This object reflects the current reply timeout, in tenths of
seconds, for an SDLC link station. If the link station does not
receive a repsonse to a poll or message before the specified time
expires then the appropriate error recovery shall be initiated.
This object has no meaning for secondary SDLC link stations.
Parsed from file sdlc.mib.txt
Company: None
Module: Wellfleet-SDLC-MIB
This object reflects the current reply timeout, in tenths of
seconds, for an SDLC link station. If the link station does not
receive a repsonse to a poll or message before the specified time
expires then the appropriate error recovery shall be initiated.
This object has no meaning for secondary SDLC link stations.
Parsed from file Wellfleet-SDLC-MIB.mib
Module: Wellfleet-SDLC-MIB
Vendor: Wellfleet
Module: Wellfleet-SDLC-MIB
[Automatically extracted from oidview.com]
wfSdlcLSOperREPLYTO OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects the current reply timeout, in tenths of seconds, for an SDLC link station. If the link station does not receive a repsonse to a poll or message before the specified time expires then the appropriate error recovery shall be initiated. This object has no meaning for secondary SDLC link stations." ::= { wfSdlcLSOperEntry 6 }
wfSdlcLSOperREPLYTO OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects the current reply timeout, in tenths of seconds, for an SDLC link station. If the link station does not receive a repsonse to a poll or message before the specified time expires then the appropriate error recovery shall be initiated. This object has no meaning for secondary SDLC link stations." ::= { wfSdlcLSOperEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.7.6.1.1 | wfSdlcLSOperIfIndex | 0 | 0 | The ifIndex value for the SDLC port which owns this link station. |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.2 | wfSdlcLSOperAddress | 0 | 0 | This value is the poll address of the secondary link station in this SDLC link. It uniquely identifies the SDLC link station with… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.3 | wfSdlcLSOperRole | 0 | 0 | This object reflects the current role that the link station is assuming. |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.4 | wfSdlcLSOperState | 0 | 0 | This object describes the operational state of the SDLC link station. The managed system shall attempt to keep this value consist… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.5 | wfSdlcLSOperMAXDATA | 0 | 0 | This object reflects the current maximum PDU size allowed for the logical link. This value includes the Transmission Header (TH) … |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.7 | wfSdlcLSOperMAXIN | 0 | 0 | This object reflects the current maximum number of unacknowledged frames which an SDLC link station may receive. This shall range… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.8 | wfSdlcLSOperMAXOUT | 0 | 0 | This object controls the maximum consequetive unacknowledged frames which an SDLC link station shall send without an acknowledgem… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.9 | wfSdlcLSOperMODULO | 0 | 0 | This object reflects the current modulus for an SDLC link station. This modulus determines the size of rotating acknowledgement w… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.10 | wfSdlcLSOperRETRIESm | 0 | 0 | This object controls number of retries in a retry sequence for an SDLC link station. A retry sequence is a series of retransmitte… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.11 | wfSdlcLSOperRETRIESt | 0 | 0 | This object reflects the current interval, in seconds, between retry sequences for an SDLC link station if multiple retry sequen… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.12 | wfSdlcLSOperRETRIESn | 0 | 0 | This object reflects the current number of times that a retry sequence is repeated for an SDLC link station. A retry sequence is… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.13 | wfSdlcLSOperRNRLIMIT | 0 | 0 | This object reflects the current length of time, in minutes, that an SDLC link station will allow its adjacent link station to re… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.14 | wfSdlcLSOperDATMODE | 0 | 0 | This object reflects whether the current communications mode with the adjacent link station is two-way-alternate (half) or two-wa… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.15 | wfSdlcLSOperCreateTime | 0 | 0 | This object describes the time, in 1/100ths of seconds, of the creation of this SDLC link station. |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.16 | wfSdlcLSOperLastFailCause | 0 | 0 | This enumerated object reflects the cause of the last failure of this SDLC link station. If the link station has not failed, the… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.17 | wfSdlcLSOperLastFailCtrlIn2 | 0 | 0 | This object reflects the last control octet or octets (depending on modulus) received by this SDLC link station at the time of th… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.18 | wfSdlcLSOperLastFailCtrlOut2 | 0 | 0 | This object reflects the last control octet or octets (depending on modulus) sent by this SDLC link station at the time of the la… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.19 | wfSdlcLSOperLastFailFRMRInfo5 | 0 | 0 | This object reflects the information field of the FRMR frame if the last failure for this SDLC link station was as a result of a… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.20 | wfSdlcLSOperLastFailREPLYTOs | 0 | 0 | This object reflects the number of times that the REPLYTO timer had expired for an SDLC link station at the time of the last fai… |
| 1.3.6.1.4.1.18.3.5.1.7.6.1.21 | wfSdlcLSOperGroupAddress | 0 | 0 | This value is the group poll address of the secondary link station for this SDLC link. If this link station is not part of a gro… |