Sig Protocol Standard, Uni3.0, Uni3.1, or Trillium Symmetrical Uni (sub)
Parsed from file atm.mib.txt
Company: None
Module: Wellfleet-ATM-MIB
Sig Protocol Standard, Uni3.0, Uni3.1, or Trillium Symmetrical Uni (sub)
Parsed from file Wellfleet-ATM-MIB.mib
Module: Wellfleet-ATM-MIB
Vendor: Wellfleet
Module: Wellfleet-ATM-MIB
[Automatically extracted from oidview.com]
wfAtmSigStandard OBJECT-TYPE SYNTAX INTEGER { v30(1), v31(2), v40(3), sym(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Sig Protocol Standard, Uni3.0, Uni3.1, or Trillium Symmetrical Uni (sub)" DEFVAL { v30 } ::= { wfAtmSigEntry 15 }
wfAtmSigStandard OBJECT-TYPE SYNTAX INTEGER { v30(1), v31(2), v40(3), sym(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Sig Protocol Standard, Uni3.0, Uni3.1, or Trillium Symmetrical Uni (sub)" DEFVAL { v30 } ::= { wfAtmSigEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.4.23.1.7.1.1 | wfAtmSigDelete | 0 | 0 | Create/Delete parameter. Default is created. |
1.3.6.1.4.1.18.3.4.23.1.7.1.2 | wfAtmSigDisable | 0 | 0 | Enable/Disable parameter |
1.3.6.1.4.1.18.3.4.23.1.7.1.3 | wfAtmSigLineNumber | 0 | 0 | Instance identifier. This value is the line number of the router. |
1.3.6.1.4.1.18.3.4.23.1.7.1.4 | wfAtmSigAtmCct | 0 | 0 | Circuit number of ATM driver associated with this Q.93B instance |
1.3.6.1.4.1.18.3.4.23.1.7.1.5 | wfAtmSigState | 0 | 0 | Indicates the state of the Q.93B entity |
1.3.6.1.4.1.18.3.4.23.1.7.1.6 | wfAtmSigMaxServiceUsers | 0 | 0 | Max number of SAPs (service access points) allowed for users to connect |
1.3.6.1.4.1.18.3.4.23.1.7.1.7 | wfAtmSigMaxPtPtConnections | 0 | 0 | Max number of simultaneous point to point connections allowed per port |
1.3.6.1.4.1.18.3.4.23.1.7.1.8 | wfAtmSigMaxPtMultConnections | 0 | 0 | Max number of simultaneous point to multipt connections allowed per port |
1.3.6.1.4.1.18.3.4.23.1.7.1.9 | wfAtmSigMaxPartiesInMultConnect | 0 | 0 | Max number of simultaneous parties in a point to multipoint connection |
1.3.6.1.4.1.18.3.4.23.1.7.1.10 | wfAtmSigMaxRoutingRegistrations | 0 | 0 | Max number of registrations / routing entries allowed per port |
1.3.6.1.4.1.18.3.4.23.1.7.1.11 | wfAtmSigMinBufferThreshold | 0 | 0 | Min percentage of buffer pool that must be free to enable new calls (sub) |
1.3.6.1.4.1.18.3.4.23.1.7.1.12 | wfAtmSigTimerResolution | 0 | 0 | Number of system ticks elapsed between successive timer events in tenths |
1.3.6.1.4.1.18.3.4.23.1.7.1.13 | wfAtmSigVpi | 0 | 0 | Virtual Path Identifier for the Signalling VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.14 | wfAtmSigVci | 0 | 0 | Virtual Channel Identifier for the Signalling VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.16 | wfAtmSigInterfaceType | 0 | 0 | Network Interface type, either USER or NETWORK side (sub) |
1.3.6.1.4.1.18.3.4.23.1.7.1.17 | wfAtmSigMinVciPtPt | 0 | 0 | Minimum VCI number that can be associated with a Point to Point VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.18 | wfAtmSigMaxVciPtPt | 0 | 0 | Maximum VCI number that can be associated with a Point to Point VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.19 | wfAtmSigMinVpiPtPt | 0 | 0 | Minimum VPI number that can be associated with a Point to Point VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.20 | wfAtmSigMaxVpiPtPt | 0 | 0 | Maximum VPI number that can be associated with a Point to Point VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.21 | wfAtmSigMinVciPtMltPt | 0 | 0 | Minimum VCI number that can be associated with a Point to Multipoint VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.22 | wfAtmSigMaxVciPtMltPt | 0 | 0 | Maximum VCI number that can be associated with a Point to Multipoint VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.23 | wfAtmSigMinVpiPtMltPt | 0 | 0 | Minimum VPI number that can be associated with a Point to Multipoint VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.24 | wfAtmSigMaxVpiPtMltPt | 0 | 0 | Maximum VPI number that can be associated with a Point to Multipoint VC |
1.3.6.1.4.1.18.3.4.23.1.7.1.25 | wfAtmSigT303 | 0 | 0 | Q.93B Setup Sent Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.26 | wfAtmSigT308 | 0 | 0 | Q.93B Release Sent Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.27 | wfAtmSigT309 | 0 | 0 | Q.93B - SAAL Data Link Connect Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.28 | wfAtmSigT310 | 0 | 0 | Q.93B Call Proceeding Received Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.29 | wfAtmSigT313 | 0 | 0 | Q.93B Connect Sent Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.30 | wfAtmSigT316 | 0 | 0 | Q.93B Restart Request Sent on Interface Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.31 | wfAtmSigT316c | 0 | 0 | Q.93B Restart Request Sent on Channel Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.32 | wfAtmSigT322 | 0 | 0 | Q.93B Status Enquiry Sent Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.33 | wfAtmSigTDisc | 0 | 0 | Q.93B SAAL Data Link Disconnect Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.34 | wfAtmSigT398 | 0 | 0 | Q.93B Drop Party Sent Timer - Multipoint Connections only |
1.3.6.1.4.1.18.3.4.23.1.7.1.35 | wfAtmSigT399 | 0 | 0 | Q.93B Add Party Sent Timer - Multipoint Connections only |
1.3.6.1.4.1.18.3.4.23.1.7.1.36 | wfAtmSigNumRst | 0 | 0 | Number of restarts to be retransmitted before link considered down |
1.3.6.1.4.1.18.3.4.23.1.7.1.37 | wfAtmSigNumStat | 0 | 0 | Number of status enquiries to be retransmitted before link considered down |
1.3.6.1.4.1.18.3.4.23.1.7.1.38 | wfAtmSigRestart | 0 | 0 | Q.93B send restart when the link comes up. (sub) |
1.3.6.1.4.1.18.3.4.23.1.7.1.39 | wfAtmSigDebug | 0 | 0 | This flag will enable certain debug messages depending on the value set. The values are as follows: 1 - disable debugging 2 - Sign… |
1.3.6.1.4.1.18.3.4.23.1.7.1.40 | wfAtmSigCallsSec | 0 | 0 | The number of signaling messages per second allowed to flow out of the interface (call pacing). Zero turns this feature off. |
1.3.6.1.4.1.18.3.4.23.1.7.1.41 | wfAtmSigT301 | 0 | 0 | Q.93B Alert Received Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.42 | wfAtmSigT304 | 0 | 0 | Q.93B Setup Ack Received Timer |
1.3.6.1.4.1.18.3.4.23.1.7.1.43 | wfAtmSigT397 | 0 | 0 | Q.93B Alerting or Add Party Alterting Received Timer |