The time the last error occurred.
Parsed from file WFMIB.asn.txt
Company: None
Module: Wellfleet-Series7-MIB
The time the last error occurred.
Parsed from file Wellfleet-FR-MIB.mib
Module: Wellfleet-FR-MIB
Vendor: Wellfleet
Module: Wellfleet-FR-MIB
[Automatically extracted from oidview.com]
wfFr1ErrTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION " The time the last error occurred. " ::= { wfFrDlcmiEntry 23 }
wfFr1ErrTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time the last error occurred." ::= { wfFrDlcmiEntry 23 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.9.1.1.1.1 | wfFr1DlcmiDelete, wfFrDlcmiDelete | 0 | 0 | Indication to delete this frame relay interface |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.2 | wfFr1DlcmiDisable, wfFrDlcmiDisable | 0 | 0 | Indicates when a dlcmi entry is to be enabled or disabled. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.3 | wfFr1DlcmiState, wfFrDlcmiState | 0 | 0 | The current state of Frame Relay. The not present state is not actually valid except when the record is first added. It is incl… |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.4 | wfFr1DlcmiCircuit, wfFrDlcmiCircuit | 0 | 0 | Instance identifier. The circuit number of this entry |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.5 | wfFr1DlcmiManagementType, wfFrDlcmiManagementType | 0 | 0 | This variable indicates which Data Link Connection Management scheme is active (and by implication, what DLCI it uses). |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.6 | wfFr1DlcmiStatus, wfFrDlcmiStatus | 0 | 0 | Indicates the status of the interface. FR1_STATUS_START is the state during rebooting or initial start of circuit FR1_STATUS_RUNNI… |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.7 | wfFr1DlcmiAddress, wfFrDlcmiAddress | 0 | 0 | This states which address format is in use on the FR interface. The default is Q922 |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.8 | wfFr1DlcmiAddressLen, wfFrDlcmiAddressLen | 0 | 0 | This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the addr… |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.9 | wfFr1DlcmiPollingInterval, wfFrDlcmiPollingInterval | 0 | 0 | The number of seconds between successive status enquiry messages |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.10 | wfFr1DlcmiFullEnquiryInterval, wfFrDlcmiFullEnquiryInterval | 0 | 0 | The number of status enquiry intervals that pass before issuance of a full status enquiry message. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.11 | wfFr1DlcmiErrorThreshold, wfFrDlcmiErrorThreshold | 0 | 0 | This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.12 | wfFr1DlcmiMonitoredEvents, wfFrDlcmiMonitoredEvents | 0 | 0 | This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvent… |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.13 | wfFr1DlcmiMaxSupportedVCs, wfFrDlcmiMaxSupportedVCs | 0 | 0 | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. The system sets … |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.14 | wfFr1DlcmiMulticast, wfFrDlcmiMulticast | 0 | 0 | This indicates whether the frame relay provider offers a multicast |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.15 | wfFr1DlcmiSeqCount, wfFrDlcmiSeqCount | 0 | 0 | This station's sequence counter. It represents the next value to send. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.16 | wfFr1DlcmiLastReceived, wfFrDlcmiLastReceived | 0 | 0 | The sequence number just received from the switch. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.17 | wfFr1DlcmiPassiveSeqCount, wfFrDlcmiPassiveSeqCount | 0 | 0 | This station's sequence counter for answering status enquiry. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.18 | wfFr1DlcmiPassiveReceived, wfFrDlcmiPassiveReceived | 0 | 0 | The sequence number just received from the enquring station. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.19 | wfFr1DlcmiPolls, wfFrDlcmiPolls | 0 | 0 | This is the counter of where we are in the polling cycle. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.20 | wfFr1DlcmiAlarmTimer, wfFrDlcmiAlarmTimer | 0 | 0 | This is a counter of 1/2 second timeouts. When it reaches 2 x the polling interval, an enquiry message is sent. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.21 | wfFr1ErrType, wfFrErrType | 0 | 0 | Indicate the type of the last specific monitored error. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.22 | wfFr1ErrData, wfFrErrData | 0 | 0 | Contains as much of the error packet as possible. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.24 | wfFr1ErrDiscards, wfFrErrDiscards | 0 | 0 | The number of inbound frames dropped because of format or other errors or because the VC was not known. |
| 1.3.6.1.4.1.18.3.5.9.1.1.1.25 | wfFr1ErrDrops, wfFrErrDrops | 0 | 0 | The number of outbound frames dropped. Usually this is due the specified DLCI being unknown or a broadcast packet is too long |