTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.5.2.1.1 | atmIispIfIndex | 0 | 0 | interface index (slot/port/channel) SSPPCCC |
| 1.3.6.1.4.1.1751.2.18.5.2.1.2 | atmIispSvcMinVpi | 0 | 0 | The lower bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.3 | atmIispSvcMaxVpi | 0 | 0 | The upper bound of the VPI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.4 | atmIispSvcMinVci | 0 | 0 | The lower bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.5 | atmIispSvcMaxVci | 0 | 0 | The upper bound of the VCI for SVC connections. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.6 | atmIispAdminStatus | 0 | 0 | The administrative action: 'outOfService' means take the UNI out of service 'inService' means take the UNI in service 'delete' … |
| 1.3.6.1.4.1.1751.2.18.5.2.1.7 | atmIispOperStatus | 0 | 0 | The operational status of the UNI: 'outOfService' means the UNI is out of service 'inService' means the UNI is in service |
| 1.3.6.1.4.1.1751.2.18.5.2.1.8 | atmIispOverSubscription | 0 | 0 | Over subscription factor |
| 1.3.6.1.4.1.1751.2.18.5.2.1.9 | atmIispT303 | 0 | 0 | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.10 | atmIispT308 | 0 | 0 | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.11 | atmIispT309 | 0 | 0 | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.12 | atmIispT310 | 0 | 0 | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.13 | atmIispT316 | 0 | 0 | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.14 | atmIispT317 | 0 | 0 | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.15 | atmIispT322 | 0 | 0 | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.16 | atmIispT398 | 0 | 0 | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.17 | atmIispT399 | 0 | 0 | Timer value - seconds |
| 1.3.6.1.4.1.1751.2.18.5.2.1.18 | atmIispAtmSignalingStatus | 0 | 0 | Indicates if atm signaling is enabled or disabled for this interface. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.19 | atmIispAvailBwIgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.20 | atmIispAvailBwEgr | 0 | 0 | The Avail Bandwidth for that interface in cells per sec. Bandwidth for UBR conns will not be accounted for. |
| 1.3.6.1.4.1.1751.2.18.5.2.1.21 | atmIispUPCSupp | 0 | 0 | upc supp off/on |
| 1.3.6.1.4.1.1751.2.18.5.2.1.22 | atmIispUbrLoadBalSupp | 0 | 0 | load balancing supp for ubr conns off/on |
| 1.3.6.1.4.1.1751.2.18.5.2.1.23 | atmIispSscopRxWndSz | 0 | 0 | The receive window size for the SSCOP layer |
| 1.3.6.1.4.1.1751.2.18.5.2.1.24 | atmIispConnTrafficShapingFlag | 0 | 0 | Traffic Shaping for Conn was enabled primarily because the core would lose cells since we were non-conformant cells. Therefore the… |