The Candidate Bootstrap Router IP address for PIM domain.
Parsed from file pim.mib.txt
Company: None
Module: Wellfleet-PIM-MIB
The Candidate Bootstrap Router IP address for PIM domain.
Parsed from file Wellfleet-PIM-MIB.mib
Module: Wellfleet-PIM-MIB
Vendor: Wellfleet
Module: Wellfleet-PIM-MIB
[Automatically extracted from oidview.com]
wfPimCBSRAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Candidate Bootstrap Router IP address for PIM domain." ::= { wfPim 21 }
wfPimCBSRAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "The Candidate Bootstrap Router IP address for PIM domain." ::= { wfPim 21 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.14.1.21.0 | wfPimCBSRAddress | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.5.3.14.1.1 | wfPimDelete | 1 | 1 | This is a global parameter that creates/deletes PIM in the box. Default is created. Users perform a set operation on this object … |
1.3.6.1.4.1.18.3.5.3.14.1.2 | wfPimDisable | 1 | 1 | This is a global parameter that enables/disables PIM in the box. Default is enabled. Users perform a set operation on this object… |
1.3.6.1.4.1.18.3.5.3.14.1.3 | wfPimState | 1 | 1 | The current state of the entire PIM. This state is up when PIM process is up and PIM global is created and enabled. This state i… |
1.3.6.1.4.1.18.3.5.3.14.1.4 | wfPimInfoWarning | 1 | 1 | Turn PIM log ON or OFF for PIM Info/Warning messages. The bit position is used to represent a PIM module: PIM_LOG_BOOTSTRAP_PROC … |
1.3.6.1.4.1.18.3.5.3.14.1.5 | wfPimDebug | 1 | 1 | Turn PIM log ON or OFF for PIM debugging messages. The bit position is used to represent a PIM module: PIM_LOG_BOOTSTRAP_PROC 0x… |
1.3.6.1.4.1.18.3.5.3.14.1.6 | wfPimTrace | 1 | 1 | Turn PIM log ON or OFF for PIM trace messages. The bit position is used to represent a PIM module: PIM_LOG_BOOTSTRAP_PROC 0x… |
1.3.6.1.4.1.18.3.5.3.14.1.7 | wfPimTotalCacheEntries | 1 | 1 | The total number of cache entries in the box. These are the (S,G), (*,G) and/or (*,*,RP) entries |
1.3.6.1.4.1.18.3.5.3.14.1.8 | wfPimJoinPruneInterval | 1 | 1 | The default interval at which periodic PIM-SM Join/Prune messages are to be sent |
1.3.6.1.4.1.18.3.5.3.14.1.9 | wfPimLastHopDataThresholdDisable | 1 | 1 | Enable/Disable Last Hop router to switch to SPT. Default is enabled. If enabled, the data rate is monitored at the last hop route… |
1.3.6.1.4.1.18.3.5.3.14.1.10 | wfPimLastHopDataThreshold | 1 | 1 | The data rate from the source in bytes per second at which the last hop router creates (S,G) state and switches to the shortest p… |
1.3.6.1.4.1.18.3.5.3.14.1.11 | wfPimRPDataThresholdDisable | 1 | 1 | Enable/Disable RP router to switch to SPT. Default is enabled. If enabled, the data rate is monitored at the RP responsible for t… |
1.3.6.1.4.1.18.3.5.3.14.1.12 | wfPimRPDataThreshold | 1 | 1 | The data rate from the source in bytes per second at which the RP router creates (S,G) state and switches to the shortest path tr… |
1.3.6.1.4.1.18.3.5.3.14.1.13 | wfPimThresholdSampleInterval | 1 | 1 | This is the sample interval in seconds during which the rate of the current data flow is calculated. This sampling time is in mu… |
1.3.6.1.4.1.18.3.5.3.14.1.14 | wfPimPMBREnable | 1 | 1 | Enable/Disable the router to be a PIM Border Router. Default is disabled. |
1.3.6.1.4.1.18.3.5.3.14.1.15 | wfPimHelloOptionGenIdDisable | 1 | 1 | Enable/Disable the Bay Networks Hello Neighbor Option in Hello packets to include a generation identifier. Default is enabled. By … |
1.3.6.1.4.1.18.3.5.3.14.1.16 | wfPimBSRAddress | 1 | 1 | The elected Bootstrap Router IP address for PIM domain. |
