Enable or disable the designation of this interface
as that which will 'receive' BOOTP/DHCP requests with a
source IP address of 0.0.0.0. This is used on a multinetted
interface when it is otherwise ambiguous as to which interface
'receives' the request, and is important because the IP
address of the receiving interface is inserted into the giaddr
field of the request before the request is relayed to the
BOOTP/DHCP server.
If this attribute is disabled, then:
- if only one IP interface exists on a VLAN, that IP address
is inserted into the request
- if more than one IP address exists on a VLAN, the router will
choose an interface
If more than one IP interface on a given VLAN has this attribute enabled,
the router will choose an interface among those with the attribute
enabled.
Parsed from file cjnipifmgmt.mib.txt
Company: None
Module: IP-INTERFACE-MANAGEMENT-MIB
Enable or disable the designation of this interface
as that which will 'receive' BOOTP/DHCP requests with a
source IP address of 0.0.0.0. This is used on a multinetted
interface when it is otherwise ambiguous as to which interface
'receives' the request, and is important because the IP
address of the receiving interface is inserted into the giaddr
field of the request before the request is relayed to the
BOOTP/DHCP server.
If this attribute is disabled, then:
- if only one IP interface exists on a VLAN, that IP address
is inserted into the request
- if more than one IP address exists on a VLAN, the router will
choose an interface
If more than one IP interface on a given VLAN has this attribute enabled,
the router will choose an interface among those with the attribute
enabled.
Parsed from file IP-INTERFACE-MANAGEMENT-MIB.mib
Module: IP-INTERFACE-MANAGEMENT-MIB
Vendor: Lucent Technologies
Module: IP-INTERFACE-MANAGEMENT-MIB
[Automatically extracted from oidview.com]
cjnIpIfBootpDhcpGateway OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the designation of this interface as that which will 'receive' BOOTP/DHCP requests with a source IP address of 0.0.0.0. This is used on a multinetted interface when it is otherwise ambiguous as to which interface 'receives' the request, and is important because the IP address of the receiving interface is inserted into the giaddr field of the request before the request is relayed to the BOOTP/DHCP server. If this attribute is disabled, then: - if only one IP interface exists on a VLAN, that IP address is inserted into the request - if more than one IP address exists on a VLAN, the router will choose an interface If more than one IP interface on a given VLAN has this attribute enabled, the router will choose an interface among those with the attribute enabled." ::= { cjnIpIfEntry 15 }
cjnIpIfBootpDhcpGateway OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Enable or disable the designation of this interface as that which will 'receive' BOOTP/DHCP requests with a source IP address of 0.0.0.0. This is used on a multinetted interface when it is otherwise ambiguous as to which interface 'receives' the request, and is important because the IP address of the receiving interface is inserted into the giaddr field of the request before the request is relayed to the BOOTP/DHCP server. If this attribute is disabled, then: - if only one IP interface exists on a VLAN, that IP address is inserted into the request - if more than one IP address exists on a VLAN, the router will choose an interface If more than one IP interface on a given VLAN has this attribute enabled, the router will choose an interface among those with the attribute enabled." ::= { cjnIpIfEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.15.0 | cjnIpIfBootpDhcpGateway | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.1 | cjnIpIfIndex | 0 | 0 | The globally unique identifier for this interface. This number MUST correlate with the IfTable's IfIndex in MIB-II or RFC2233 |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.2 | cjnIpIfRowStatus | 0 | 0 | The Status of this entry in the table. Note the available states: active(1), notInService(2) notReady(3), createAndGo(4), createAndW… |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.3 | cjnIpIfIpAddress | 0 | 0 | The IP Address associated with this IP interface. |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.4 | cjnIpIfIpSubnetMask | 0 | 0 | The IP Subnet Mask associated with this IP interface. |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.5 | cjnIpIfMacFormat | 0 | 0 | The ethernet framing type used on this IP interface. |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.6 | cjnIpIfVlanIfIndex | 0 | 0 | The interface index of the VLAN or Ethernet or Serial console for this interface. This number MUST correlate with the IfTable's … |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.7 | cjnIpIfName | 0 | 0 | The protocol Unique name associated with this interface. This name is limited to 32 characters and may appear in other protocol … |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.8 | cjnIpIfIpRouting | 0 | 0 | The Consumption / Forwarding mode assocated with this IP Interface. The RoutingAndMgmt mode enables IP Routing and local Packet … |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.9 | cjnIpIfSpoofCheckEnabled | 0 | 0 | This feature is not supported at this time. |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.10 | cjnIpIfProxyArpEnabled | 0 | 0 | enables / disables Proxy Arp functionality on this interface. |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.11 | cjnIpIfIcmpRedirEnabled | 0 | 0 | enables / disables Icmp Redirect messages from originating from this interface. |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.12 | cjnIpIfUdpRbcastMode | 0 | 0 | configures the NetBIOS UDP Rebroadcast mode on this interface. |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.13 | cjnIpIfAdminStatus | 0 | 0 | The administrative state of this interface. |
| 1.3.6.1.4.1.1751.2.43.3.1.1.2.1.14 | cjnIpIfStatus | 0 | 0 | The current state of this interface. |