This indicates the operational status of the PVC or management link
of which this DLCI is an endpoint. If the physical or logical
interface is not active, a value of inactive(3) will be returned.
If LMI is set to 'none', a value of active(2) will always be
returned. If LMI is enabled and data can be sent down the circuit,
a value of active(2) will be returned. If data cannot be sent down
the circuit, a value of inactive(3) will be returned.
The value invalid(1) is returned if the virtual circuit to which this
DLCI refers is not valid. The virtual circuit is invalid when some
portion of the virtual circuit has not been configured. The value of
disabled(4) is returned when the virtual circuit that this DLCI refers
to is disabled. A virtual circuit is considered disabled when it has
been intentionally configured in such a way that activation of the
circuit is not possible.
Parsed from file pdn_FrExt.mib.txt
Company: paradyne
Module: PDN-FREXT-MIB
Vendor: Paradyne
Module: PDNDCE-MIB (pdndce.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
devFrExtDlciStsOpState OBJECT-TYPE SYNTAX INTEGER { invalid (1), active (2), inactive (3), disabled (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the operational status of the PVC or management link of which this DLCI is an endpoint. If the physical or logical interface is not active, a value of inactive(3) will be returned. If LMI is set to 'none', a value of active(2) will always be returned. If LMI is enabled and data can be sent down the circuit, a value of active(2) will be returned. If data cannot be sent down the circuit, a value of inactive(3) will be returned. The value invalid(1) is returned if the virtual circuit to which this DLCI refers is not valid. The virtual circuit is invalid when some portion of the virtual circuit has not been configured. The value of disabled(4) is returned when the virtual circuit that this DLCI refers to is disabled. A virtual circuit is considered disabled when it has been intentionally configured in such a way that activation of the circuit is not possible." ::= { devFrExtDlciStsEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.2 | devFrExtDlciStsInactiveSecs | 0 | 0 | Indicates the cumulative number of seconds during which the DLCI's status was found to be inactive(3). |
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.3 | devFrExtDlciStsInactives | 0 | 0 | Indicates the number of times the DLCI's status switched from active(2) to inactive(3). |
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.4 | devFrExtDlciStsBECNSecs | 0 | 0 | Indicates the cumulative number of seconds during which a BECN was received through this DLCI end point. |
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.5 | devFrExtDlciStsFECNSecs | 0 | 0 | Indicates the cumulative number of seconds during which a FECN was received through this DLCI end point. |
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.6 | devFrExtDlciStsConjestedSecs, devFrExtDlciStsCongestedSecs | 0 | 0 | Indicates the cumulative number of seconds during which either a BECN or a FECN was received through this DLCI end point. |
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.7 | devFrExtDlciStsUpTime | 0 | 0 | Indicates the amount of time in centiseconds that the DLCI status has been active. This value will be zero if the DLCI is not a… |
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.8 | devFrExtDlciStsBackupCnt | 0 | 0 | The number of times this circuit has been placed into backup since its creation. This will report zero for all circuits that eit… |
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.9 | devFrExtDlciStsBackupTime | 0 | 0 | The amount of time in centiseconds that the DLCI has been in backup since its creation. This is the actual amount of time that t… |
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.10 | devFrExtDlciStsBackupReason | 0 | 0 | This object indicates the reason why the circuit is currently in backup. |
| 1.3.6.1.4.1.1795.2.24.2.6.9.4.2.1.11 | devFrExtDlciStsBackupLastChange | 0 | 0 | The value of sysUpTime when the data on this circuit was last switched either from the primary to the alternate or from the alter… |