Allow the user to configure one host/mac addr for the whole box (default)
where, if configured, the CfgHostNumber is used (becomes ActiveHostNubmer)
otherwise if left unconfigured the ActiveHostNumber is discerned from the
backplane serial number. If Multiple host is Enabled and the host number is
configured in the interface record the configured value is used as the
hostid/mac addr of the interface (except Token Ring which can't go into
promiscous mode, uses Token Ring Mac as hostid/mac of interface). If the
host number in left unconfigured then the hostid/mac is gotten from the
mac of the circuit.
Parsed from file ipx.mib.txt
Company: None
Module: Wellfleet-IPX-MIB
Allow the user to configure one host/mac addr for the whole box (default)
where, if configured, the CfgHostNumber is used (becomes ActiveHostNubmer)
otherwise if left unconfigured the ActiveHostNumber is discerned from the
backplane serial number. If Multiple host is Enabled and the host number is
configured in the interface record the configured value is used as the
hostid/mac addr of the interface (except Token Ring which can't go into
promiscous mode, uses Token Ring Mac as hostid/mac of interface). If the
host number in left unconfigured then the hostid/mac is gotten from the
mac of the circuit.
Parsed from file Wellfleet-IPX-MIB.mib
Module: Wellfleet-IPX-MIB
Vendor: Wellfleet
Module: Wellfleet-IPX-MIB
[Automatically extracted from oidview.com]
wfIpxBaseMultipleHostAddrs OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS deprecated DESCRIPTION "Allow the user to configure one host/mac addr for the whole box (default) where, if configured, the CfgHostNumber is used (becomes ActiveHostNubmer) otherwise if left unconfigured the ActiveHostNumber is discerned from the backplane serial number. If Multiple host is Enabled and the host number is configured in the interface record the configured value is used as the hostid/mac addr of the interface (except Token Ring which can't go into promiscous mode, uses Token Ring Mac as hostid/mac of interface). If the host number in left unconfigured then the hostid/mac is gotten from the mac of the circuit." DEFVAL { enabled } ::= { wfIpxBase 15 }
wfIpxBaseMultipleHostAddrs OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS deprecated DESCRIPTION "Allow the user to configure one host/mac addr for the whole box (default) where, if configured, the CfgHostNumber is used (becomes ActiveHostNubmer) otherwise if left unconfigured the ActiveHostNumber is discerned from the backplane serial number. If Multiple host is Enabled and the host number is configured in the interface record the configured value is used as the hostid/mac addr of the interface (except Token Ring which can't go into promiscous mode, uses Token Ring Mac as hostid/mac of interface). If the host number in left unconfigured then the hostid/mac is gotten from the mac of the circuit." DEFVAL { enabled } ::= { wfIpxBase 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.5.1.15.0 | wfIpxBaseMultipleHostAddrs | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.5.1.1 | wfIpxBaseDelete | 1 | 1 | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete IPX. |
| 1.3.6.1.4.1.18.3.5.5.1.2 | wfIpxBaseDisable | 1 | 1 | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable IPX. |
| 1.3.6.1.4.1.18.3.5.5.1.3 | wfIpxBaseState | 1 | 1 | The current state of the entire IPX. |
| 1.3.6.1.4.1.18.3.5.5.1.4 | wfIpxBaseCfgHostNumber | 1 | 1 | Host Number of Router and potential MAC address of box. This host number will be used to overide the default box generated hostnu… |
| 1.3.6.1.4.1.18.3.5.5.1.5 | wfIpxBaseActiveHostNumber | 1 | 1 | Host Number of Router and potential MAC address of box. This is not a restart variable because this will be filled in from the IP… |
| 1.3.6.1.4.1.18.3.5.5.1.6 | wfIpxBaseNetCount | 1 | 1 | Count the total number of nets in the box. |
| 1.3.6.1.4.1.18.3.5.5.1.7 | wfIpxBaseServiceCount | 1 | 1 | Count the total number of saps in the box. |
| 1.3.6.1.4.1.18.3.5.5.1.8 | wfIpxBaseLogFilter | 1 | 1 | Filter out some log messages, Default filters out debugs, info, and trace messages. |
| 1.3.6.1.4.1.18.3.5.5.1.9 | wfIpxBaseNetTblSize | 1 | 1 | Tell me how much space to set aside when creating the forwarding and network tables. |
| 1.3.6.1.4.1.18.3.5.5.1.10 | wfIpxBaseRouterName | 1 | 1 | The Name of the Router, used for IPXWAN |
| 1.3.6.1.4.1.18.3.5.5.1.11 | wfIpxBasePrimaryNetNumber | 1 | 1 | The 'interfernal' network number, used for IPXWAN |
| 1.3.6.1.4.1.18.3.5.5.1.12 | wfIpxBaseRipMethod | 1 | 1 | Choose either Metric/Hops based or Tick based routing |
| 1.3.6.1.4.1.18.3.5.5.1.13 | wfIpxBaseMaximumPath | 1 | 1 | Declare Maximum number equal costs paths allowed for a given destination network |
| 1.3.6.1.4.1.18.3.5.5.1.14 | wfIpxBaseHostCount | 1 | 1 | Count the total number of hosts in the box. |
| 1.3.6.1.4.1.18.3.5.5.1.16 | wfIpxBaseNovellCertificationConformance | 1 | 1 | enable/disable novell certification, disable/enable wellfleet specifics |
| 1.3.6.1.4.1.18.3.5.5.1.17 | wfIpxBaseTrigUpdateEn | 1 | 1 | enable/disable triggered rip updates for Goldman Sax |
| 1.3.6.1.4.1.18.3.5.5.1.18 | wfIpxBaseNetSizeBoundEn | 1 | 1 | enable/disable maximum allowed size of the network table |
| 1.3.6.1.4.1.18.3.5.5.1.19 | wfIpxBaseMaxNetTblSize | 1 | 1 | maximum allowed size of the network table |
| 1.3.6.1.4.1.18.3.5.5.1.20 | wfIpxBaseNetTblFillNotify | 1 | 1 | notify when (configured) percentage is reached |