Number of Rx characters dropped due to lack of buffer resources
Parsed from file bisync.mib.txt
Company: None
Module: Wellfleet-BISYNC-MIB
Number of Rx characters dropped due to lack of buffer resources
Parsed from file Wellfleet-BISYNC-MIB.mib
Module: Wellfleet-BISYNC-MIB
Vendor: Wellfleet
Module: Wellfleet-BISYNC-MIB
[Automatically extracted from oidview.com]
wfBisyncRxLackRescsChar OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Rx characters dropped due to lack of buffer resources" ::= { wfBisyncEntry 39 }
wfBisyncRxLackRescsChar OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of Rx characters dropped due to lack of buffer resources" ::= { wfBisyncEntry 39 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.27.1.1.1 | wfBisyncDelete | 0 | 0 | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.27.1.1.2 | wfBisyncDisable | 0 | 0 | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.27.1.1.3 | wfBisyncCct | 0 | 0 | CCT number for this line instance |
| 1.3.6.1.4.1.18.3.4.27.1.1.4 | wfBisyncMtu | 0 | 0 | MTU parameter, this is buffer size for BISYNC media, fixed |
| 1.3.6.1.4.1.18.3.4.27.1.1.5 | wfBisyncMediaType | 0 | 0 | Media type selection is provided via this parameter |
| 1.3.6.1.4.1.18.3.4.27.1.1.6 | wfBisyncCableType | 0 | 0 | Type of Cable attached to the Bisync port - this is needed for V.25bis and Raise DTR to properly communicate with the modem |
| 1.3.6.1.4.1.18.3.4.27.1.1.7 | wfBisyncClkSource | 0 | 0 | Tx/Rx clock source is either internally or external generated. |
| 1.3.6.1.4.1.18.3.4.27.1.1.8 | wfBisyncClkSpeed | 0 | 0 | Tx/Rx clock speed. This speed selection is valid when either internal or external clocking is selected. In some cases, router s… |
| 1.3.6.1.4.1.18.3.4.27.1.1.9 | wfBisyncService | 0 | 0 | Service Type selection is provided via this parameter. The supported services can be selected per interface. |
| 1.3.6.1.4.1.18.3.4.27.1.1.10 | wfBisyncCfgTxQueueLength | 0 | 0 | Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special mea… |
| 1.3.6.1.4.1.18.3.4.27.1.1.11 | wfBisyncCfgRxQueueLength | 0 | 0 | Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special mean… |
| 1.3.6.1.4.1.18.3.4.27.1.1.12 | wfBisyncCharMode | 0 | 0 | Control Character Mode - ASCII/EBCDIC |
| 1.3.6.1.4.1.18.3.4.27.1.1.13 | wfBisyncLineNumber | 0 | 0 | line number for this line instance |
| 1.3.6.1.4.1.18.3.4.27.1.1.14 | wfBisyncRtsEnable | 0 | 0 | The RTS parameter enables/disables detection of RTS signals on the interface. Normal default mode is running without RTS enabled |
| 1.3.6.1.4.1.18.3.4.27.1.1.15 | wfBisyncExternalClkSpeed | 0 | 0 | External Clock Speed. If external clocking is configured, this attribute should be set to the clock speed of the externally suppl… |
| 1.3.6.1.4.1.18.3.4.27.1.1.16 | wfBisyncModule | 0 | 0 | Module number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used |
| 1.3.6.1.4.1.18.3.4.27.1.1.17 | wfBisyncActualConnector | 0 | 0 | Actual Connector Number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used. |
| 1.3.6.1.4.1.18.3.4.27.1.1.18 | wfBisyncConnector | 0 | 0 | Instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connect… |
