Count of number of entries currently in route table
Parsed from file dvmrp.mib.txt
Company: None
Module: Wellfleet-DVMRP-MIB
Count of number of entries currently in route table
Parsed from file Wellfleet-DVMRP-MIB.mib
Module: Wellfleet-DVMRP-MIB
Vendor: Wellfleet
Module: Wellfleet-DVMRP-MIB
[Automatically extracted from oidview.com]
wfDvmrpBaseActualRoutes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of number of entries currently in route table" ::= { wfDvmrpBase 13 }
wfDvmrpBaseActualRoutes OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Count of number of entries currently in route table" ::= { wfDvmrpBase 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.12.1.13.0 | wfDvmrpBaseActualRoutes | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.3.12.1.1 | wfDvmrpBaseCreate | 1 | 1 | This entry will provide the base configuration for the DVMRP multicast support on the router. |
| 1.3.6.1.4.1.18.3.5.3.12.1.2 | wfDvmrpBaseEnable | 1 | 1 | Enable or disable DVMRP support in router |
| 1.3.6.1.4.1.18.3.5.3.12.1.3 | wfDvmrpBaseState | 1 | 1 | State of DVMRP base module |
| 1.3.6.1.4.1.18.3.5.3.12.1.4 | wfDvmrpBaseFullUpdateInterval | 1 | 1 | Full update interval. This value specifies, in seconds, how often routing messages containing complete routing tables are sent. |
| 1.3.6.1.4.1.18.3.5.3.12.1.5 | wfDvmrpBaseTriggeredUpdateInterval | 1 | 1 | Triggered update interval. This value specifies, in seconds, how often triggered routing messages are sent; this represents the m… |
| 1.3.6.1.4.1.18.3.5.3.12.1.6 | wfDvmrpBaseLeafTimeout | 1 | 1 | wfDvmrpBaseLeaftimeout |
| 1.3.6.1.4.1.18.3.5.3.12.1.7 | wfDvmrpBaseNeighborTimeout | 1 | 1 | Neighbor timeout. This value specifies, in seconds, how long a router neighbor is considered 'up' without confirmation. |
| 1.3.6.1.4.1.18.3.5.3.12.1.8 | wfDvmrpBaseRouteExpirationTimeout | 1 | 1 | Route Expiration timeout. This value specifies, in seconds, how long a route is considered valid without confirmation; this repre… |
| 1.3.6.1.4.1.18.3.5.3.12.1.9 | wfDvmrpBaseGarbageTimeout | 1 | 1 | Garbage timeout. This value specifies, in seconds, how long a route exists without confirmation; this represents the duration of … |
| 1.3.6.1.4.1.18.3.5.3.12.1.10 | wfDvmrpBaseEstimatedRoutes | 1 | 1 | Estimated number of routes, per slot. This is used for pre-allocating routing tables. Note that routes are kept on a per-source n… |
| 1.3.6.1.4.1.18.3.5.3.12.1.11 | wfDvmrpBaseNeighborProbeInterval | 1 | 1 | Neighbor probe interval: how often to send a probe on VIFs |
| 1.3.6.1.4.1.18.3.5.3.12.1.12 | wfDvmrpBaseRouteSwitchTimeout | 1 | 1 | wfDvmrpBaseRouteSwitchtimeout |
| 1.3.6.1.4.1.18.3.5.3.12.1.14 | wfDvmrpBaseDebugLevel | 1 | 1 | Turn DVMRP log ON or OFF for DVMRP debuging messages The levels are: NO_DISPLAY_LOG 0x0001 - Reserved ROUTE_UPDATE… |
| 1.3.6.1.4.1.18.3.5.3.12.1.15 | wfDvmrpBasePruningEnable | 1 | 1 | Enable or Disable Pruning functionality at the Base level |
| 1.3.6.1.4.1.18.3.5.3.12.1.16 | wfDvmrpBaseFragmentMtuThreshold | 1 | 1 | the default value is the CSMACD_MTU, and the MINiMUN is X25_DDN_MTU. Both are taken from dp.h |
| 1.3.6.1.4.1.18.3.5.3.12.1.17 | wfDvmrpBaseMaxRoutes | 1 | 1 | Max number of routes, per slot. This is used to limit the size of routing tables. Note that routes are kept on a per-source netwo… |
| 1.3.6.1.4.1.18.3.5.3.12.1.18 | wfDvmrpBasePolicyEnable | 1 | 1 | Enable or Disable route policy functionality at the Base level |
| 1.3.6.1.4.1.18.3.5.3.12.1.19 | wfDvmrpBaseHolddownEnable | 1 | 1 | Enable or Disable holddown of deleted routes. |