1.3.6.1.4.1.18.3.5.3.14.1.17 | wfPimBSRPriority | 1 | 1 | Priority for BSR - this is the priority of the elected BSR as the result of BSR election procedure. It may change over time when … |
1.3.6.1.4.1.18.3.5.3.14.1.18 | wfPimBSRHoldTime | 1 | 1 | The period at which BSR is declared down. This period is set to (2 * wfPimCBSRInterval) + 10 |
1.3.6.1.4.1.18.3.5.3.14.1.19 | wfPimBSRHashMaskLen | 1 | 1 | Hash mask length for the elected BSR as the result of BSR election procedure. It may change over time when the BSR address is swit… |
1.3.6.1.4.1.18.3.5.3.14.1.20 | wfPimCBSREnable | 1 | 1 | Enable/Disable router to be a Candidate BSR. Default is disabled. |
1.3.6.1.4.1.18.3.5.3.14.1.22 | wfPimCBSRPriority | 1 | 1 | Priority for Candidate BSR - used in election mechanism with IP ADDRESS of BSR |
1.3.6.1.4.1.18.3.5.3.14.1.23 | wfPimCBSRInterval | 1 | 1 | If this is the elected BSR, then this is the interval at which periodic Bootstrap (RP-Set) messages are transmitted (multicast ou… |
1.3.6.1.4.1.18.3.5.3.14.1.24 | wfPimCBSRHashMaskLen | 1 | 1 | The length of the hash-mask that is used to map a group to one of the C-RPs from RP-Set message |
1.3.6.1.4.1.18.3.5.3.14.1.25 | wfPimCRPEnable | 1 | 1 | Enable/Disable router to be a Candidate RP. Default is disabled. |
1.3.6.1.4.1.18.3.5.3.14.1.26 | wfPimCRPAddress | 1 | 1 | The Candidate RP IP address used to map the configured wfPimCRPGrPrefix. |
1.3.6.1.4.1.18.3.5.3.14.1.27 | wfPimCRPPriority | 1 | 1 | Priority for Candidate RP - used in hash mechanism to determine RP for the Group |
1.3.6.1.4.1.18.3.5.3.14.1.28 | wfPimCRPGrPrefix | 1 | 1 | The string of mask-len/group address for C-RP-Advs messages. If configured the router is considered to be a C-RP for the configur… |
1.3.6.1.4.1.18.3.5.3.14.1.29 | wfPimCRPAdvInterval | 1 | 1 | The interval at which periodic PIM-SM CRP Advertize messages are transmitted (unicast to the elected BSR) from a Candidate RP rou… |
1.3.6.1.4.1.18.3.5.3.14.1.30 | wfPimCRPHoldTime | 1 | 1 | This is to tell the BSR how soon the RP entry should be removed from the BSR's RP set table. This is set to 2.5 * wfPimCRPAdvInte… |
1.3.6.1.4.1.18.3.5.3.14.1.31 | wfPimRPRcvRegisterCacheTimeout | 1 | 1 | The timeout value for all entries whose inbound interface are created from receiving PIM Register packets in the RP router. If PI… |
1.3.6.1.4.1.18.3.5.3.14.1.32 | wfPimRPRegisterDisable | 1 | 1 | Enable/Disable parameter. Default is enabled. This is used to activate a RP Register process to efficiently handle forwarding of … |
1.3.6.1.4.1.18.3.5.3.14.1.33 | wfPimRegisterSuppressTimeout | 1 | 1 | The period used to suppress sending of PIM Register packets from the source DR when the RP is receiving data packets natively or … |
1.3.6.1.4.1.18.3.5.3.14.1.34 | wfPimProbeTime | 1 | 1 | The time between sending a null Register and the Register-Suppression-Timer expiring unless it is restarted by receiving a Regist… |
1.3.6.1.4.1.18.3.5.3.14.1.35 | wfPimCiscoCompatibilityEnable | 1 | 1 | Enable/Disable router to be compatible with Cisco PIM routers. This is to cope with those portions of Cisco's implementation that… |
1.3.6.1.4.1.18.3.5.3.14.1.36 | wfPimRfcComplianceDisable | 1 | 1 | Allows router to be compatible with those portions of implementation by other vendors which do not comply with the standards spec… |
1.3.6.1.4.1.18.3.5.3.14.1.37 | wfPimSSMEnable | 1 | 1 | Enable/Disable Source-Specific Multicast (SSM) in this router |
1.3.6.1.4.1.18.3.5.3.14.1.38 | wfPimECMPEnable | 1 | 1 | Enable/Disable Equal Cost Multi-Path for PIM SSM. This should be used together with wfIpMultipathMethod (wfIpBase.18) as well as … |