| 1.3.6.1.4.1.18.3.4.27.1.1.19 | wfBisyncSlot | 0 | 0 | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.27.1.1.20 | wfBisyncActiveCct | 0 | 0 | Active CCT number for this line instance |
| 1.3.6.1.4.1.18.3.4.27.1.1.21 | wfBisyncState | 0 | 0 | Line Driver state variable, Not Present, DSR Wait, Init, Down, Up |
| 1.3.6.1.4.1.18.3.4.27.1.1.22 | wfBisyncLastState | 0 | 0 | The state which the driver was in prior to the most recent re-initiali- zation. |
| 1.3.6.1.4.1.18.3.4.27.1.1.23 | wfBisyncRxOctets | 0 | 0 | Number of octets received without error |
| 1.3.6.1.4.1.18.3.4.27.1.1.24 | wfBisyncTxOctets | 0 | 0 | Number of octets transmitted without error |
| 1.3.6.1.4.1.18.3.4.27.1.1.25 | wfBisyncRxFrames | 0 | 0 | Number of frames received without error |
| 1.3.6.1.4.1.18.3.4.27.1.1.26 | wfBisyncTxFrames | 0 | 0 | Number of frames transmitted without error |
| 1.3.6.1.4.1.18.3.4.27.1.1.27 | wfBisyncRxErrors | 0 | 0 | Number of receive errors |
| 1.3.6.1.4.1.18.3.4.27.1.1.28 | wfBisyncTxErrors | 0 | 0 | Number of transmission errors |
| 1.3.6.1.4.1.18.3.4.27.1.1.29 | wfBisyncTxLackRescs | 0 | 0 | Number of frames clipped in driver's transmit routine due to transmit congestion. |
| 1.3.6.1.4.1.18.3.4.27.1.1.30 | wfBisyncTxUnderFlows | 0 | 0 | Number of transmission underflows, device FIFO went empty before next DMA request was granted. |
| 1.3.6.1.4.1.18.3.4.27.1.1.31 | wfBisyncRxOverFlows | 0 | 0 | Number of receive overflows, device FIFO overflowed before next DMA cycle granted. No buffer resources available. |
| 1.3.6.1.4.1.18.3.4.27.1.1.32 | wfBisyncRxBadFrames | 0 | 0 | Number of bad receive frames, caused by FCS errors or non octet aligned. |
| 1.3.6.1.4.1.18.3.4.27.1.1.33 | wfBisyncRxRunts | 0 | 0 | Number of runt frames received |
| 1.3.6.1.4.1.18.3.4.27.1.1.34 | wfBisyncTxQueueLength | 0 | 0 | Current Transmit Queue Length. |
| 1.3.6.1.4.1.18.3.4.27.1.1.35 | wfBisyncRxQueueLength | 0 | 0 | Current Receive Queue Length. |
| 1.3.6.1.4.1.18.3.4.27.1.1.36 | wfBisyncRxReplenMisses | 0 | 0 | Number of packet buffer misses while attempting to replenish driver receive ring. |
| 1.3.6.1.4.1.18.3.4.27.1.1.37 | wfBisyncLastChange | 0 | 0 | The value of the SysUptime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as … |
| 1.3.6.1.4.1.18.3.4.27.1.1.38 | wfBisyncOutQLen | 0 | 0 | The instantaneous current length of the output packet queue |
| 1.3.6.1.4.1.18.3.4.27.1.1.40 | wfBisyncIsrBCZero | 0 | 0 | Number of interrupts with byte count zero |
| 1.3.6.1.4.1.18.3.4.27.1.1.41 | wfBisyncIsrBCSix | 0 | 0 | Number of interrupts with byte count six or more |
| 1.3.6.1.4.1.18.3.4.27.1.1.42 | wfBisyncIsrBCInvalid | 0 | 0 | Number of interrupts with an unexpected message byte |
| 1.3.6.1.4.1.18.3.4.27.1.1.43 | wfBisyncIsrBCErrors | 0 | 0 | Number of interrupt errors |
| 1.3.6.1.4.1.18.3.4.27.1.1.44 | wfBisyncLocalConnectionState | 0 | 0 | The state of the cable at the router end. |
| 1.3.6.1.4.1.18.3.4.27.1.1.45 | wfBisyncRemoteConnectionState | 0 | 0 | The state of the cable at the controller end. |
| 1.3.6.1.4.1.18.3.4.27.1.1.46 | wfBisyncAdditionalSyncPairs | 0 | 0 | The number of pairs of sync characters, in addition to the first pair, to send between frames. |