The time (in hundredths of a second) since the last
topology change was detected by the bridge.
Parsed from file span.mib.txt
Company: None
Module: Wellfleet-SPAN-MIB
The time (in hundredths of a second) since the last
topology change was detected by the bridge.
Parsed from file Wellfleet-Series7-MIB.mib
Module: Wellfleet-Series7-MIB
Vendor: Wellfleet
Module: Wellfleet-SPAN-MIB
[Automatically extracted from oidview.com]
wfBrStpTimeSinceTopologyChange OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The time (in hundredths of a second) since the last topology change was detected by the bridge." ::= { wfBrStp 6 }
wfBrStpTimeSinceTopologyChange OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION " The time (in hundredths of a second) since the last topology change was detected by the bridge. " ::= { wfBrStp 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.2.1.6.0 | wfBrStpTimeSinceTopologyChange | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.2.1.1 | wfBrStpBaseDelete | 1 | 1 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the Spa… |
| 1.3.6.1.4.1.18.3.5.1.2.1.2 | wfBrStpBaseEnable | 1 | 1 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the s… |
| 1.3.6.1.4.1.18.3.5.1.2.1.3 | wfBrStpBaseState | 1 | 1 | The current state of the spanning tree. |
| 1.3.6.1.4.1.18.3.5.1.2.1.4 | wfBrStpProtocolSpecification | 1 | 1 | The version of the Spanning Tree protocol being run. |
| 1.3.6.1.4.1.18.3.5.1.2.1.5 | wfBrStpBridgeID | 1 | 1 | The Spanning Tree Bridge ID assigned to this bridge. It is a 8-octet string. The first two octets make up the bridge priority, … |
| 1.3.6.1.4.1.18.3.5.1.2.1.7 | wfBrStpTopChanges | 1 | 1 | The total number of topology changes detected by this bridge since it was last reset or initialized |
| 1.3.6.1.4.1.18.3.5.1.2.1.8 | wfBrStpDesignatedRoot | 1 | 1 | The bridge ID of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by the bridge. This value … |
| 1.3.6.1.4.1.18.3.5.1.2.1.9 | wfBrStpRootCost | 1 | 1 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.18.3.5.1.2.1.10 | wfBrStpRootPort | 1 | 1 | The port identifier of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.18.3.5.1.2.1.11 | wfBrStpMaxAge | 1 | 1 | The maximum age of the Spanning Tree Protocol information learned from the network on any port before it is discarded, in hundred… |
| 1.3.6.1.4.1.18.3.5.1.2.1.12 | wfBrStpHelloTime | 1 | 1 | The amount of time between transmission of configuration BPDUs by this bridge on any port, when it is the root of the spanning tr… |
| 1.3.6.1.4.1.18.3.5.1.2.1.13 | wfBrStpHoldTime | 1 | 1 | The value that determines the interval length during which no more than two configuration BPDUs shall be transmitted by this brid… |
| 1.3.6.1.4.1.18.3.5.1.2.1.14 | wfBrStpForwardDelay | 1 | 1 | The time, in hundredths of a second, that a port on this bridge will stay in a transitional state (e.g. LISTENING) before moving … |
| 1.3.6.1.4.1.18.3.5.1.2.1.15 | wfBrStpBridgeMaxAge | 1 | 1 | The value that all bridges use for MaxAge when this bridge acting as the root. |
| 1.3.6.1.4.1.18.3.5.1.2.1.16 | wfBrStpBridgeHelloTime | 1 | 1 | The value that all bridges use for HelloTime when this bridge acting as the root. |
| 1.3.6.1.4.1.18.3.5.1.2.1.17 | wfBrStpBridgeForwardDelay | 1 | 1 | The value that all bridges use for ForwardDelay when this bridge acting as the root. |
| 1.3.6.1.4.1.18.3.5.1.2.1.18 | wfBrStpBaseTrueConverge | 1 | 1 | Enable/Disable parameter. Default is disabled. Allow spanning tree convergence times to become predictable and accurate to settin… |