The modem hardware revision number.
Parsed from file PDN-ELOOP-MIB.mib.txt
Company: paradyne
Module: PDN-ELOOP-MIB
Vendor: Paradyne
Module: PDN-ELOOP-MIB (PDN-ELOOP-MIB.mib)
Type: TABULAR
Access: read-only
Syntax: DisplayString
Automatically extracted from www.mibdepot.com
eloopCOMdmDeviceRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The modem hardware revision number." REFERENCE "Extent Capabilities XilinkModem" ::= { eloopCOMdmDeviceEntry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.1 | eloopCOMdmDeviceIndex | 0 | 0 | The index for each CO modem E-net interface. This object corresponds to MIB-II ifIndex. |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.2 | eloopCOMdmDeviceType | 0 | 0 | The CO modem device type. |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.3 | eloopCOMdmUserConfigMAC | 0 | 0 | The six byte MAC address of the CO device that can configured by the management entity. It will not come into effect unless the C… |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.4 | eloopCOMdmFirmwareRev | 0 | 0 | The firmware revision for this CO modem device. |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.5 | eloopCOMdmModulationCapability | 0 | 0 | The modulation capability for the CO modem device. |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.6 | eloopCOMdmSpeedCount | 0 | 0 | The number of speeds supported by CO modem device. Also the number of entries in the eloopCOMdmIfSpeedTable. |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.7 | eloopCOMdmBlockBroadcast | 0 | 0 | If Broadcasts are enabled, the modem will pass them out the port. |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.9 | eloopCOMdmDeviceBTEQRev | 0 | 0 | The modem hardware BTEQ revision number |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.10 | eloopCOMdmDeviceReset | 0 | 0 | If reset(2) is written to the object, it forces the modem to perform a cold restart. A read of the variable, if exists will alway… |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.11 | eloopCOMdmDeviceCapability | 0 | 0 | The general capabilites for the CO modem device. This indicates the features supported by the CO modem firmware. |
1.3.6.1.4.1.1795.2.24.18.4.2.2.1.1.12 | eloopCOMdmTrafficClassesEnabled | 0 | 0 | The value true(1) indicates that Traffic Classes are enabled on this CO Modem. When false(2), the CO Modem operates with a singl… |