To enable or disable Telnet interface.
Parsed from file as2000.5_7.mib.txt
Company: None
Module: AS-2000
This object is used to enable or disable telnet access and
to specify the number of active telnet sessions. When this
object is set to 0, telnet access is disabled. When this object
is set to something greater than 0, then it specifies the maximum
number of active telnet sessions.
Parsed from file AS-2000.mib
Module: AS-2000
Vendor: Lucent Technologies
Module: AS-2000
[Automatically extracted from oidview.com]
psTelnetStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "To enable or disable Telnet interface." ::= { orinocoAgent 14 }
psTelnetSesssions OBJECT-TYPE SYNTAX INTEGER (0..5) ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to enable or disable telnet access and to specify the number of active telnet sessions. When this object is set to 0, telnet access is disabled. When this object is set to something greater than 0, then it specifies the maximum number of active telnet sessions." ::= { orinocoAgent 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.4.3.6.14.0 | psTelnetStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.4.3.6.1 | psVersion | 1 | 1 | The version of the Access Server software currently execuing. Would be text string including the major and minor release number, … |
| 1.3.6.1.4.1.1751.2.4.3.6.2 | psIPAddress | 1 | 1 | The IP address to be assigned to the Access Server (to change from factory fitted IP address). |
| 1.3.6.1.4.1.1751.2.4.3.6.3 | psSubnetMask | 1 | 1 | The subnet mask of the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.6.4 | psDefaultGateway | 1 | 1 | The default gateway for the Access Server. |
| 1.3.6.1.4.1.1751.2.4.3.6.5 | psIPAddressType | 1 | 1 | This can be DHCP/BOOTP(dynamic) or assigned by User via CLI or AS Manager(static). The IP address of the Access Server will be ass… |
| 1.3.6.1.4.1.1751.2.4.3.6.6 | psAdministrativeState | 1 | 1 | The administrative state of the substation, can be Up or Down. |
| 1.3.6.1.4.1.1751.2.4.3.6.7 | psTFTPIPAddress | 1 | 1 | The IP address of the TFTP server. |
| 1.3.6.1.4.1.1751.2.4.3.6.8 | psTFTPFilename | 1 | 1 | The filename of the image in the TFTP server. |
| 1.3.6.1.4.1.1751.2.4.3.6.9 | psTFTPOperation | 1 | 1 | The operation to be done, can be upload or download. |
| 1.3.6.1.4.1.1751.2.4.3.6.10 | psReboot | 1 | 1 | This variable must be set to reboot the Access Server. The value is the number of seconds to wait to do a reboot. |
| 1.3.6.1.4.1.1751.2.4.3.6.11 | psSecondsToAdminDown | 1 | 1 | The count of seconds to go before the administrative state of the Access Server is made down. |
| 1.3.6.1.4.1.1751.2.4.3.6.12 | psContactEmail | 1 | 1 | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.4.1.1751.2.4.3.6.13 | psBSPBootloaderVersion | 1 | 1 | This object represents the BSP/Bootloader version that is currently stored in the access server device.. |
| 1.3.6.1.4.1.1751.2.4.3.6.15 | psTelnetPassword | 1 | 1 | Password to access Access Server from Telenet. |
| 1.3.6.1.4.1.1751.2.4.3.6.16 | psTelnetPort | 1 | 1 | The TCP/IP port for Access Server Telenet daemon. |
| 1.3.6.1.4.1.1751.2.4.3.6.17 | psTelnetTimeout | 1 | 1 | Telnet inactivity timeout in minutes. The default value is 15 minutes |
| 1.3.6.1.4.1.1751.2.4.3.6.18 | psTelnetLoginTimeout | 1 | 1 | Telnet login timeout in seconds. The default value is 30 seconds |
| 1.3.6.1.4.1.1751.2.4.3.6.19 | psSerialBaudRate | 1 | 1 | Serial interface baud rate. The default value is 9600 |
| 1.3.6.1.4.1.1751.2.4.3.6.20 | psSerialDataBits | 1 | 1 | Serial interface data bits. The default value is 8 |
| 1.3.6.1.4.1.1751.2.4.3.6.21 | psSerialParity | 1 | 1 | Serial interface Parity check. The default value is None |
| 1.3.6.1.4.1.1751.2.4.3.6.22 | psSerialStopBits | 1 | 1 | Serial interface stop bits. The default value is 1 |
| 1.3.6.1.4.1.1751.2.4.3.6.23 | psSerialFlowControl | 1 | 1 | Serial interface Flow control. The default value is None |
| 1.3.6.1.4.1.1751.2.4.3.6.24 | psTFTPFileType | 1 | 1 | The type of the file to be uploaded or downloaded to/from the access server. The AllConfigFiles options shall upload or download… |
| 1.3.6.1.4.1.1751.2.4.3.6.25 | psDeviceSerialNumber | 1 | 1 | This parameter identifies the serial number of the system. |
| 1.3.6.1.4.1.1751.2.4.3.6.26 | psBroadcastMessage | 1 | 1 | This parameter allows to set customized messages to be sent to all connected clients. |
| 1.3.6.1.4.1.1751.2.4.3.6.27 | psPOSTVersionNumber | 1 | 1 | This parameter identifies the POST version number of the system. |
| 1.3.6.1.4.1.1751.2.4.3.6.28 | psHardwareVersionNumber | 1 | 1 | This parameter identifies the Hardware version number of the system. |