This is a GAUGE because this attribute is 32-bit unsigned, non-increasing
A value that uniquely identifies the set of capabilities of the LOCAL Auto
Negotiation entity. The value is a sum which initially takes the value zero.
Then, for each capability of the LOCAL interface, 2 raised to the power
noted below is added to the sum. For example, a LOCAL interface which has
the capability to support only 100Base-TX would have a value of 128 (2**7).
In contrast, a LOCAL interface which supports both 100Base-TX and 100Base-TX
Full Duplex would cause this object to have a value of 384 ((2**7) + (2**8)).
The powers of 2 assigned to the capabilities are these:
Power Capability
0 Pause
1 ASM_DIR
5 10Base-T
6 10Base-T Full Duplex
7 100Base-TX
8 100Base-TX Full Duplex
9 100Base-T4
14 1000Base-X
15 1000Base-X Full Duplex
NOTE: This parameter is only valid if SpeedSelect is configured for NWay.
Parsed from file csmacd.mib.txt
Company: None
Module: Wellfleet-CSMACD-MIB
This is a GAUGE because this attribute is 32-bit unsigned, non-increasing
A value that uniquely identifies the set of capabilities of the LOCAL Auto
Negotiation entity. The value is a sum which initially takes the value zero.
Then, for each capability of the LOCAL interface, 2 raised to the power
noted below is added to the sum. For example, a LOCAL interface which has
the capability to support only 100Base-TX would have a value of 128 (2**7).
In contrast, a LOCAL interface which supports both 100Base-TX and 100Base-TX
Full Duplex would cause this object to have a value of 384 ((2**7) + (2**8)).
The powers of 2 assigned to the capabilities are these:
Power Capability
0 Pause
1 ASM_DIR
5 10Base-T
6 10Base-T Full Duplex
7 100Base-TX
8 100Base-TX Full Duplex
9 100Base-T4
14 1000Base-X
15 1000Base-X Full Duplex
NOTE: This parameter is only valid if SpeedSelect is configured for NWay.
Parsed from file Wellfleet-CSMACD-MIB.mib
Module: Wellfleet-CSMACD-MIB
Vendor: Wellfleet
Module: Wellfleet-CSMACD-MIB
[Automatically extracted from oidview.com]
wfCSMACDAutoNegLocalCapability OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This is a GAUGE because this attribute is 32-bit unsigned, non-increasing A value that uniquely identifies the set of capabilities of the LOCAL Auto Negotiation entity. The value is a sum which initially takes the value zero. Then, for each capability of the LOCAL interface, 2 raised to the power noted below is added to the sum. For example, a LOCAL interface which has the capability to support only 100Base-TX would have a value of 128 (2**7). In contrast, a LOCAL interface which supports both 100Base-TX and 100Base-TX Full Duplex would cause this object to have a value of 384 ((2**7) + (2**8)). The powers of 2 assigned to the capabilities are these: Power Capability 0 Pause 1 ASM_DIR 5 10Base-T 6 10Base-T Full Duplex 7 100Base-TX 8 100Base-TX Full Duplex 9 100Base-T4 14 1000Base-X 15 1000Base-X Full Duplex NOTE: This parameter is only valid if SpeedSelect is configured for NWay." ::= { wfCSMACDAutoNegEntry 8 }
wfCSMACDAutoNegLocalCapability OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "This is a GAUGE because this attribute is 32-bit unsigned, non-increasing A value that uniquely identifies the set of capabilities of the LOCAL Auto Negotiation entity. The value is a sum which initially takes the value zero. Then, for each capability of the LOCAL interface, 2 raised to the power noted below is added to the sum. For example, a LOCAL interface which has the capability to support only 100Base-TX would have a value of 128 (2**7). In contrast, a LOCAL interface which supports both 100Base-TX and 100Base-TX Full Duplex would cause this object to have a value of 384 ((2**7) + (2**8)). The powers of 2 assigned to the capabilities are these: Power Capability 0 Pause 1 ASM_DIR 5 10Base-T 6 10Base-T Full Duplex 7 100Base-TX 8 100Base-TX Full Duplex 9 100Base-T4 14 1000Base-X 15 1000Base-X Full Duplex NOTE: This parameter is only valid if SpeedSelect is configured for NWay." ::= { wfCSMACDAutoNegEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.16.1.1.1 | wfCSMACDAutoNegDelete | 0 | 0 | create/delete parameter, dflt = created |
| 1.3.6.1.4.1.18.3.4.16.1.1.2 | wfCSMACDAutoNegSlot | 0 | 0 | instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.16.1.1.3 | wfCSMACDAutoNegConnector | 0 | 0 | instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connect… |
| 1.3.6.1.4.1.18.3.4.16.1.1.4 | wfCSMACDAutoNegSpeedSelect | 0 | 0 | This value indicates the configured speed of the local interface. This parameter allows configuration of a specific speed and du… |
| 1.3.6.1.4.1.18.3.4.16.1.1.5 | wfCSMACDAutoNegRemoteSignaling | 0 | 0 | This value indicates whether the remote end of the link is operating Auto Negotiation signaling or not. It shall take the value… |
| 1.3.6.1.4.1.18.3.4.16.1.1.6 | wfCSMACDAutoNegState | 0 | 0 | This value indicates whether Auto Negotiation signaling is in progress or has completed. NOTE: This parameter is only valid if Sp… |
| 1.3.6.1.4.1.18.3.4.16.1.1.7 | wfCSMACDAutoNegRestartAutoConfig | 0 | 0 | Writing any value to this attribute forces Auto Negotiation to begin link re-negotiation. This action has no effect if Auto Nego… |
| 1.3.6.1.4.1.18.3.4.16.1.1.9 | wfCSMACDAutoNegAdvertisedCapability | 0 | 0 | This is a GAUGE because this attribute is 32-bit unsigned, non-increasing A successful set operation will result in immediate li… |
| 1.3.6.1.4.1.18.3.4.16.1.1.10 | wfCSMACDAutoNegReceivedCapability | 0 | 0 | This is a GAUGE because this attribute is 32-bit unsigned, non-increasing A value that uniquely identifies the set of capabiliti… |